3.0x2.0mm RIGHT ANGLE SMD LED Part Number: APBDA3020PBACGKC PRELIMINARY SPEC ATTENTION Blue Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mmx2.0mm SMT LED,2.8mm THICKNESS. The Blue source color devices are made with InGaN z LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z VARIOUS COLORS AND LENS TYPES AVAILABLE. The Green source color devices are made with InGaAlP on z IDEAL FOR BACK LIGHT AND INDICATOR GaAs substrate Light Emitting Diode. z PACKAGE : 2000PCS / REEL. Static electricity and surge damage the LEDS. z WHEN SOLDERED IN THE SIDEVIEW CONFIGURA- It is recommended to use a wrist band or anti-electrostatic TION, THE MAXIMUM SHEAR TOLERANCE OF THE glove when handling the LEDs. EPOXY LENS IS 300G. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203006470 Selection Guide Part No. Dice Lens Type Blue (InGaN) APBDA3020PBACGKC Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 110 220 180 320 2θ1/2 15° WATER CLEAR Green (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 574 nm IF=20mA Blue Green 470 570 nm IF=20mA Spectral Line Half-width Blue Green 21 20 nm IF=20mA C Capacitance Blue Green 100 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Green 3.2 2.1 4 2.5 V IF=20mA IR Reverse Current Blue Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Green Units Power dissipation 120 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 100 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203006470 APBDA3020PBACGKC Blue SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203006470 Green SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203006470 APBDA3020PBACGKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203006470 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG9428 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu APBDA3020PBACGKC DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203006470