AD HMC529LP5E Mmic vco w/ half frequency output Datasheet

HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
Dual Output: Fo = 12.4 - 13.4 GHz
Fo/2 = 6.2 - 6.7 GHz
• VSAT Radio
Pout: +8 dBm
• Point to Point/Multipoint Radio
Phase Noise: -110 dBc/Hz @100 kHz Typ.
• Test Equipment & Industrial Controls
No External Resonator Needed
• Military End-Use
32 Lead 5x5mm SMT Package: 25mm²
Functional Diagram
General Description
The HMC529LP5 & HMC529LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC529LP5 & HMC529LP5E integrate resonators, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscillator’s
monolithic structure. Power output is +8 dBm typical
from a +5V supply voltage. The prescaler function can
be disabled to conserve current if not required. The
voltage controlled oscillator is packaged in a leadless
QFN 5x5 mm surface mount package, and requires no
external matching components.
VCOS with Fo/2 OUTPUT - SMT
8
Electrical Specifications, TA = +25° C, Vcc1, Vcc2 = +5V
Parameter
Frequency Range
Power Output
Fo
Fo/2
RFOUT
RFOUT/2
RFOUT/4
Tune Voltage
Supply Current
Typ.
+4
+6
-9
-110
Vtune
Icc1 & Icc2
2
220
260
Output Return Loss
Pushing @ Vtune= 5V
Frequency Drift Rate
1/2
3/2
2nd
3rd
Units
GHz
GHz
+10
+11
-3
Tune Port Leakage Current (Vtune= 13V)
Harmonics/Subharmonics
Max.
12.4 - 13.4
6.2 - 6.7
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Pulling (into a 2.0:1 VSWR)
8-1
Min.
dBm
dBm
dBm
dBc/Hz
13
V
300
mA
10
µA
8
dB
25
34
18
35
dBc
dBc
dBc
dBc
5
MHz pp
6
MHz/V
1.2
MHz/°C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
Frequency vs. Tuning Voltage, T= 25°C
14
14
13.6
13.6
OUTPUT FREQUENCY (GHz)
13.2
12.8
12.4
12
11.6
+25C
+85C
-40C
11.2
10.8
13.2
12.8
12.4
12
11.6
Vcc= 4.75V
Vcc= 5.0V
Vcc= 5.25V
11.2
10.8
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
TUNING VOLTAGE (VOLTS)
800
12
700
11
+25C
+85C
-40C
500
400
300
200
100
6
7
8
9
10
11 12
13
8
+25C
+85C
-40C
10
9
8
7
6
5
0
4
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
TUNING VOLTAGE (VOLTS)
-75
-20
SSB Phase Noise (dBc/Hz)
0
-80
-85
-90
10 kHz Offset
100 kHz Offset
-100
2
3
4
5
6
7
8
9
10
11 12
13
SSB Phase Noise @ Vtune= +5V
-70
-95
1
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
SSB PHASE NOISE (dBc/Hz)
5
Output Power
vs. Tuning Voltage, Vcc= +5V
OUTPUT POWER (dBm)
SENSITIVITY (MHz/Volt)
Sensitivity vs. Tuning Voltage, Vcc= +5V
600
4
TUNING VOLTAGE (VOLTS)
-40
+25C
+85C
-40C
-60
-80
-100
-105
-120
-110
-140
-115
-120
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
11
12
13
-160
3
10
4
10
5
10
6
10
VCOS with Fo/2 OUTPUT - SMT
OUTPUT FREQUENCY (GHz)
Frequency vs. Tuning Voltage, Vcc = +5V
7
10
FREQUENCY OFFSET (Hz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
8-2
HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
RFOUT/2 Frequency
vs. Tuning Voltage, Vcc= +5V
RFOUT/2 Output Power
vs. Tuning Voltage, Vcc= +5V
7.2
12
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
11
6.8
6.4
6
+25C
+85C
-40C
5.6
10
9
8
7
6
5
4
+25C
+85C
-40C
3
2
1
5.2
0
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
TUNING VOLTAGE (VOLTS)
Divide-by-4 Frequency
vs. Tuning Voltage, Vcc= +5V
6
7
8
9
10
11 12
13
10
11 12
13
0
-1
3.4
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
VCOS with Fo/2 OUTPUT - SMT
8-3
5
Divide-by-4 Output Power
vs. Tuning Voltage, Vcc= +5V
3.6
8
4
TUNING VOLTAGE (VOLTS)
3.2
3
+25C
+85C
-40C
2.8
-2
+25C
+85C
-40C
-3
-4
-5
-6
-7
-8
-9
2.6
-10
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
TUNING VOLTAGE (VOLTS)
Absolute Maximum Ratings
4
5
6
7
8
9
TUNING VOLTAGE (VOLTS)
Typical Supply Current vs. Vcc
Vcc1, Vcc2
+5.5 Vdc
Vcc (V)
Icc (mA)
Vtune
0 to +15V
4.75
235
Junction Temperature
135 °C
5.00
260
5.25
275
Continuous Pdiss (T=85 °C)
(derate 37 mW/C above 85 °C
1.85 W
Thermal Resistance
(junction to ground paddle)
27 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Note: VCO will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
8
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC529LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL3
[1]
HMC529LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
[2]
Package Marking [3]
H529
XXXX
H529
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
1 - 3, 7 - 10, 13 - 18,
20, 22 - 28, 30 - 32
N/C
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4
RFOUT/4
Divide-by-4 Output.
6
Vcc1
Supply Voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve
65 mA of current.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
VCOS with Fo/2 OUTPUT - SMT
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
8-4
HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
Pin Descriptions
VCOS with Fo/2 OUTPUT - SMT
8
8-5
Pin Number
Function
Description
12
RFOUT/2
Half frequency output (AC coupled).
19
RF OUT
RF output (AC coupled).
21
Vcc2
Supply Voltage, +5V
29
VTUNE
Control Voltage and Modulation Input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varactor Tuned VCO” application note.
5, 11, Paddle
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
Interface Schematic
Typical Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
HMC529LP5 / 529LP5E
v04.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 12.4 - 13.4 GHz
Evaluation PCB
List of Materials for Evaluation PCB 110227 [1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5 - J6
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 µF Tantalum Capacitor
U1
HMC529LP5(E) VCO
PCB [2]
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Arlon 25FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or [email protected]
VCOS with Fo/2 OUTPUT - SMT
8
8-6
Similar pages