FE4J SINTERED GLASS JUNCTION FAST AVALANCHE RECTIFIER VOLTAGE： ：600V CURRENT: 3.0A FEATURE G-4 Glass passivated Hermetically sealed package Low reverse current Soft recovery characteristics MECHANICAL DATA Case: G-4 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FE4J units Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC blocking Voltage VDC 600 V Maximum Average Forward Rectified Current 3/8”lead length at Ta=55℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25℃ IFAV 3.0 A IFSM 100 A VF 1.6 V Maximum DC Reverse Current at VDC =600V and 25℃ IR 5.0 µA Maximum DC Reverse Current at VDC =650V and 25℃ IR 5.0 µA Maximum DC Reverse Current at VDC =700V and 25℃ IR 25.0 µA Maximum DC Reverse Current at VDC =600V and 100℃ IR 100 µA Maximum Reverse Recovery Time (Note 1) Trr 35 nS Typical Junction Capacitance (Note 2) Cj 100.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 20.0 ℃ /W Tstg, Tj -65 to +175 ℃ Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FE4J Rev.A2 www.gulfsemi.com