BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors Zener Diodes with Surge Current Specification FEATURES • Sillicon planar Zener diodes • Low profile surface-mount package • Zener and surge current specification • Low leakage current • Excellent stability • High temperature soldering: 260 °C/10 s at terminals • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3.6 to 200 V Test current IZT 5 to 100 mA VZ specification Pulse current Int. construction Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY BZD27C3V6P to BZD27C200P BZD27C3V6P to BZD27C200P-series-GS08 3000 per 7" reel (8 mm tape) 15 000/box BZD27C3V6P to BZD27C200P BZD27C3V6P to BZD27C200P-series-GS18 10 000 per 13" reel (8 mm tape) 10 000/box PACKAGE PACKAGE NAME WEIGHT DO-219AB (SMF) 15 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 SOLDERING CONDITIONS MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Non repetitive peak surge power dissipation (2) TEST CONDITION SYMBOL VALUE UNIT TL = 80 °C Ptot 2300 mW TA = 25 °C (1) Ptot 800 mW 100 μs square pulse PZSM 300 W 10/1000 μs waveform (BZD27-C7V5P to BZD27-C100P) PRSM 150 W 10/1000 μs waveform (BZD27-C100P to BZD27-C200P) PRSM 100 W RthJL 30 K/W RthJA 180 K/W Tj 150 °C Tstg - 55 to + 150 °C Junction to lead Junction to ambient air Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) Junction temperature Storage temperature range Notes (1) Mounted on epoxy-glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick) (2) T = 25 °C prior to surge J Rev. 2.1, 29-Nov-11 Document Number: 85810 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE (1) TEST CURRENT VZ at IZT1 IZT1 V mA MARKING CODE MIN. NOM. MAX. 3.6 3.8 REVERSE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT IR at VR ZZ at IZT1 VZ at IZT1 μA MAX. 100 100 V 1 %/°C TYP. MAX. MIN. MAX. 4 8 - 0.14 - 0.04 BZD27C3V6P D0 3.4 BZD27C3V9P D1 3.7 3.9 4.1 100 50 1 4 8 - 0.14 - 0.04 BZD27C4V3P D2 4 4.3 4.6 100 25 1 4 7 - 0.12 - 0.02 BZD27C4V7P D3 4.4 4.7 5 100 10 1 3 7 - 0.1 0 BZD27C5V1P D4 4.8 5.1 5.4 100 5 1 3 6 - 0.08 0.02 BZD27C5V6P D5 5.2 5.6 6 100 10 2 2 4 - 0.04 0.04 BZD27C6V2P D6 5.8 6.2 6.6 100 5 2 2 3 - 0.01 0.06 BZD27C6V8P D7 6.4 6.8 7.2 100 10 3 1 3 0 0.07 BZD27C7V5P D8 7 7.5 7.9 100 50 3 1 2 0 0.07 BZD27C8V2P D9 7.7 8.2 8.7 100 10 3 1 2 0.03 0.08 BZD27C9V1P E0 8.5 9.1 9.6 50 10 5 2 4 0.03 0.08 BZD27C10P E1 9.4 10 10.6 50 7 7.5 2 4 0.05 0.09 BZD27C11P E2 10.4 11 11.6 50 4 8.2 4 7 0.05 0.1 BZD27C12P E3 11.4 12 12.7 50 3 9.1 4 7 0.05 0.1 BZD27C13P E4 12.4 13 14.1 50 2 10 5 10 0.05 0.1 BZD27C15P E5 13.8 15 15.6 50 1 11 5 10 0.05 0.1 BZD27C16P E6 15.3 