Surface Mount Solid Aluminum Electrolytic Capacitors NPC Series FEATURES • LOW IMPEDANCE & ESR AT HIGH FREQUENCY RoHS • HIGH RIPPLE CURRENT Compliant • REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES includes all homogeneous materials • FITS EIA (7343) “D” LAND PATTERNS *See Part Number System for Details • Pb-FREE (GOLD TERMINATION PLATING) • COMPATIBLE WITH +250°C & +260°C* REFLOW SOLDERING *Refer to product tables for available +260°C values CHARACTERISTICS Rated Working Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current (µA) After 5 Minutes (+20°C) 2.0 ~ 8VDC 10 ~ 390µF -55 ~ +105°C ± 20% (M) Max. Tan δ, 120Hz, +20°C D1, D6 D7, D8 Capacitance Change <0.04CV High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage Tan δ Leakage Current Capacitance Change Moisture Resistance* 500 Hours @ +60°C at 90 ~ 95% RH and No Voltage Applied Tan δ Leakage Current <0.05 <0.1 Within ±20% of initial measured value D7, D8 (D1 10µF/6.3V) Less than 150% of specified max. value D1, D6 Less than 200% of specified max. value Less than specified max. value Within -20%/+40% of initial measured value D7, D8 Less than 150% of specified max. value D1, D6 Less than 200% of specified max. value Less than 300% of specified max. value Less than 500% of specified max. value for D1 10µF/6.3V *JEDEC MSL-3 STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+250°C Reflow) NPC101M2D1ZTRF NPC101M2D6XTRF NPC101M2D6ZTRF NPC121M2D6ZTRF NPC151M2D6ZTRF NPC181M2D6ZTRF NPC221M2D6ZTRF NPC221M2D7XTRF NPC271M2D8ZTRF NPC331M2D8ZTRF NPC391M2D8ZTRF NPC820M2.5D1ZTRF NPC820M2.5D6XTRF NPC820M2.5D6ZTRF NPC101M2.5D6ZTRF NPC121M2.5D6ZTRF NPC151M2.5D6ZTRF NPC181M2.5D7XTRF NPC221M2.5D8ZTRF NPC271M2.5D8ZTRF NPC331M2.5D8ZTRF NPC680M4D1ZTRF NPC680M4D6XTRF NPC680M4D6ZTRF NPC820M4D6XTRF NPC101M4D6XTRF NPC121M4D6XTRF NPC151M4D6XTRF NPC151M4D7XTRF NIC Part Number (+260°C Reflow) NPC101M2D1ZATRF NPC101M2D6XATRF NPC101M2D6ZATRF NPC221M2D7XATRF NPC820M2.5D1ZATRF NPC820M2.5D6XATRF NPC820M2.5D6ZATRF NPC181M2.5D7XATRF NPC680M4D1ZATRF NPC680M4D6XATRF NPC680M4D6ZATRF NPC151M4D7XATRF WV (Vdc) 2 2.5 4 Cap. (µF) 100 100 100 120 150 180 220 220 270 330 390 82 82 82 100 120 150 180 220 270 330 68 68 68 82 100 120 150 150 Max. LC (µA) 8.0 8.0 8.0 9.6 12.0 14.4 17.6 17.6 21.6 26.4 31.2 8.2 8.2 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 10.9 10.9 10.9 13.1 16.0 19.2 24.0 24.0 Tan δ 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 Height Max. Ripple Current Max. ESR 100KHz @ +105°C +20°C & 100KHz (Ω) H ± 0.1 3,000 0.009 1.4 3,000 0.013 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,500 0.010 2.7 3,500 0.007 2.9 3,500 0.007 2.9 3,500 0.007 2.9 3,000 0.009 1.4 3,000 0.013 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,000 0.009 1.9 3,500 0.010 2.7 3,500 0.007 2.9 3,500 0.007 2.9 3,500 0.007 2.9 3,000 0.009 1.4 3,000 0.013 1.9 3,000 0.009 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,500 0.010 2.7 ® 60 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Surface Mount Solid Aluminum Electrolytic Capacitors NPC Series STANDARD PRODUCTS AND SPECIFICATIONS NIC Part Number (+250°C Reflow) NPC181M4D8ZTRF NPC221M4D8ZTRF NPC271M4D8ZTRF NPC100M6.3D1TRF NPC330M6.3D6TRF NPC470M6.3D1XTRF NPC470M6.3D6XTRF