E91127A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 1.2A Features • • • • • • Glass passivated Bridge Rectifiers Ideal for automated placement Very low profile - max height 1.2 mm High surge current capability Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds Mechanical Data case: E91 • Case:E91,Molding compound meets UL 94V-0 flammability rating • Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22B102 Typical Applications General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter, Printer,Audio equipment,and Home Applications application Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol E91127A Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average output rectified current VRRM VRMS VDC Io(AV) 1000 V 700 1000 1.2 V V A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 45 A I2t TJ, TSTG 8 A2s 150 °C Rating for fusing (t≤8.3ms) Operating junction and storage temperature range Electrical Characteristics Parameter Test Conditions Maximum instantaneous forward voltage IF=0.6A IF=1.2A (TA = 25 °C unless otherwise noted) Symbol 0.95 VF TA=25℃ Maximum DC reverse current at rated DC blocking TA=125℃ voltage IR Typical junction capacitance 4.0 V, 1 MHz CJ www.goodark.com E91127A 1.0 Unit Volts 5.0 µA 50 12 1/4 pF 2015.12-Rev.A E91127A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 1.2A Thermal Characteristics Parameter Test Conditions Typical thermal resistance juntion to ambient (Ta=25℃ unless otherwixe noted) 1) 1) juntion to case 2) juntion to ambient 2) juntion to case Symbol E91127A RθJA 45 RθJC 12.6 RθJA RθJC 29.8 Unit ℃/W 8.4 Note:1), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with recommended copper pads 2), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with 13*13mm copper pads Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Pulse width=0.3ms Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com Figure 4. Typical Reverse Characteristics 2/4 2015.12-Rev.A E91127A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 1.2A Package Outline Dimensions Mounting Pad layout,unit:mm (Unit:mm) Dim A C D HE E E1 L1 L2 Min 1.10 0.20 8.3 10.0 9.1 Nom. 1.17 0.25 8.4 10.2 9.30 5.28 REF Max 1.20 0.35 8.6 10.4 9.5 1.4 1.0 1.60 1.2 1.80 1.4 www.goodark.com Dim L3 L4 L5 P1 P2 P3 P4 3/4 Min 5.7 0.6 1.4 Nom. 5.9 0.80 1.6 3.0 REF 7.4 REF 3.1 REF 3.68 REF Max 6.1 1 1.8 2015.12-Rev.A E91127A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 1.2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.12-Rev.A