THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST - - P LTR DESCRIPTION A B REVISED PER ECR-14-007825 ECO-15-015144: ADD UL. SAFETY ORGANIZATIONS APVD EC EC RS EC 30MAY2014 23OCT2015 RELIABILITY SPECIFICATIONS STORAGE TEMPERATURE: HUMIDITY: THIS FILTER HAS BEEN FORMALLY RECOGNIZED, CERTIFIED OR APPROVED BY THE LISTED AGENCY. THEREFORE, ALL TEST/REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF THE FOLLOWING AGENCY STANDARDS HAVE BEEN MET: UL -40 $ C TO +85 $ C 21 DAYS @ 40 $ C AND 95% RH TEST SPECIFICATIONS INDUCTANCE,NOMINAL: 64.1 µH CAPACITANCE @ 1 kHz, 0.25 VAC MAX., 25 $ C # 1 $ C: LINE TO GROUND,NOMINAL: 2.62 µF LINE TO LINE,NOMINAL: 12.3 µF OPERATING SPECIFICATIONS - DWN DATE LINE CURRENT/VOLTAGE: 250 A, 520 VAC LINE FREQUENCY: 50-60 Hz NOMINAL LEAKAGE CURRENT: MAXIMUM LEAKAGE CURRENT: 6 mA 222mA OPERATING AMBIENT TEMPERATURE RANGE @ RATED CURRENT, I : DISCHARGE RESISTOR L/G AND L/L I.R. 666k ^ / 666k ^ IR (NO DISCHARGE RESISTOR) 20°C, 50% RH AND 100VDC, MIN: 6000 M ^ @ 277V, 50HZ RECOMMENDED RECEIVING INSPECTION HIPOT LINE TO GROUND FOR 1 MINUTE: 2200 VDC LINE TO LINE FOR 1 MINUTE: 2160 VDC -10 $ C TO +50 $ C C O RELEASED FOR PUBLICATION IN AN AMBIENT, T , HIGHER THAN 50°C, THE MAXIMUM OPERATING CURRENT, I , IS AS FOLLOWS: I I = I 100-T R Q FILTER APPROVAL: THE BEST WAY TO SELECT AND QUALIFY A FILTER IS FOR YOUR ENGINEERING TO TEST THE UNIT IN YOUR EQUIPMENT. 50 35 120 90 90 12 ALL RIGHTS RESERVED. LOAD 205 5 LINE 160 40 35 45 230 250 9 10 * 20 115 32 * DO NOT LOOSEN INNER GROUND NUTS. TORQUE OUTER GROUND NUTS TO: 12-14 NM [110-120 IN-LB] - TYPICAL INSERTION LOSS COPYRIGHT COMMON MODE 50/50 C THIS DRAWING IS UNPUBLISHED. BY - 25 DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: 2.0 1 0.5 0.2 0.0001 16DEC2013 CHK 16DEC2013 APVD 16DEC2013 RS mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN EC EC PRODUCT SPEC 8-1609148-2 - - Customer Drawing 0.01 0.05 0.15 0.5 1.0 3.0 5.0 CM 12 23 66 77 63 79 DM 31 45 64 81 69 57 FINISH 10 30 80 53 29 51 44 31 TE Connectivity NAME SIZE 6.4 kg MHz - APPLICATION SPEC WEIGHT 1469-35 (3/11) MATERIAL ^ ; DIFFERENTIAL MODE 100/100 ^ CAGE CODE A4 00779 250APH12L 3-PHASE DELTA FILTER DRAWING NO 8-1609148-2 SCALE 2:15 SHEET RESTRICTED TO 1 OF - 1 REV B