HER1001G thru HER1007G Glass Passivated High Efficient Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Glass passivated chip Ultra fast switching for high efficiency Low reverse leakage current Low forward voltage drop High current capability Easily cleaned with Freon, Alcohol, Chlorothene and similar solvents Plastic material has UL flammabitily classification 94V-0 Mechanical Data Case : JEDEC DO-204AL(DO-41) molded plastic Polarity : Color band denotes cathode Weight : 0.012 ounce, 0.335 gram Mounting position : Any Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols HER 1001G HER 1002G HER 1003G HER 1004G HER 1005G HER 1006G HER 1007G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage V DC Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55oC IF(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A (Note 2) VF Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=100oC Maximum reverse recovery time IF=0.5A, IR=1.0A, Irr= 0.25A Typical junction capacitance at 4.0V, 1MHz Typical thermal resistance (Note 1) Operating junction temperature range Storage temperature range Notes: 1.0 1.3 1.7 Volts 5.0 100 IR 50 trr uA 75 nS CJ 17 RθJA RθJL 60 15 TJ -55 to +150 o C TSTG -55 to +150 o C 1. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length 2. Pulse test: 300us pulse width, 1% duty cycle 155 pF o C/W RATINGS AND CHARACTERISTIC CURVES 156