NPC470M6.3D6ZTRF NPC560M6.3D6XTRF NPC680M6.3D6XTRF NPC820M6.3D6XTRF NPC101M6.3D6XTRF NPC101M6.3D7XTRF NPC121M6.3D8ZTRF NPC151M6.3D8ZTRF NPC150M8D6TRF NPC330M8D7XTRF WV (Vdc) NIC Part Number (+260°C Reflow) NPC330M6.3D6ATRF NPC470M6.3D1XATRF NPC470M6.3D6XATRF NPC101M6.3D7XATRF - Cap. (µF) 180 220 270 10 33 47 47 47 56 68 82 100 100 120 150 15 33 4.0 6.3 8 Max. LC (µA) 28.8 35.2 43.2 2.5 8.3 11.8 11.8 11.8 14.1 17.1 20.7 25.2 25.2 30.2 37.8 4.8 10.6 Tan δ 0.10 0.10 0.10 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.05 0.10 Max. Ripple Current Max. ESR Height 100KHz @ +105°C +20°C & 100KHz (Ω) H ± 0.1 3,500 0.009 2.9 3,500 0.009 2.9 3,500 0.009 2.9 1,900 0.050 1.4 3,000 0.015 1.9 3,000 0.010 1.4 3,000 0.013 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,000 0.010 1.9 3,500 0.010 2.7 3,500 0.009 2.9 3,500 0.009 2.9 3,000 0.015 1.9 3,000 0.013 2.7 PART NUMBERING SYSTEM RIPPLE CURRENT FREQUENCY CORRECTION FACTORS NPC 101 M 6.3 D7 X A TR F Frequency 1KHz <=f< 10KHz 10KHz <=f< 100KHz 100KHz <=f< 1MHz Correction Factor 0.6 0.85 1.0 RoHS Compliant Tape and Reel A - Denotes +260°C Reflow Temp. Performance Characteristic (X = std, Z = reduced ESR) Case Size Working Voltage (Vdc) Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant, third digits no. of zeros Series DIMENSIONS (mm) Case Code D1 D6 D7 D8 L ±0.2 W ±0.2 7.3 4.3 H ±0.1 1.4 1.9 2.7 2.9 W1 ±0.1 S ±0.2 2.4 1.3 TEMINATION MATERIAL: Cu: 100 ±8µm Ni: 0.5 ~ 2.0µm Pd: 0.02 ~ 0.07µm Au: 0.003 ~ 0.014µm H S W L + 220 d58 Series Indentifier Capacitance Value Lot Number NPC Anode Polarity Indicator Au: 0.003 ~ 0.014µm Pd: 0.02 ~ 0.07µm Ni: 0.5 ~ 2.0µm W1 Voltage Code VOLTAGE CODES Voltage 2.0VDC 2.5VDC 4.0VDC 6.3VDC 8.0VDC Code d e g j k PRECAUTIONS ® NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capactitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 61 Surface Mount Solid Aluminum Electrolytic Capacitors NPC Series RECOMMENDED LAND PATTERNS (mm) a 2.4 b 2.9 RECOMMENDED REFLOW SOLDERING PROFILE c 3.7 COMPONENT SURFACE TEMP. (oC) Case Code D1, D6, D7, D8 B A A C Peak Temperature 250oC or 260°C Max. for 5 sec. 260 250 230 NATURAL COOLING 200 Time Above 230°C 40 sec. max. 150 Pre-Heat 150oC ~ 180°C 100 30 sec. max. 120 Sec. Max. 50 TIME (SECONDS) APPLICATION NOTES: 1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current. 2. NPC parts are polarized so be sure to verify component orientation when mounting components. 3. Do not apply over voltage exceeding the rated voltage. 4. Do not apply ripple current over the specified maximum ripple current rating. REEL TAPE DIMENSIONS (mm) Case A ±1.0 B ±0.5 C ±0.2 Code D1, D6 330 80 13 D7, D8 TAPE DIMENSIONS (mm) Case A ±0.1 B ±0.1 Code D1 D6 4.55 7.65 D7 D8 C ±0.3 W ±0.5 t ±0.5 13.5 2.0 D ±0.05 E ±0.1 12.0 1.75 Reel Quantity 3,000 2,000 F ±0.1 G ±0.05 8.0 2.0 H ±0.1 4.0 J -0/+0.1 K ±0.1 t ±0.05 1.5 1.6 2.1 2.9 3.1 0.3 J G H E t 5.5 NOTES ON REFLOW SOLDERING: 1. SAC alloy (+217°C) reflow soldering compatible 2. Soldering heat limits apply to the top surface of component 3. If you have concerns about your reflow soldering profile review them with NIC to insure compatible [[email protected]] C D C B B K A F W A t ® 62 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com