v01.0801 HMC132G7/HMC132P7 MICROWAVE CORPORATION GaAs MMIC HIGH-ISOLATION SPDT SWITCH, DC - 6 GHz Typical Applications Features The HMC132G7 and HMC132P7 are ideal for: Bandwidth: DC - 6 GHz • Military High Isolation: >40 dB • Space Non-Reflective Design • Test Equipment Functional Diagram The HMC132G7 and HMC132P7 are the packaged versions of the HMC132 MMIC SPDT switch. Both use the same 7-pin ceramic package but with modified lead configurations. The G7 suffix designates package leads configured for surface mount while the P7 suffix designates package leads configured for microstrip insertion. The device is a fast, broadband SPDT switch featuring high (> 40 dB) isolation over the entire band. The switch is non-reflective at both the RF1 and RF2 ports. SWITCHES - SMT 7 Electrical Specifications, TA = +25° C, With 0/-5V control, 50 Ohm System Parameter Frequency Min. Typ. Max. Units 1.5 2.2 1.9 2.6 dB dB Inser tion Loss DC - 3 GHz DC - 6 GHz Isolation DC - 3 GHz DC - 6 GHz 45 35 50 40 dB dB Return Loss (on state) DC - 3 GHz DC - 6 GHz 14 5 18 8 dB dB Input Power for 0.1 dB Compression 0.5 - 6 GHz +20 +25 dBm Input Power for 1dB Compression 0.5 - 6 GHz +22 +27 dBm Input Third Order Intercept 0.5 - 6 GHz +38 +42 dBm Switching Characteristics DC - 6 GHz 3 6 ns ns tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 7 - 14 General Description For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC132G7/HMC132P7 v01.0801 MICROWAVE CORPORATION GaAs MMIC HIGH-ISOLATION SPDT SWITCH, DC - 6 GHz Insertion Loss Isolation 0 0 -10 ISOLATION (dB) -2 -3 -4 -20 -30 -40 -50 -60 -70 -5 1 2 3 4 5 6 0 7 1 2 FREQUENCY (GHz) 3 4 5 FREQUENCY (GHz) 6 7 Return Loss 7 0 -10 -20 -30 0 1 2 3 4 5 6 7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] SWITCHES - SMT 0 RETURN LOSS (dB) INSERTION LOSS (dB) -1 7 - 15 HMC132G7/HMC132P7 v01.0801 MICROWAVE CORPORATION GaAs MMIC HIGH-ISOLATION SPDT SWITCH, DC - 6 GHz Truth Table Control Voltages Control Input Single Path State State Bias Condition A B RF to RF1 RF to RF2 Low 0 to -0.2V @ 20uA Max. HIGH LOW ON OFF High -5V @ 200uA Typ to -7V @ 600uA Max LOW HIGH OFF ON Do not “HOT” switch power levels > +15 dBm (VCTL = 0/-5 Vdc). Suggested Driver Circuit for HMC132G7/P7 SWITCHES - SMT 7 7 - 16 Vz=5.1V Izt=50uA COMPENSATED DEVICES CD4689 TTL OR CMOS A GaAs SWITCH CONTROL VCC VCC GND GND 10K B 74HCT04 (TTL) 74HC04 (CMOS) -5 VDC Simple driver using inexpensive standard logic ICs provides fast switching using minimum DC current. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC132G7/HMC132P7 v01.0801 MICROWAVE CORPORATION GaAs MMIC HIGH-ISOLATION SPDT SWITCH, DC - 6 GHz Absolute Maximum Ratings Control Voltage Range +0.5 to -7.5 Vdc Storage Temperature -65 to +150 deg C Operating Temperature -55 to +125 deg C Outline: HMC132G7 0.320 +/- 0.012 0.260 0.130 0.005 RFCOM +/- 0.001 7 PLCS 0.050 +/- 0.020 7 PLCS 7 0.276 +/- 0.012 RF1 RF2 0.010 0.085 +/- 0.002 7 PLCS CASE BOTTOM IS GROUND GND A B GND 0.000/0.010 0.062 0.045 TYP 0.135 TYP 0.065 MAX Outline: HMC132P7 0.260 0.025 0.005 0.130 7 PLCS +/- 0.001 7 PLCS 1. MATERIAL A. PACKAGE BODY: WHITE ALUMINA (92%) B. LEADS - PACKAGE COVER: KOVAR (tm) C. CONDUCTOR TRACES - THICKFILM TUNGSTEN 2. PLATING (LEADS): ELECTROLYTIC GOLD 50 MICROINCHES MINIMUM OVER ELECTOLYTIC NICKEL 50 MICROINCHES MINIMUM. 3. ALL UNLABELED PINS ARE GROUND. 4. ALL DIMENSIONS ARE IN INCHES. RFCOM RF1 0.215 SWITCHES - SMT 0.215 RF2 0.010 0.085 +/- 0.002 7 PLCS CASE BOTTOM IS GROUND 0.210 +/- 0.020 GND A 0.062 B GND TYP 7 PL 0.065 MAX 0.045 TYP 0.135 TYP For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 7 - 17