16 17.1 25 1 12 6 15 0.06 0.11 BZD27C18P E7 16.8 18 19.1 25 1 13 6 15 0.06 0.11 BZD27C20P E8 18.8 20 21.2 25 1 15 6 15 0.06 0.11 BZD27C22P E9 20.8 22 23.3 25 1 16 6 15 0.06 0.11 BZD27C24P F0 22.8 24 25.6 25 1 18 7 15 0.06 0.11 BZD27C27P F1 25.1 27 28.9 25 1 20 7 15 0.06 0.11 BZD27C30P F2 28 30 32 25 1 22 8 15 0.06 0.11 BZD27C33P F3 31 33 35 25 1 24 8 15 0.06 0.11 BZD27C36P F4 34 36 38 10 1 27 21 40 0.06 0.11 BZD27C39P F5 37 39 41 10 1 30 21 40 0.06 0.11 BZD27C43P F6 40 43 46 10 1 33 24 45 0.07 0.12 BZD27C47P F7 44 47 50 10 1 36 24 45 0.07 0.12 BZD27C51P F8 48 51 54 10 1 39 25 60 0.07 0.12 BZD27C56P F9 52 56 60 10 1 43 25 60 0.07 0.12 BZD27C62P G0 58 62 66 10 1 47 25 80 0.08 0.13 BZD27C68P G1 64 68 72 10 1 51 25 80 0.08 0.13 BZD27C75P G2 70 75 79 10 1 56 30 100 0.08 0.13 BZD27C82P G3 77 82 87 10 1 62 30 100 0.08 0.13 BZD27C91P G4 85 91 96 5 1 68 60 200 0.08 0.13 BZD27C100P G5 94 100 106 5 1 75 60 200 0.09 0.13 BZD27C110P G6 104 110 116 5 1 82 80 250 0.09 0.13 BZD27C120P G7 114 120 127 5 1 91 80 250 0.09 0.13 BZD27C130P G8 124 130 141 5 1 100 110 300 0.09 0.13 BZD27C150P G9 138 150 156 5 1 110 130 300 0.09 0.13 BZD27C160P H0 153 160 171 5 1 120 150 350 0.09 0.13 BZD27C180P H1 168 180 191 5 1 130 180 400 0.09 0.13 BZD27C200P H2 188 200 212 5 1 150 200 500 0.09 0.13 Notes • Maximum VF = 1.2 V, at IF = 0.2 A • Electrical characteristics when used as voltage regulator diodes (1) Pulse test: t 5 ms p Rev. 2.1, 29-Nov-11 Document Number: 85810 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER ZENER VOLTAGE RANGE TEST CURRENT REVERSE CURRENT CLAMPING VOLTAGE TEMPERATURE COEFFICIENT VZ at IZT1 IZT1 IR at VR VC at IRSM (1) VZ at IZT1 V mA MARKING CODE MIN. NOM. MAX. μA V MAX. V A MAX. %/C MIN. MAX. BZD27C7V5P D8 7 7.5 7.9 100 1500 6.2 11.3 13.3 0 0.07 BZD27C8V2P D9 7.7 8.2 8.7 100 1200 6.8 12.3 12.2 0.03 0.08 BZD27C9V1P E0 8.5 9.1 9.6 50 100 7.5 13.3 11.3 0.03 0.08 BZD27C10P E1 9.4 10 10.6 50 20 8.2 14.8 10.1 0.05 0.09 BZD27C11P E2 10.4 11 11.6 50 5 9.1 15.7 9.6 0.05 0.1 BZD27C12P E3 11.4 12 12.7 50 5 10 17 8.8 0.05 0.1 BZD27C13P E4 12.4 13 14.1 50 5 11 18.9 7.9 0.05 0.1 BZD27C15P E5 13.8 15 15.6 50 5 12 20.9 7.2 0.05 0.1 BZD27C16P E6 15.3 16 17.1 25 5 13 22.9 6.6 0.06 0.11 BZD27C18P E7 16.8 18 19.1 25 5 15 25.6 5.9 0.06 0.11 BZD27C20P E8 18.8 20 21.2 25 5 16 28.4 5.3 0.06 0.11 BZD27C22P E9 20.8 22 23.3 25 5 18 31 4.8 0.06 0.11 BZD27C24P F0 22.8 24 25.6 25 5 20 33.8 4.4 0.06 0.11 BZD27C27P F1 25.1 27 28.9 25 5 22 38.1 3.9 0.06 0.11 BZD27C30P F2 28 30 32 25 5 24 42.2 3.6 0.06 0.11 BZD27C33P F3 31 33 35 25 5 27 46.2 3.2 0.06 0.11 BZD27C36P F4 34 36 38 