RESISTORS PRECISION METAL FILM DMR 0.6W in 0.25W size 1%, E-96 values The DMR range is available in power ratings from 1/6W to 2W. The DMR25 offers a nominal 0.6W power rating in a standard 1/4W size. Resistors are manufactured to JIS-5202 specifications and tested following MIL-R-22684, giving repeatable performance between batches. All product is coloured light blue with an easily readable 5-colour code. Operating Temperature: -55°C to 155°C OUTLINE DRAWING D TYPE DMR12 DMR25 DMR100 DMR200 SECTION 4 d L H H L 3.3±0.4 6.3±0.5 11.5±1.0 15.5±1.0 øD 1.8±0.3 2.3±0.3 4.5±0.5 5.0±0.5 H 28±2.0 28±2.0 35±2.0 33±2.0 ød 0.5±0.05 0.6±0.05 0.8±0.05 0.8±0.05 RANGE Type DMR12 DMR25 DMR100 DMR200 Power/W 0.166 0.6 1 2 Range, E24 & E96 10Ω-1MΩ 10Ω-1MΩ 10Ω-1MΩ 10Ω-1MΩ Temperature Coefficient Max. 50ppm 50ppm 100ppm 100ppm Working Voltage (70°C) Max. 200 300 500 500 Overload Voltage (70°C) 400 600 1000 1000 ORDERING INFORMATION DMR 25 1 T 75R Type Tolerance Taping Value 12 = 0.166W 25 = 0.6W 100 = 1W 200 = 2W 1% = 1 0.5% = 05 0.1% = 01 BD = Tape and reel T = Tape and ammo in ohms * * Parts also available with 26mm width taping - add PT26 to end of part numbeR. High precision tolerance available to special order with extremely low ppm temperature coefficient e.g. 0.1% 15ppm Taping specification available on page 134. 128 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 RESISTORS PRECISION METAL FILM DMR SPECIFICATION PERFORMANCE TEST Short Time Overload Dielectric Withstanding Voltage Temperature Coefficient of Resistance Insulation Resistance Solderability Resistance to Solvent TEST METHOD JIS-C-5202 5.5 2.5 Times RCWV for 5 seconds JIS-C-5202 5.7 in V- Block for 60 seconds JIS-C-5202 5.2 -55˚C to 155˚C JIS-C-5202 5.6 in V-Block JIS-C-5202 6.5 260˚C for ±5 Seconds JIS-C-5202 6.9 Trichloroethane for 1 Min. with Ultrasonic Terminal Strength Pulse Overload Load Life in Humidity Direct Load for 10 Sec. in The Direction of Terminal Leads JIS-C-5202 5.8 4 Times RCWV 10000 Cycles (1 Sec. on, 25 Sec. off) JIS-C-5202 7.9 40±2˚C, 90~95% RH at RCWV for 1000 hrs. (1.5 Hrs. on, 0.5 Hrs. off) JIS-C-5202 7.10 70˚C at RCWV for 1000 Hrs. (1.5 Hrs. on, 0.5 Hrs off) JIS-C-5202 7.4 -55˚C Room Temp. 155˚C Room Temp. for 5 Cycles JIS-C-5202 6.4 350˚C ± 10˚C for 3±0.5 seconds Load Life Temperature Cycling Resistance to Soldering Heat APPRAISE ± (0.25%+0.05Ω) by Type by Type >10000MΩ 95% Min. Coverage No Deterioration of coatings & markings >2.5kg (24.5N) ±(2%+0.05Ω) ±(1.5%+0.05Ω) ±(1.5%+0.05Ω) ±(0.25%+0.05Ω) ±(0.25%+0.05Ω) SECTION 4 *Rated Continuous Working Voltage (RCWV) = √ Power Rating x Resistance Value POWER DE-RATING Percent Rated Load 100 80 60 40 20 0 0 20 40 70 100 120 140 155 Ambient Temperature /ϒC 180 CURRENT NOISE 1.0 �V/V 0.3 1/4W 0.1 0.03 1/2W 0.01 0.003 10 100 1k 10k 100k Nominal Resistance /� 1M 129 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758