Lumileds LXML-PWN2 High value and easy design-in Datasheet

ILLUMINATION
LUXEON Rebel ES
High value and easy design-in
LUXEON Rebel ES is a high flux LED that gives you the flexibility you
need to design luminaires and lamps for outdoor and industrial lighting
applications and bring them to market. Tested and binned at 700mA,
confidently design LUXEON Rebel ES into high lumen applications or
create more energy efficient devices using the same emitter. Luminaire
manufacturers and designers count on LUXEON Rebel ES for quality,
reliability and in-device performance.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
High lm/$ for cost competitive applications
High Bay & Low Bay
Broad portfolio of emitters for indoor and outdoor applications
Outdoor
CCT and CRI combinations to support a wide range of applications
Specialty Lighting
Extensive applications ecosystem for easy design-in and quick ROI
LM-80 test report available
RoHS
COMPLIANT
DS061 LUXEON Rebel ES Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Relative Spectral Distribution vs. Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Typical Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Typical Luminous Efficacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Typical Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Information
Product Nomenclature
LUXEON Rebel ES is tested and binned at 700mA, with current pulse duration of 20 ms. All characteristic charts
where the thermal pad is kept at constant temperature (25°C typically) are measured with current pulse duration of
20 ms. Under these conditions, junction temperature and thermal pad temperature are the same.
The LUXEON Rebel ES family of emitters contain a series of LEDs designed for Illumination applications.
The part number designation for the LXML series is explained as follows:
LXML-ABCD
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color (W for White)
C — designates color variant (C for Cool-White, N for Neutral-White)
D — designates test current (value 2 for 700mA)
The part number designation for the LXH7 series is explained as follows:
LXHA-BCDE
Where:
A — designates minimum CRI performance (value 7 = 70 minimum)
B — designates radiation pattern (value P for Lambertian)
C — designates color (value W = White)
D & E — designates nominal ANSI CCT (value 40 = 4000K))
Therefore products tested and binned at 700mA follow the part numbering scheme:
L X M L - P W x 2 and L X H 7 - P W x x
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
2
Average Lumen Maintenance Characteristics
Lumen maintenance for solid state lighting devices (LEDs) is typically defined in terms of the percentage of initial
light output remaining after a specified period of time. Lumileds projects that LUXEON Rebel ES products will
deliver, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of 1000mA.
This projection is based on constant current operation with junction temperature maintained at or below 135°C. This
performance is based on independent test data, Lumileds historical data from tests run on similar material systems,
and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to
achieve this projected lumen maintenance.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON
Rebel ES is compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not
intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
3
Product Selection Guide for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 1.
Performance at Test Current (700mA)
Nominal
CCT/Color
Part
Number
Minimum
CRI
Typical
CRI
Min Luminous
Flux (lm) [1]
4100K Neutral White
5650K Cool White
LXML-PWN2
60
65
200
LXML-PWC2
60
70
200
4000K
LXH7-PW40
70
75
180
Note for Table 1:
1. Minimum luminous flux performance within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on luminous flux measurements and ± 2 on
CRI measurements..
Typical Luminous Flux Characteristics at 350mA, 700mA and 1000mA for
LUXEON Rebel ES, Thermal Pad Temperature = 25°C
Table 2.
Nominal
CCT/Color
Part
Number
Typical Luminous Flux (lm)
@ 350mA Forward Current [1]
Typical Luminous Flux (lm)
@ 700mA Forward Current [1]
Typical Luminous Flux (lm)
@ 1000mA Forward Current [1]
4100K Neutral White
LXML-PWN2
130
230
310
5650K Cool White
LXML-PWC2
135
235
320
4000K
LXH7-PW40
114
205
279
Note for Table 2:
1. Typical luminous flux performance within published operating conditions. Lumileds maintains a tolerance of ± 6.5% on luminous flux measurments.
Optical Characteristics for LUXEON Rebel ES at Test Current [1]
Thermal Pad Temperature = 25°C
Table 3.
Color Temperature CCT
Minimum
Typical
Maximum
Typ Total
Included Angle [2]
u0.90V
4100K Neutral White
3500K
4100K
4500K
160°
120°
5650K Cool White
4500K
5650K
10000K
160°
120°
4000K
3710K
3985K
4260K
160°
120°
Part Number
Nominal
CCT
LXML-PWN2
LXML-PWC2
LXH7-PW40
Typ Viewing
Angle [3]
2u 1/2
Notes for Table 3:
1. Test current is 700mA for all LXML-PWx2 and LXH7-PWxx emitters.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
4
Electrical Characteristics at 700mA for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 4.
