Snap-In Aluminum MHT Series Electrolytic Capacitors MERITEK FEATURES PCB Mounting Very compact size (Smaller than MHS) High CV density Load life of 3000 hours at 85oC SPECIFICATIONS Item Characteristic 160V-250V: -40oC to +85oC 350V-450V: -25oC to +85oC Operating Temp Range Rated Working Voltage Capacitance Tolerance Leakage Current o (20 C) Dissipation Factor o Tanδ (120Hz, 20 C) 160 to 450VDC ±20% (M) O I≤0.02CV or 2mA, whichever is less (at 20 C after 5 minutes) I=DC Leakage current (A) C= Nominal capacitance (F) V= Rated voltage (VDC) Tanδ (120Hz, o 20 C) Low Temperature Characteristics 160 to 250 0.15 350 to 450 0.20 Impedance ratio at 120 Hz WV 160 to 250 350 to 450 Z -25OC/Z 20OC 4 8 Z -40OC/Z 20OC 12 After applying rated working voltage for 3000 hours at 85oC and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±20% of the initial value Load Life Tanδ ±200% of the initial specified value Leakage current The initial specified value After storage for 1000 hours at 85 oC with no voltage applied and then being stabilized at +20OC, capacitors shall meet following limits. Capacitance change Within ±15% of the initial value Shelf Life Tanδ 150% of the initial specified value Leakage current The initial specified value DIMENSIONS PART NUMBERING SYSTEM MHT 160V 222 M 22X25 Meritek Series Voltage Capacitance CODE F 222 2200 562 5600 153 15000 473 47000 Tolerance - M= ±20% Case size (diameter X length, in mm) RIPPLE CURRENT COEFFICIENT Frequency Freq (Hz) WV (V) 160 to 250 350 to 450 50 0.82 0.82 120 1.0 1.0 300 1.20 1.18 1K 1.37 1.23 10K 1.45 1.35 100K 1.50 1.40 Temperature Temperature Factor o ≤ 45 C 1.40 o 60 C 1.30 o 70 C 1.15 o 85 C 1.0 rev.7a Snap-In Aluminum MHT Series Electrolytic Capacitors 160(2C) W.V(V) Cap (μF) φ 22 φ 25 φ 30 200(2D) φ 35 φ 22 φ 25 φ 30 250(2E) φ 35 220 22x25 1.31 22x30 1.52 22x35 1.68 22x40 2.10 22x45 2.41 22x50 2.78 330 390 470 560 680 820 1000 22x25 1.43 22x30 1.73 22x35 2.04 22x40 2.26 22x45 2.65 22x50 2.94 1200 25x25 1.76 25x30 2.04 25x30 2.26 25x35 2.65 25x40 2.94 25x45 3.36 1500 1800 30x25 2.04 30x25 2.26 30x30 2.65 30x35 2.96 30x35 3.41 30x40 3.83 30x50 4.41 2200 2700 W.V(V) Cap (μF) 35x25 2.96 35x30 3.41 35x35 3.88 35x40 4.41 35x45 4.98 35x50 5.67 350(2V) φ 22 φ 25 φ 30 25x25 1.52 25x30 1.68 25x30 1.94 25x35 2.15 25x40 2.46 25x45 2.83 25x50 3.17 30x25 2.15 30x30 2.41 30x35 2.83 30x40 3.17 30x45 3.62 30x50 3.62 400(2G) φ 35 φ 22 φ 25 φ 30 22x25 0.68 22x30 0.84 22x30 1.08 22x35 1.15 22x40 1.26 22x45 1.42 120 150 180 220 270 330 390 470 560 680 22x25 0.74 22x30 0.89 22x35 1.05 22x35 1.36 22x40 1.36 22x50 1.63 25x25 0.89 25x25 1.05 25x30 1.20 25x35 1.36 25x40 1.63 25x45 1.78 25x50 2.05 30x25 1.20 30x30 1.36 30x30 1.63 30x35 1.78 30x40 2.05 30x45 2.42 30x50 2.67 35x30 1.78 35x35 2.05 35x35 2.42 35x40 2.67 35x45 2.95 25x25 0.84 25x25 1.08 25x30 1.15 25x35 1.26 25x40 1.40 25x45 1.65 25x50 1.85 30x25 1.15 30x25 1.26 30x30 1.42 30x35 1.63 30x40 1.85 30x45 2.10 30x50 2.44 25x25 1.36 25x30 1.55 25x30 1.78 25x35 2.05 25x40 2.25 25x45 2.57 φ 30 30x25 1.76 30x30 2.00 30x30 2.20 30x35 2.57 30x40 2.88 30x45 3.45 φ 35 35x25 2.25 35x30 2.57 35x35 2.88 35x40 3.45 35x45 3.67 35x50 4.20 450(2W) φ 35 φ 22 22x25 0.59 22x25 0.65 22x30 0.76 22x35 0.87 22x40 1.10 22x45 1.18 68 82 φ 25 35x25 2.78 35x30 3.15 35x35 3.62 35x40 4.09 35x45 4.67 35x50 5.20 35x70 5.69 56 100 φ 22 22x25 1.05 22x25 1.15 22x30 1.34 22x35 1.55 22x40 1.78 22x45 2.05 180 270 MERITEK 35x30 1.65 35x30 1.84 35x35 2.10 35x40 2.44 35x45 2.73 35x50 3.05 φ 25 25x25 0.76 25x30 0.87 25x30 1.10 25x35 1.15 25x40 1.30 25x45 1.47 φ 30 30x25 0.87 30x30 1.10 30x30 1.18 30x35 1.28 30x40 1.47 30x45 1.76 30x50 2.00 φ 35 35x30 1.45 35x35 1.76 35x40 2.00 35x45 2.20 35x50 2.50 IR : Maxium permissible ripple current [A(rms) at 85oC,120Hz] Case size [φ DxL (mm)] rev.7a