April 5, 2013 SMD INDUCTOR DR335 SERIES Features Low Profile Surface Mount Design Inductance Range from 1.8 µH to 1000µH Operating Temp. -20°C to +80°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC PART No. INDUCTANCE (H) 1.8 20% 2.7 20% 4.7 20% 6.8 20% 8.2 20% 10 20% 12 20% 15 20% 18 20% 22 20% 27 10% 33 10% 39 10% 47 10% 56 10% 68 10% 82 10% 100 10% 120 10% 150 10% 180 10% 220 10% 270 10% 330 10% 390 10% 470 10% 680 10% 1000 10% DR335-182 DR335-272 DR335-472 DR335-682 DR335-822 DR335-103 DR335-123 DR335-153 DR335-183 DR335-223 DR335-273 DR335-333 DR335-393 DR335-473 DR335-563 DR335-683 DR335-823 DR335-104 DR335-124 DR335-154 DR335-184 DR335-224 DR335-274 DR335-334 DR335-394 DR335-474 DR335-684 DR335-105 DCR () Max. RATED CURRENT (A) Max. 0.035 0.041 0.048 0.050 0.055 0.06 0.07 0.08 0.10 0.11 0.13 0.14 0.16 0.20 0.24 0.28 0.37 0.44 0.47 0.64 0.71 0.96 1.11 1.26 1.77 1.96 2.20 3.96 3.50 3.30 3.00 2.70 2.50 2.30 2.00 1.80 1.61 1.50 1.30 1.20 1.10 1.10 0.94 0.85 0.78 0.72 0.66 0.58 0.51 0.49 0.42 0.40 0.36 0.34 0.25 0.23 @ 7.96MHz @ 7.96MHz @ 7.96MHz @ 7.96MHz @ 7.96MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 2.52MHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz @ 1kHz MECHANICAL OUTLINES 7.70±0.3 [0.303] 1.80 [0.071] 5.00 [0.197] 7.90 [0.311] 1.60 [0.063] 1 7.00±0.3 [0.276] 4.80 [0.189] XXX 7.20 [0.283] 2 TOP VIEW SIDE VIEW BOTTOM VIEW PCB SOLDER PAD LAYOUT (REF.) SCHEMATIC NOTES: 1. All dimensions are shown in millimeters “mm” [inches “in”]. 2. General tolerance 0.25mm [0.010 in.], unless otherwise specified. 3. Tape and reel quantity, 1000 pcs/reel. 4. Terminal finish is compliant to RoHS requirements 5. Solder in accordance with J-STD-002 Rev. D 6. Non-RoHS series parts 42-335-XXX are finished with leaded solder Sn60Pb40 or equivalent DATATRONIC: 28151Highway 74, Menifee, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.