Forward Voltage Vf [1] (V)
Part Number
Nominal
CCT/Color
LXML-PWN2
LXML-PWC2
LXH7-PW40
Typ. Temperature
Coefficient
of Forward Voltage [2]
(mV/°C)
DVf / DTJ
Typical Thermal
Resistance
Junction to Thermal
Pad (°C/W)
Ru J-C
Minimum
Typical
Maximum
4100K Neutral White
2.5
2.90
3.25
-2.0 to -4.0
6
5650K Cool White
2.5
2.90
3.25
-2.0 to -4.0
6
4000K
2.5
2.90
3.25
-2.0 to -4.0
6
Notes for Table 4:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C = TJ = 110°C at If = 700mA.
Typical Electrical Characteristics at 350mA, 700mA and
1000mA for LUXEON Rebel ES
Thermal Pad Temperature = 25°C
Table 5.
Nominal
CCT/Color
Part Number
Typical Forward Voltage
Vf (V) @ 350mA
Forward Current
Typical Forward Voltage
Vf (V) @ 700mA
Forward Current
Typical Forward Voltage
Vf (V) @ 1000mA
Forward Current
4100K Neutral White
LXML-PWN2
2.75
3.00
3.10
5650K Cool White
LXML-PWC2
2.75
3.00
3.10
4000K
LXH7-PW40
2.75
3.00
3.10
Notes for Table 5:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
5
Absolute Maximum Ratings
Table 6.
Parameter
LUXEON Rebel ES
DC Forward Current (mA)
1000 [2]
Peak Pulsed Forward Current (mA)
1200 [3]
ESD Sensitivity
< 8000V Human Body Model (HBM)
Class 3A JESD22-A114-E
LED Junction Temperature [1]
150°C
Operating Case Temperature at 700mA
-40°C - 135°C
Storage Temperature
-40°C - 135°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vr)
LUXEON Rebel ES LEDs are not designed to be driven in reverse bias
Notes for Table 6:
1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application
Brief AB33.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple’, with frequencies ≥ 100 Hz and amplitude ≤ 200mA are acceptable,
assuming the average current throughout each cycle does not exceed 1000mA.
3. Pulsed operation with a peak drive current of 1200mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%.
JEDEC Moisture Sensitivity
Table 7.
1
Soak Requirements
Standard
Floor Life
Level
Time
Conditions
Time
Conditions
unlimited
[ 30°C /
85% RH
168h
+5/-0
85°C / 85%
RH
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
6
Reflow Soldering Characteristics
JEDEC 020c
Temperature profile for Table 8.
Table 8.
Profile Feature
Lead Free Assembly
Average Ramp-Up Rate (Tsmax to Tp)
3°C / second max
Preheat Temperature Min (Tsmin)
150°C
Preheat Temperature Max (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 - 180 seconds
Temperature (TL)
217°C
Time Maintained Above Temperature (TL)
60 - 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
20 - 40 seconds
Ramp - Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Notes for Table 8:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
2. For additional information on thermal measurement guidelines please refer to Application Brief AB33.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
7
Mechanical Dimensions
Figure 1. Package outline drawing.
Notes for Figure 1:
1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens.
2. Drawings not to scale.
3. All dimensions are in millimeters.
4. The thermal pad is electrically isolated from the anode and cathode contact pads.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
8
Pad Configuration
3
1
3
2
TOP
2
1
BOTTOM
PAD
FUNCTION
1
CATHODE
2
ANODE
3
THERMAL
Figure 2. Pad configuration.
Note for Figure 2:
1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Solder Pad Design
Figure 3. Solder pad layout.
Notes for Figure 3:
1. The photograph shows the recommended LUXEON Rebel ES layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W.
2. Application Brief AB32 provides extensive details for this layout. Printed Circuit Board layout files (.dwg) are available at www.lumileds.com.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
9
Relative Spectral Distribution vs. Wavelength Characteristics
LXML-PWN2 (4100K) Neutral White at Test Current
Thermal Pad Temperature = 25°C
Relative Spectral Power Distribution
ribution
1
0.8
0.6
0.4
0.2
0
350
400
450
500
550
600
650
700
750
800
Wavelength nm
Figure 4. Color spectrum of LXML-PWN2 emitter, integrated measurement.
