Model BD2326L50200AHF Rev C Ultra Small Low Profile 0603 Balun 50Ω to 200Ω Balanced Description The BD2326L50200AHF is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering 802.11b+g+n. The BD2326L50200AHF is ideal for high volume manufacturing and is higher performance than traditional ceramic baluns. The BD2326L50200AHF has an unbalanced port impedance of 50Ω and a 200Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD2326L50200AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°°C) Features: • • • • • • • • • • • 2300 – 2600 MHz 0.7mm Height Profile 50 Ohm to 2 x 100 Ohm 802.11 b+g +n Compliant Low Insertion Loss Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling 2300 50 200 18 0.9 0.4 3 29 12 Operating Temperature Typ. Max Unit 2600 2 MHz Ω Ω dB dB dB Degrees dB Watts +85 ºC 1.1 0.8 9 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing TOP VIEW (Near Side) 1.59±0.10 SIDE VIEW BOTTOM VIEW (Far Side) 1 0.68±0.07 2 4x 0.29 3 Orientation Marker Denotes Pin Location 2x 0.16 6 Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters 6x 0.20 6x 0.52 0.84±0.10 4x 0.50 Pin 1 2 3 4 5 6 5 4 6x 0.25 Designation Unbalanced Port DC Bias/GND Balanced Port Balanced Port GND Not Connected Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2326L50200AHF Rev C Typical Broadband Performance: 500 MHz. to 8000 MHz. Amplitude Balance Return Loss - Input 2 0 -3 1.5 -6 -9 1 -12 0.5 [dB] -18 -21 0 -0.5 -24 -27 -1 -30 -1.5 -33 -36 5500 6000 6500 7000 7500 8000 6000 6500 7000 7500 8000 5000 4500 4000 5500 Frequency [MHz] 3500 3000 2500 2000 1500 500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 500 -2 1000 [dB] -15 Frequency [MHz] Phase Balance Insertion Loss 20 0 15 -5 10 5 deg [dB] -10 -15 0 -5 -20 -10 -25 -15 -30 Frequency [MHz] 5000 4500 4000 3500 3000 2500 2000 1500 1000 500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 500 -20 Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2326L50200AHF Rev C Typical Performance: 2200 MHz. to 2700 MHz. Amplitude Balance Return Loss - Input 0 2 -3 1.5 -6 -9 1 -12 0.5 [dB] -18 -21 0 -0.5 -24 -1 -27 -30 -1.5 -33 2550 2600 2650 2700 2550 2600 2650 2700 2500 2450 Frequency [MHz] Frequency [MHz] Phase Balance Insertion Loss 0 20 -0.3 15 -0.6 -0.9 10 -1.2 5 deg -1.5 -1.8 -2.1 0 -5 -2.4 -10 -2.7 -3 -15 -3.3 2500 2450 2400 2350 2300 2700 2650 2600 2550 2500 2450 2400 2350 2300 2250 2200 Frequency [MHz] 2250 -20 -3.6 2200 [dB] 2400 2350 2200 2700 2650 2600 2550 2500 2450 2400 2350 2300 2250 2200 2300 -2 -36 2250 [dB] -15 Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 2700 2650 2600 2550 2500 2450 2400 2350 2300 2250 -36 2200 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2326L50200AHF Rev C Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. DC Bias Footprint No Bias Footprint Circuit Pattern Circuit Pattern Dimensions are in Millimeters Mounting Footprint Plated thru holes to ground Footprint Pad (s) Footprint Pad (s) Dimensions are in Millimeters Mounting Footprint Solder Resist Solder Resist Capacitor Plated thru holes to ground 3x Transmission lines DC Bias 3x Transmission lines .04 .21 .21 .31 .31 .36 .04 PART ORIENTATION TOP DOWN PART ORIENTATION TOP DOWN .36 .14 .14 Plated thru holes to ground Visit us at www.anaren.com Plated thru holes to ground USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD2326L50200AHF Rev C Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282