Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com NHG RELAYS JQ104E 40 35 36 Features Small size and light weight. Heavy contact load (100A). Contact arrangement Form A and C available. Suitable for automobile and lamp accessories application. PC board mounting and direct insert mounting available. Ordering Information 2 3 4 DC12V N D 6 7 8 5 5 6 7 8 1Part number NVF7 2Contact arrangement A:1A 3Enclosure S: Sealed type Z: Dust cover 4Contact current 100A 5 0.197 1.12 0.044 Terminals b: PCB type a: plug in type Coil rated voltage(V) DC:6,12,24 Contact material N:AgNi NIL: AgSnO2 Coil transient suppression: D: with diode.; 2D:with two diodes.;. R: with resistance.; DR: with diode and resistance; NIL: standard 50 1.969 39.5 1.555 60.5max. 1 100 b ?7 Z 0.276 A 77.4max. JQ104E Contact Data Contact Arrangement Contact Material 1A SPSTNO AgSnO 2 , AgNi Contact Rating (resistive) 100A/14VDC 400W 75VDC Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life 44.4max. Max. Switching Current:100A 30m Electrical Mechanical Item 3.12 of IEC255-7 10 5 10 7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 Coil Parameter Dash numbers Coil voltage VDC Rated 012-10000 12 Coil resistance 10% Pick up voltage VDC(max) (55%of rated voltage) 80 6.6 Release voltage VDC(min) (10% of rated voltage) Coil power consumption W Operate Time ms Release Time ms Max. 14.5 1.2 10 7 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 2 JQ104E Operation condition Insulation Resistance1) 100M min (at 500VDC) Item 7 of IEC255-5 1) Features Dielectric Strength Between contacts Between contact and coil 50Hz 1000V 50Hz 2000V Item 6 of IEC255-5 Item 6 of IEC255-5 Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 147m/s2 11ms 10~40Hz double amplitude 1.5mm 8N 4N PC type 235 2 3 0.5s -40~105 85% (at 40 ) 46g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua2 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Note: 1). When testing, coil terminals should be connected, If coil transient suppression is installed in relay . Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions Ordering Information mm /inch 5 0.197 1.12 0.630max. 0.044 ?7 1Part number NVF7 2Contact arrangement A:1A 3Enclosure S: Sealed type Z: Dust cover 4Contact current 100A 39.5 60.5max. 3.047max. 77.4max. 3.433max. 87.2max. 12.8 0.504 3 10 40 Max. 1.575max. 2.382max. 1.555 0.393 1.118 100A/14VDC 50 1.969 1.375 35 Contact Rating (resistive) 17 1A SPSTNO AgSnO 2 , AgNi 0.669 Contact Data Contact Arrangement Contact Material 0.276 36 Max. 44.4max. 1.748max. Cover Dimensions Electrical Mechanical 1.575max. 0.791 0.031 0.268 0.024 Coil voltage VDC 1.375max. Dash numbers 0.346 0.201 0.118 Mounting (Bottom view) Wiring diagram (Bottom view) NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. 157 Ningbo Huaguan Relay Corporation LTD.