DC AXIAL FAN 60x60x25mm FAD1-06025 Series Features: Motor: Brushless DC Motor Protection: IC Bearing Type: Two Ball, Sleeve, or Hydro Dynamic Connection: UL 1007 AWG 24, 320mm Wire Leads Frame Material: Plastic UL94V-0 Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 70,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Model No. Volt. Current Power Rated Speed (VDC) (A) (W) (rpm) Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAD1-06025B * LW12 5 0.08 0.40 2500 0.373 13.200 0.063 1.600 18.1 53.0 FAD1-06025B * MW12 5 0.17 0.85 3500 0.506 17.880 0.125 3.175 27.9 53.0 FAD1-06025B * HW12 5 0.35 1.75 4500 0.688 24.330 0.207 5.257 36.3 53.0 FAD1-06025C * LW12 FAD1-06025C * MW12 12 0.04 0.48 2500 0.373 13.200 0.063 1.600 18.1 53.0 12 0.08 0.96 3500 0.506 17.880 0.125 3.175 27.9 53.0 FAD1-06025C * HW12 FAD1-06025C * JW12 12 0.13 1.56 4500 0.688 24.330 0.207 5.257 36.3 53.0 12 0.21 2.52 5000 0.789 27.880 0.242 6.146 37.6 53.0 FAD1-06025CBKW12 FAD1-06025D * LW12 12 0.30 3.60 6100 0.888 31.400 0.320 8.128 42.9 53.0 24 0.07 1.68 2500 0.373 13.200 0.063 1.600 18.1 53.0 FAD1-06025D * MW12 FAD1-06025D * HW12 24 0.06 1.44 3500 0.506 17.880 0.125 3.175 27.9 53.0 24 0.08 2.88 4500 0.688 24.330 0.207 5.257 36.3 53.0 FAD1-06025D * JW12 24 0.10 2.40 5000 0.789 27.880 0.242 6.146 37.6 53.0 * Indicates “B” (Ball Bearing), “S” (Sleeve), or “H” (Hydro Dynamic) Noise is measured at the distance of one (1) meter from the axis of intake. J K ISO-9001 Company Qualtek Electronics Corporation www.qualtekusa.com