Series AM2S-Z 2 Watt | DC-DC Converter FEATURES: • • • • RoHS compliant 4 Pin SIP Package Ultra miniature package High efficiency up to 84% Models Single Output Input/Output Isolation 1000VDC Model Input Voltage (V) AM2S-0503SZ 4.5-5.5 AM2S-0505SZ 4.5-5.5 AM2S-0507SZ 4.5-5.5 AM2S-0509SZ 4.5-5.5 AM2S-0512SZ 4.5-5.5 AM2S-0515SZ 4.5-5.5 AM2S-0518SZ 4.5-5.5 AM2S-0524SZ 4.5-5.5 AM2S-1203SZ 10.8-13.2 AM2S-1205SZ 10.8-13.2 AM2S-1207SZ 10.8-13.2 AM2S-1209SZ 10.8-13.2 AM2S-1212SZ 10.8-13.2 AM2S-1215SZ 10.8-13.2 AM2S-1218SZ 10.8-13.2 AM2S-1224SZ 10.8-13.2 AM2S-2403SZ 21.6-26.4 AM2S-2405SZ 21.6-26.4 AM2S-2407SZ 21.6-26.4 AM2S-2409SZ 21.6-26.4 AM2S-2412SZ 21.6-26.4 AM2S-2415SZ 21.6-26.4 AM2S-2418SZ 21.6-26.4 AM2S-2424SZ 21.6-26.4 Input/Output Isolation 3000VDC AM2S-0503SH30Z 4.5-5.5 AM2S-0505SH30Z 4.5-5.5 AM2S-0507SH30Z 4.5-5.5 AM2S-0509SH30Z 4.5-5.5 AM2S-0512SH30Z 4.5-5.5 AM2S-0515SH30Z 4.5-5.5 AM2S-0518SH30Z 4.5-5.5 AM2S-0524SH30Z 4.5-5.5 AM2S-1203SH30Z 10.8-13.2 AM2S-1205SH30Z 10.8-13.2 AM2S-1207SH30Z 10.8-13.2 AM2S-1209SH30Z 10.8-13.2 AM2S-1212SH30Z 10.8-13.2 AM2S-1215SH30Z 10.8-13.2 AM2S-1218SH30Z 10.8-13.2 AM2S-1224SH30Z 10.8-13.2 AM2S-2403SH30Z 21.6-26.4 AM2S-2405SH30Z 21.6-26.4 AM2S-2407SH30Z 21.6-26.4 AM2S-2409SH30Z 21.6-26.4 AM2S-2412SH30Z 21.6-26.4 www.aimtec.com F 051e R11.E Output Voltage (V) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 • • • Operating temperature -40oC to +85oC Input / Output Isolation 1000 and 3000VDC Pin compatible with multiple manufacturers Output Current max (mA) 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 400 400 270 220 160 130 110 80 400 400 270 220 160 130 110 80 400 400 270 220 160 Tel: +1 514 620 2722 1 of 3 Capacitive load, max (μF) Efficiency (%) 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 71 77 77 80 82 82 82 82 72 78 80 82 84 84 84 82 74 80 80 84 84 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 71 77 77 80 82 82 82 82 72 78 80 82 84 84 84 82 74 80 80 84 84 84 84 84 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z Models Single Output (continued) Model AM2S-2415SH30Z AM2S-2418SH30Z AM2S-2424SH30Z Input Voltage (V) 21.6-26.4 21.6-26.4 21.6-26.4 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time Absolute Maximum Rating Peak Input Voltage time Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance 2 Watt | DC-DC Converter Output Voltage (V) 15 18 24 Nominal Conditions Capacitor VDC 25 ms ms ms Conditions Rated Typical 50 VDC MOhm pF Maximum ±3 Momentary (1sec) 110% Iout max ±1.2 ±10 ±20 ±0.02 150 100 At 20MHz Bandwidth Units 1000 or 3000 Typical For 1.0% of Vin 20…100% load 20…100% load 100% load Units -0.7 - 7 -0.7 - 15 -0.7 - 28 VDC > 1000 60 Conditions 84 84 84 Maximum Typical 3 sec Efficiency (%) 220 220 220 200 0-7 0-28 0-15 100 Parameters Parameters 4.5-5.5 10.8-13.2 21.6-25.4 5 Vin 12 Vin 24 Vin Voltage accuracy Short Circuit protection Over current protection Line voltage regulation (Single) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Temperature coefficient Ripple & Noise Rising time Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF 130 110 80 Capacitive load, max (μF) Typical 5 12 24 Output Specifications General Specifications Output Current max (mA) Maximum -40 to +85 -40 to +125 Free air convection 100 Units % % % % %/oC mV p-p ms Units KHz o C o C o C 95 % Plastic UL94-VO 1.8 g 0.46 x 0.29 x 0.38 inches 11.68 x 7.50 x 9.65 mm >2 000 000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R11.E Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter Safety Specifications Parameters Agency approval CE (for 1000VDC Isolated models) EN55022 (Radiated Emissions) class B EN55024 (Noise Immunity) IEC61000-4-2(ESD) IEC61000-4-3(Radiated immunity) Standards Pin Out Specifications Pin Dimensions 11.68 (0.46) 1000 and 3000VDC 1 2 3 4 -V Input +V Input -V Output +V Output PRINTED FACE 0.50 (0.02) Free Air Convection 3.05 (0.12) 2.54 (0.10) 100 Output Power (%) 10.15 (0.40) 9.65 (0.38) Derating 0.50 (0.02) 2.00 (0.08) 80 Safe Operating Area 60 7.50 (0.29) 0.30 (0.01) 7.50 (0.29) 40 0.50 (0.02) 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.E Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only