LXML-PWC2 (5650K) Cool White at Test Current
Thermal Pad Temperature = 25°C
Relative Spectral Power Distribution
stribution
1
0.8
0.6
0.4
0.2
0
350
400
450
500
550
600
650
700
750
800
Wavelength nm
Figure 5. Color spectrum of LXML-PWC2 emitter, integrated measurement.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
10
LXH7-PW40 (4000K) at Test Current, Thermal Pad Temperature = 25°C
Rellative Spec
ctral Power Distributiion
1
0.8
0.6
0.4
0.2
0
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 6. Color spectrum of LXH7-PW40 emitter, integrated measurement.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
11
Typical Light Output Characteristics
Typical Relative Luminous Flux Vs. Temperature for LUXEON Rebel ES
Emitters at Test Current
1.200
1.100
1.000
Relativ
ve Lumino
ous Flux
0.900
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
-20
0.000
0
20
40
60
80
100
120
140
Thermal Pad Temperature [°C]
Figure 12. Relative light output vs. thermal pad temperature.
Typical Forward Current Characteristics
4100K Neutral White and 5650K Cool White at Test Current,
Thermal Pad Temperature = 25°C
1000
900
Forw
ward Curre
ent [mA]
800
700
600
500
400
300
200
100
0
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
3.00
3.05
Forward Voltage [V]
Figure 13. Forward current vs. forward voltage.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
12
Typical Luminous Efficacy
Typical Luminous Efficacy Characteristic vs. Forward Current for
4100K Neutral White and 5650K Cool White Emitters
1.600
Normalize
ed Lumino
ous Effica
acy
1 400
1.400
1.200
1.000
0.800
0 600
0.600
0.400
0.200
0.000
0
100
200
300
400
500
600
700
800
900
1000
Forward Current [mA]
Figure 14. Typical luminous efficacy characteristic vs. forward current, thermal pad temperature = 25°C.
Typical Relative Luminous Flux vs. Forward Current for
4100K Neutral White and 5650K Cool White Emitters.
Thermal Pad Temperature = 25°C
1.600
1 400
1.400
Relattive Lumin
nous Flux
x
1.200
1.000
0.800
0.600
0 600
0.400
0.200
0.000
0
100
200
300
400
500
600
700
800
900
1000
Forward Current [mA]
Figure 15. Typical relative luminous flux vs. forward current, thermal pad temperature = 25°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
13
Typical Relative Luminous Efficacy vs. Temperature
1.200
1.100
Normalizzed Lumin
nous Effic
cacy
1.000
0.900
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
-20
0.000
0
20
40
60
80
100
120
140
Thermal Pad Temperature [°C]
Figure 16. Relative luminous efficacy vs. thermal pad temperature, test current 700mA.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
14
Current Derating Curves
Current Derating Curves at 350mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
400
IF - Forward Current mA
350
300
250
15°C/W
200
25°C/W
150
35°C/W
100
45°C/W
50
0
0
25
50
75
100
125
150
175
TA - Ambient Temperature °C
Figure 17. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
Current Derating Curves at 700mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
800
IF - Forward Current mA
700
600
500
1 °C/W
15°C/W
400
25°C/W
300
35°C/W
200
100
0
0
25
50
75
100
125
150
175
TA - Ambient Temperature °C
Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
15
Current Derating Curves at 1000mA Forward Current Operation for
4100K Neutral White and 5650K Cool White Emitters
1200
IF - Forward
ard Current mA
1000
800
600
15°C/W
400
25°C/W
200
0
0
25
50
75
100
125
150
175
TA - Ambient Temperature °C
Figure 19. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
16
Typical Radiation Pattern
Typical Spatial Radiation Pattern for 4100K Neutral White
and 5650K Cool White Emitters
100%
90%
80%
Relative
ative Intensity
70%
60%
50%
40%
30%
20%
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement (degrees)
Figure 20. Typical representative spatial radiation pattern for 4100K neutral white and 5650K cool white lambertian.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
17
Emitter Pocket Tape Packaging
20
1000
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
50
18
Emitter Reel Packaging
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
19
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward
voltage (Vf ).
