Datatronic DR358-3-123 Shielded smd inductor dr358-3 sery Datasheet

September 23, 2009
SHIELDED SMD INDUCTOR DR358-3 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 4.1µH to 100.0µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR358-3-412
DR358-3-542
DR358-3-622
DR358-3-892
DR358-3-103
DR358-3-123
DR358-3-153
DR358-3-183
DR358-3-223
DR358-3-273
DR358-3-333
DR358-3-393
DR358-3-473
DR358-3-563
DR358-3-683
DR358-3-823
DR358-3-104
Inductance
(H)  30%
4.1
5.4
6.2
8.9
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
DCR
() Max.
0.057
0.076
0.096
0.116
0.124
0.153
0.196
0.210
0.290
0.330
0.386
0.520
0.595
0.665
0.840
0.978
1.200
I rated
(A) Max.
1.95
1.60
1.40
1.25
1.20
1.10
0.97
0.85
0.80
0.75
0.65
0.57
0.54
0.50
0.43
0.41
0.36
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irated for an approximate 40C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 2000 pcs/reel
7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-3 becomes 42-358-3)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.