CLV1080A-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Basestations • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1020 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -107 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Max Units 1150 MHz dBc/Hz -13 dBc 4.75 Vdc MHz/V 40 Tuning Sensitivity (avg.) 5 dBm 150 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 2 MHz 75 °C Max Units Power Output 0 Load Impedance 2.5 50 Input Capacitance Operating Temperature Range -20 Package Style Power Supply Requirements MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 26 Vdc 31 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1080A-LF Rev B2 Tuning Curve, typ. 1190 FREQUENCY (MHz) 1170 1150 1130 1110 75 °C 25 °C 1090 1070 1050 -20 °C 1030 1010 990 970 950 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 966 993 1014 1036 1057 1078 1099 1121 1143 1166 FREQUENCY (MHz) 75 °C 25 °C -20 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B