5W AC-DC Single Output Wall-mounted type GS05U-USB Features : Universal AC input / Full range No load power consumption <0.3W Compact size Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage / Over temperature Pass LPS 100% full load burn-in test Fully enclosed plastic case Low cost, high reliability 2 years warranty SPECIFICATION GS05U-USB ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GUSB05 Note.2 5V RATED CURRENT 1.00A CURRENT RANGE 0 ~ 1.00A RATED POWER 5W RIPPLE & NOISE (max.) Note.3 90mVp-p VOLTAGE TOLERANCE Note.4 4.0% LINE REGULATION Note.5 1.0% LOAD REGULATION Note.6 4.0% SETUP, RISE, HOLD UP TIME 1500ms, 20ms, 15ms at full load 90 ~ 264VAC 127 ~ 370VDC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE INPUT EFFICIENCY (Typ.) Note.7 69% AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE 0.15A / 100VAC 35A / 230VAC 0.25mA / 240VAC 105 ~ 135% rated output voltage power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 160% rated output voltage, detect on main control IC Protection type : Hiccup mode, recovers automatically after fault condition is removed U1 Tj 135 typically (U1) detect on main control IC WORKING TEMP. Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +50 (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 8) -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA22.2 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMI CONDUCTION & RADIATION Compliance to FCC part 15 Class B 1100Khrs min. MIL-HDBK-217F(25 ) MTBF 41.86*32.76*23.8mm (L*W*H) OTHERS DIMENSION 26g ; 300pcs / 10.3Kg / CARTON PACKING USB Type A CONNECTOR PLUG NOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.Efficiency is measured at 115VAC. 8.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS05U-USB-SPEC 2011-03-31 GS05U-USB 5W AC-DC Single Output Wall-mounted type Mechanical Specification Unit:mm 41.86 12.7 17 32.76 5.05 23.8 12.5 13.05 12.4 21.9 22.4 USB Type A - + 4 1 100 LOAD (%) 100 LOAD (%) 2 Static Characteristics Derating Curve 60 -20 3 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 264 INPUT VOLTAGE File Name:GS05U-USB-SPEC 2011-03-31