10 5 30 50.1 3 0.06 0.11 BZD27C39P F5 37 39 41 10 5 33 54.1 2.8 0.06 0.11 BZD27C43P F6 40 43 46 10 5 36 60.7 2.5 0.07 0.12 BZD27C47P F7 44 47 50 10 5 39 65.5 2.3 0.07 0.12 BZD27C51P F8 48 51 54 10 5 43 70.8 2.1 0.07 0.12 BZD27C56P F9 52 56 60 10 5 47 78.6 1.9 0.07 0.12 BZD27C62P G0 58 62 66 10 5 51 86.5 1.7 0.08 0.13 BZD27C68P G1 64 68 72 10 5 56 94.4 1.6 0.08 0.13 BZD27C75P G2 70 75 79 10 5 62 103.5 1.5 0.08 0.13 BZD27C82P G3 77 82 87 10 5 68 114 1.3 0.08 0.13 BZD27C91P G4 85 91 96 5 5 75 126 1.2 0.09 0.13 BZD27C100P G5 94 100 106 5 5 82 139 1.1 0.09 0.13 BZD27C110P G6 104 110 116 5 5 91 139 0.72 0.09 0.13 BZD27C120P G7 114 120 127 5 5 100 152 0.65 0.09 0.13 BZD27C130P G8 124 130 141 5 5 110 169 0.59 0.09 0.13 BZD27C150P G9 138 150 156 5 5 120 187 0.53 0.09 0.13 BZD27C160P H0 153 160 171 5 5 130 205 0.48 0.09 0.13 BZD27C180P H1 168 180 191 5 5 150 229 0.43 0.09 0.13 BZD27C200P H2 188 200 212 5 5 160 254 0.39 0.09 0.13 Notes • Maximum VF = 1.2 V, at IF = 0.2 A • Electrical characteristics when used as protection diodes (1) Non-repetitive peak reverse current in accordance with “IEC 60-1, section 8” (10/1000 μs pulse); see fig. 5 Rev. 2.1, 29-Nov-11 Document Number: 85810 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PRSM - Max. Pulse Power Dissipation (W) IF - Forward Current (A) 10 Max. VF Typ. VF 1 0.1 0.6 0.8 17411 1.0 1.2 1.4 160 140 120 100 80 60 40 20 0 1.6 VF - Forward Voltage (V) 0 50 Fig. 1 - Forward Current vs. Forward Voltage 100 150 200 VZnom - Zener Voltage (V) 17414 Fig. 4 - Maximum Pulse Power Dissipation vs. Zener Voltage CD - Typ. Junction Capacitance (pF) 10 000 C5V1P C6V8P IRSM (%) C18P C12P t1 = 10 µs t2 = 1000 µs 100 1000 90 50 100 C27P C51P 10 C200P 10 0 0.5 17412 1.0 1.5 2.0 2.5 17415 VR - Reverse Voltage (V) Fig. 2 - Typ. Diode Capacitance vs. Reverse Voltage t t1 3.0 t2 Fig. 5 - Non-Repetitive Peak Reverse Current Pulse Definition Ptot - Power Dissipation (W) 3.0 Tie point temperature 2.5 2.0 1.5 1.0 Ambient temperature 0.5 0 0 17413 25 50 75 100 125 150 Tamb - Ambient Temperature (°C) Fig. 3 - Power Dissipation vs. Ambient Temperature Rev. 2.1, 29-Nov-11 Document Number: 85810 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): DO219-AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 2.1, 29-Nov-11 Document Number: 85810 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZD27C3V6P to BZD27C200P www.vishay.com Vishay Semiconductors Blistertape Dimensions for SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 2.1, 29-Nov-11 Document Number: 85810 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000