Allied MLB40-900-RC Multilayer ferrite bead Datasheet

RoHS
MLB30 thru 50
Multilayer Ferrite Beads
MLB30
MLB40
0.126±0.008
(3.20±0.20)
0.177±0.010
(4.50±0.25)
Inches
(mm)
0.063±0.008
(1.60±0.20)
0.098±0.008
(2.50±0.20)
0.063±0.008
(1.60±0.20)
0.051±0.008
(1.30±0.20)
0.020±0.012
(0.5±0.30)
0.020±0.012
(0.5±0.30)
0.071
(1.80)
0.079
(2.0)
Dimensions:
0.047
(1.2)
0.118
(3.00)
0.078
(0.99)
0.059
(1.50)
MLB50
0.177±0.010
(4.50±0.25)
Features
•
•
•
•
0.126±0.008
(3.20±0.20)
0.059±0.008
(1.50±0.20)
Surface mount EMI suppression components
Nickel barrier termination for excellent resistance to solder heat
Multi layer technology
Flow and reflow soldering
Electrical
0.020±0.012
(0.5±0.30)
0.094
(2.4)
0.118
(3.00)
Allied
Part
Number
Impedance (Ω)
@ 100 MHz
+/- 25%
0.059
(1.50)
DC
Resistance
(Ω) Max.
*Rated
Current
(mA)
Impedance Range:
MLB30 from 25Ω to 70Ω
MLB40 from 33Ω to 170Ω
MLB50 from 70Ω to 150Ω
Tolerance: 25% over entire range
Operating Range: -55ºC ~ +125ºC
Storage Temp: Under 25ºC at 40~60% Humidity
Rated Current: Based on temp rise not to exceed 30ºC
Resistance to Solder Heat
MLB30
MLB30-250-RC
MLB30-600-RC
MLB30-700-RC
25
60
70
0.10
0.20
0.20
500
500
500
0.20
0.20
0.20
0.20
0.30
0.30
0.30
0.30
600
600
600
600
500
500
500
500
MLB40
MLB40-330-RC
MLB40-500-RC
MLB40-600-RC
MLB40-800-RC
MLB40-900-RC
MLB40-101-RC
MLB40-151-RC
MLB40-171-RC
33
50
60
80
90
100
150
170
Pre-Heat 150ºC, 1 minute
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260±5ºC for 10sec ±1 sec.
Minimum of 75% of Electrode covered with new solder.
Impedance within 30% of initial value.
Test Equipment
(Z): HP4291A RF Impedance/Material Analyzer
(RDC): Chen Hwa 502BC
Physical
MLB50
MLB50-700-RC
MLB50-121-RC
MLB50-125-RC
MLB50-131-RC
MLB50-151-RC
70
120
125
130
150
0.30
500
0.30
500
0.30
500
0.30
500
0.30
500
*Temperature rise shall not be more than 30 °C at rated current.
All specifications are subject to change without notice.
714-665-1140
Packaging: MLB30 2500 per 7 inch reel.
MLB40 2000 per 7 inch reel.
MLB50 1000 per 7 inch reel.
Marking: None
ALLIED COMPONENTS INTERNATIONAL
REVISED 6/25/09
www.alliedcomponents.com