Decoding Product Bin Labeling
LUXEON Rebel ES emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of LUXEON Rebel ES emitters are labeled with a four digit alphanumeric CAT code following the format below.
ABCD
A
=
B&C =
D
=
Flux bin (P, Q, R, S etc.)
Color bin (W0, V0, U0 etc. for LXML-PWx2 series.
5W, 5X, 5Y and 5Z for LXH7-PW40 emitter)
Vf bin (P, R, S and T)
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
20
Luminous Flux Bins
Table 9 lists the standard photometric luminous flux bins for LUXEON Rebel ES emitters (tested and binned at
700mA).
Although several bins are outlined, product availability in a particular bin varies by production run and by product
performance.
Not all bins are available in all colors.
Table 9. Flux Bins
*
Bin Code
Min Photometric
Flux (lm)
Max Photometric
Flux (lm)
P
120
140
Q
140
160
R
160*
180
S
180
200
T
200
220
U
220
240
260
V
240
W
260
280
X
280
300
170 lm for LXW8-PW4
Beginning in March 2013, LUXEON Rebel ES will transition to 10 lumen flux bins as shown in the table below. This
transition may result in mixed shipments of old bin codes and new bin codes during calendar year 2013.
Table 10. Flux Bins
Bin Code
Min Photometric
Flux (lm)
Max Photometric
Flux (lm)
1
120
130
140
2
130
3
140
150
4
150
160
5
160
170
6
170
180
7
180
190
8
190
200
9
200
210
A
210
220
B
220
230
C
230
240
D
240
250
E
250
260
F
260
270
G
270
280
H
280
290
300
J
290
K
300
310
L
310
320
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
21
4100K Neutral White Bin Structure
4100K Neutral White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range
3,500K to 4,500K.
0.44
3500K
3800K
0.42
RM
4100K
SM
4500K
RN
0.40
TM
blackbody locus
SN
R0
TN
0.38
y
S0
RP
T0
SP
0.36
TP
0.34
0.32
0.33
0.35
0.37
x
0.39
0.41
0.43
Figure 21. 4100K Neutral White bin structure.
Table 11. 4100K Neutral White Bin Coordinates
Bin Code
x
y
Typical CCT (K)
Bin Code
x
y
Typical CCT (K)
TM
0.367294
0.385953
0.381106
0.364212
0.400290
0.412995
0.393747
0.382878
4300
S0
0.378264
0.392368
0.387071
0.374075
0.382458
0.390932
0.373899
0.365822
3950
0.364212
0.381106
0.378264
0.362219
0.362219
0.378264
0.374075
0.359401
0.359401
0.374075
0.370582
0.357079
0.382878
0.393747
0.382458
0.371616
0.371616
0.382458
0.365822
0.355699
0.355699
0.365822
0.351953
0.342581
4300
SP
4300
RM
4300
RN
0.374075
0.387071
0.382598
0.370582
0.402270
0.420940
0.414776
0.396279
0.396279
0.414776
0.408593
0.392368
0.365822
0.373899
0.359515
0.351953
0.422776
0.432618
0.416097
0.403508
0.403508
0.416097
0.399525
0.390932
SM
0.385953
0.402270
0.396279
0.381106
0.412995
0.422776
0.403508
0.393747
R0
0.392368
0.408593
0.402113
0.387071
0.390932
0.399525
0.382156
0.373899
3650
SN
0.381106
0.396279
0.392368
0.378264
0.393747
0.403508
0.390932
0.382458
RP
0.387071
0.402113
0.396564
0.382598
0.373899
0.382156
0.367284
0.359515
3650
TN
T0
TP
3950
3950
3950
3650
3650
Note for Table 11:
1. Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
22
5650K Cool White Bin Structure
0.41
4500K
5000K
0.39
UM
5650K
0.37
UN
VM
6300K
0.35
WN
XM
XN
0.33
y
10000K
Y0
U0
V0
W0
X0
0.31
VN
WM
7000K
blackbody locus
UP
VP
WP
WQ
XP
YA
0.29
0.27
0.25
0.25
0.27
0.29
0.31
x
0.33
0.35
0.37
0.39
Figure 22. 5650K Cool White bin structure.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
23
5650K Cool White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range
4,500K to 10,000K.
