1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/15-F02-BD-NLCM Features • Single fiber bi-directional operation • Laser diode with multi-quantum- well structure • Low threshold current • InGaAs/InP PIN Photodiode with trans-impedance amplifier • High sensitivity with AGC* • Differential ended output • Single +3.3V Power Supply • Integrated WDM coupler • Un-cooled operation from -40ºC to +85ºC • Hermetically sealed active component • LC BOSA • Design for fiber optic networks application Absolute Maximum Rating (Tc=25ºC) Parameter Fiber Output Power Symbol Value Unit Pf 1.5(M) mW V M LD Reverse Voltage VRLD 2 PIN-TIA Voltage VCC 4.5 V Operating Temperature Topr -40 to +85 ºC Storage Temperature Tstg -40 to +85 ºC (All optical data refer to a coupled 62.5/125µm Multimode fiber) Optical and Electrical Characteristics( Tc=25ºC) Parameter Laser Diode Symbol Min Typical Max Unit Test Condition Optical Output Power M 0.5 0.75 1 mW CW, Ith+ 20mA , kink free Peak Wavelength λ 1290 1310 1330 nm CW, Pf=Pf(Min) Spectrum Width (RMS) ∆λ - 2 5 nm CW, Pf=Pf(Min) Threshold Current Ith - 10 15 mA CW Forward Voltage VF - 1.2 1.5 V CW, Pf=Pf(Min) tr/ tf - - 0.5 ns Ibias=Ith ,10% to 90% Im 100 - - µA CW, Pf=Pf(Min),VRPD=2V Dark Current IDARK - - 0.1 µA VRPD=5V Capacitance Ct - 6 15 pF VRPD=5V, f=1MHz ∆Pf/Pf -1.5 - 1.5 dB APC, -40 to +85ºC Rise/Fall Time Monitor Diode Monitor Current Module Tracking Error Optical Crosstalk CRT < -40 dB Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS839-SEP2705 rev. A.1 1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/15-F02-BD-NLCM Detector λ=1480-1600nm DC Electrical Characteristics( Tc=25ºC) Parameter Symbol Min Typical Max Unit Test Condition Power Supply Vcc 3.0 3.3 3.6 V Differential Output Voltage Vd - - 1 V Supply Current (no load) F02 - - 35 mA Min Typical Max Unit Test Condition 1480 1550 1600 nm - G 52 - 70 V/mW Measure differentially, AC coupled, RL=50Ω Bandwidth BW 120 140 - MHz Saturation Power Psat -3 0 - dBm BER<10-10 @155Mbps PRBS 223-1,Er=10dB Sensitivity Sens. - -37 -35 dBm BER<10-10 @155Mbps PRBS 223-1,Er=10dB Output Resistance Rout - 50 - ohm AC/Optical and Electrical Characteristics( Tc=25ºC) Parameter Symbol Detection Range Gain @ 10 Mbps Differential LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS839-SEP2705 rev. A.1 1310nm Emitting,1550nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/15-F02-BD-NLCM Pin Assignment CASE LD PD Outline Demensions LUMINENTOIC.COM Units in mm. 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS839-SEP2705 rev. A.1 1310nm Emitting ,1550nm Receiving (PIN-TIA, 3.3V), Bi-directional Diplexer Optical Module C-13/15-F02-BD-NLCM Ordering Information C-13/15-F02-BD-NLCM 1310nm Transmitter 1550nm Receiver Package B=BOSA 02: 155 Mb/s PIN-TIA+3.3V Fiber Application N=62.5/125µm Pin Assignment D =D Type Fiber Output Power M Connector LC Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2005 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS839-SEP2705 rev. A.1