BULB7216 BUL7216 High voltage fast-switching NPN power transistor Features ■ Low spread of dynamic parameters ■ High voltage capability ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed 1 I2PAK TO-220 Applications ■ 3 12 3 2 Electronic ballast for fluorescent lighting (277 V push-pull and 347 V half bridge topoligies) 3 1 D2PAK Description The devices are manufactured using diffused collector technology to enhance switching speeds and tight hFE while maintaining the wide RBSOA. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking Package Packaging BUL7216 BUL7216 TO-220 Tube BULB7216-1 BULB7216 I2PAK Tube BULB7216T4 BULB7216 D2PAK Tape and reel November 2007 Rev 2 1/13 www.st.com 13 Contents BULB7216 - BUL7216 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 BULB7216 - BUL7216 1 Electrical ratings Electrical ratings Table 2. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 1600 V VCEO Collector-emitter voltage (IB = 0) 700 V VEBO Emitter-base voltage (IC = 0) 12 V Collector current 3 A Collector peak current (tP < 5ms) 6 A Base current 1 A IBM Base peak current (tP < 5ms) 2 A Ptot Total dissipation at Tc = 25°C 80 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 1.56 °C/W IC ICM IB TJ Table 3. Symbol Max. operating junction temperature Thermal data Parameter Rthj-case Thermal resistance junction - case 3/13 Electrical characteristics 2 BULB7216 - BUL7216 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter Test conditions VCE =1600 V ICES Collector cut-off current (VBE = 0) ICEO Collector cut-off current (IB = 0) VCE =680 V ICBO Collector cut-off current (IE = 0) VCB =1600 V VCB =1600 V IEBO Emitter cut-off current (IC = 0) VEB =12 V Collector-emitter V(BR)CEO(1) breakdown voltage (IB = 0) V(BR)EBO(1) Emitter-base breakdown voltage (IC = 0) Collector-emitter V(BR)CES(1) breakdown voltage (VBE = 0) VCE =1600 V TC = 125 °C Unit 0.1 0.5 mA mA 0.1 mA 0.1 0.5 mA 1 mA mA V IE = 1 mA 12 V 1600 V IC = 0.1 mA IB = 25 mA IB = 50 mA IB = 80 mA 1 1.5 3 V V V IB = 100 mA IB = 100 mA IB = 400 mA 1 1.1 1.2 V V V VBE(sat) (1) Base-emitter saturation voltage IC = 0.5 A _ IC = 1 A _ IC = 2 A _ DC current gain IC = 0.5 A _ VCE = 1 V IC = 0.5 A _ _ VCE = 3 V IC = 2 A _ _ VCE = 5 V IC = 1 A _ _ VCE = 10 V Resistive load Delay time Rise time Storage time Fall time IC = 0.5 A IB1 = 50 mA P.W.= 300 µs Repetitive avalanche energy Max. 700 IC = 0.25 A _ IC = 0.5 A _ IC = 0.8 A _ Ear Typ. IC = 1 mA Collector-emitter saturation voltage td tr ts tf L = 2 mH VBE(off) = -5 V 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5% 4/13 TC = 125 °C VCE(sat) (1) hFE (1) Min. 7 16 4 19 VCC = 125 V IB2 = -0.5 A D.C.= 2% 18 35 11 0.3 1.1 0.9 0.35 µs µs µs µs C = 1.8 nF 8 mJ BULB7216 - BUL7216 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Derating curve Figure 3. Reverse biased safe operating area Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector - emitter saturation Figure 7. voltage Base - emitter saturation voltage 5/13 Electrical characteristics Figure 8. 6/13 Resistive load switching time Figure 9. BULB7216 - BUL7216 Resistive load switching time BULB7216 - BUL7216 3 Test circuit Test circuit Figure 10. Energy rating test circuit Figure 11. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 7/13 Package mechanical data 4 BULB7216 - BUL7216 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/13 BULB7216 - BUL7216 Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.49 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 9/13 Package mechanical data BULB7216 - BUL7216 TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 10/13 TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 BULB7216 - BUL7216 Package mechanical data TO-263 (D2PAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.036 B2 1.14 1.70 0.044 0.067 C 0.45 0.60 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8.00 10.00 E1 0.368 0.315 10.40 0.393 8.50 0.409 0.334 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.4 0.050 0.055 L3 1.40 1.75 0.055 0.068 M 2.40 3.2 0.094 0.126 8o 0o R V2 0.40 0o - Weight : 1.38 g (typ.) - The planaty of the slug must be within 30 µm 0.016 8o P011P6/G 11/13 Revision history 5 BULB7216 - BUL7216 Revision history Table 5. 12/13 Document revision history Date Revision Changes 17-Jan-2006 1 First release. 28-Nov-2007 2 Added packages D2PAK and I2PAK BULB7216 - BUL7216 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13