Table 12. 5650K Cool White Bin Coordinates
Bin Code
x
y
Y0
0.274238
0.303051
0.307553
0.282968
0.300667
0.332708
0.310778
0.283772
YA
0.282968
0.307553
0.311163
0.289922
0.283772
0.310778
0.293192
0.270316
XM
0.301093
0.313617
0.314792
0.303051
XN
Typical CCT (K)
Bin Code
x
y
Typical CCT (K)
WQ
0.318606
0.329393
0.329544
0.319597
0.310201
0.320211
0.310495
0.301303
6000
8000
VM
0.328636
0.348147
0.346904
0.328823
0.368952
0.385629
0.371742
0.356917
5300
0.342244
0.354992
0.344438
0.332708
6700
VN
0.328823
0.346904
0.345781
0.329006
0.356917
0.371742
0.359190
0.345092
5300
0.303051
0.314792
0.316042
0.305170
0.332708
0.344438
0.333222
0.322386
6700
V0
0.329006
0.345781
0.344443
0.329220
0.345092
0.359190
0.344232
0.331331
5300
X0
0.305170
0.316042
0.317466
0.307553
0.322386
0.333222
0.320438
0.310778
6700
VP
0.329220
0.344443
0.343352
0.329393
0.331331
0.344232
0.332034
0.320211
5300
XP
0.307553
0.317466
0.319597
0.311163
0.310778
0.320438
0.301303
0.293192
UM
0.348147
0.367294
0.364212
0.346904
0.385629
0.400290
0.382878
0.371742
4750
WM
0.313617
0.328636
0.328823
0.314792
0.354992
0.368952
0.356917
0.344438
UN
0.346904
0.364212
0.362219
0.345781
0.371742
0.382878
0.371616
0.359190
4750
WN
0.314792
0.328823
0.329006
0.316042
0.344438
0.356917
0.345092
0.333222
U0
0.345781
0.362219
0.359401
0.344443
0.359190
0.371616
0.355699
0.344232
4750
W0
0.316042
0.329006
0.329220
0.317466
0.333222
0.345092
0.331331
0.320438
6000
UP
0.344443
0.359401
0.357079
0.343352
0.344232
0.355699
0.342581
0.332034
4750
WP
0.317466
0.329220
0.329393
0.318606
0.320438
0.331331
0.320211
0.310201
6000
8000
6700
6000
6000
Note for Table 12:
1. Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates.
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
24
LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure
ANSI 1/4th quadrant bin structure for LXH7-PW40 emitter
0.41
0.40
4000K
5Y
0.39
blackbody locus
y
5X
0.38
5Z
0.37
5W
0.36
3985K
±275K
0.35
0.35
0.36
0.37
0.38
x
0.39
0.40
0.41
0.42
Figure 24. LUXEON Rebel ES ANSI 1/4th quadrant bin structure (LXH7-PW40 emitter only).
LUXEON Rebel ES emitters are tested and binned by x,y coordinates.
4 Color Bins, CCT Range 3710K to 4260K
Table 14. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates for LXH7-PW40 emitter
Nominal CCT
Bin Code
x
y
4000K
5W
0.382750
0.370300
0.367000
0.378400
0.380300
0.372600
0.357800
0.364700
4000K
5X
0.382750
0.387100
0.373600
0.370300
0.380300
0.395900
0.387400
0.372600
4000K
5Y
0.382750
0.395200
0.400600
0.387100
0.380300
0.388000
0.404400
0.395900
4000K
5Z
0.382750
0.378400
0.389800
0.395200
0.380300
0.364700
0.371600
0.388000
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
25
Forward Voltage Bins
Table 15 lists minimum and maximum Vf bin values per emitter (tested and binned at 700mA). Although several bins
are outlined, product availability in a particular bin varies by production run and by product performance.
Table 15. Vf Bins
Bin Code
Minimum Forward Voltage (V)
Maximum Forward Voltage (V)
P
2.50
2.75
R
2.75
3.00
S
3.00
3.25
T
3.25
3.50
DS061 LUXEON Rebel ES Product Datasheet 20160628 ©2016 Lumileds Holding B.V. All rights reserved.
26
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS061 LUXEON Rebel ES
Product Datasheet 20160628
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any
other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide
the most accurate information and data, the materials and services information and data are
provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the
contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.