AUTOMOTIVE LUXEON F ES Cool White Industry-leading solutions for light guide DRL, and signature lamps LUXEON F ES Cool White LEDs are the only automotive LEDs that deliver design flexibility and advanced functionality. These products, with their miniaturized form factor, are designed to support daytime running lights, front fog and low and high beam applications. The Lumileds automotive binning structure meets both SAE and ECE color specifications and is hot binned at 85°C, consistent with actual automotive operational environments. LUXEON F ES Cool White provides an industry-leading solution for your front automotive lights applications. All LUXEON F LEDs are IEC-60810 qualified. Features and Benefits Primary ApplicationS Higher drive current capability for increased flux performance Daytime Running Lights Low thermal resistance for better hot lumen performance Front Fog Standard packaging for low cost and ease of manufacturability Headlight Hot binned at 85°C monopulse (MP) to match closer to operating conditions IEC/PAS 62707-1 White LED RoHS COMPLIANT DS187 LUXEON F ES Cool White Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Forward Current and Voltage Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Operating Limits Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Permissible Pulse Handling Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Designing with LUXEON F ES Cool White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Color Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON F ES Cool White LEDs are tested and binned using a 20ms monopulse (MP) at 700mA drive current, case temperature, Tc, of 85°C. Tj = LED junction temperature Tc = Tsolder = Case Temperature Tsensor = Temperature at thermo sensor location (not solder location) Figure 1. Example of case temperature location on sample board for LUXEON F ES Cool White. Part Number Nomenclature Part numbers for LUXEON F ES Cool White follow the convention below: L F X H – A B C – E F G H Where: L – designates LUXEON F – designates LUXEON F product family X H – designates hot binning A – designates color variant (C=White) B – designates die size (2=2mm2) C – designates binning current (B=700mA) E – designates future product offerings F G H – designates minimum luminous flux Therefore, the following part number is used for a LUXEON F ES Cool White with a minimum luminous flux of 220 lumens: L F X H – C 2 B – 0 2 2 0 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON F ES Cool White is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product selection for LUXEON F ES Cool White at 20ms MP test current, Tc=85°C. MINIMUM LUMINOUS FLUX [1] (lm) TEST CURRENT (mA) Part Number 220 700 LFXH-C2B-0220 240 700 LFXH-C2B-0240 260 700 LFXH-C2B-0260 Notes for Table 1: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. Optical Characteristics Table 2. Typical optical characteristics for LUXEON F ES Cool White at 20ms MP test current, Tc=85°C. Part Number LFXH-C2B-0xxx CORRELATED COLOR TEMPERATURE MINIMUM MAXIMUM Total Included Angle [1] θ0.90V 5500K 6680K 140° Viewing Angle [2] 2θ1/2 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical characteristics for LUXEON F ES Cool White at 20ms MP test current, Tc=85°C. Part Number LFXH-C2B-0xxx Forward Voltage [1] (Vf) Minimum MAXIMUM 2.55 3.27 Typical Thermal Resistance— Junction to CASE (°C/W) DYNAMIC RESISTANCE [2] (Ω) RD Temperature Coefficient of Forward Voltage [3] (mV/°C) ΔVf / ΔTj TYPICAL MAXIMUM TYPICAL MAXIMUM 0.3 -2.1 2.4 2.7 3.4 3.8 Rθj-c el [4] Rθj-c real [5] Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs (see Figure 4a. Typical forward current vs. forward voltage). 3. Measured between Tc=80°C and Tc=90°C at binning current. 4. Rθj-c el: Electrical thermal resistance (junction to case). 5. Rθj-c real: Real thermal resistance (junction to case) with wall plug efficiency included. Reference JESD51-51, JESD51-14, 4.1.3. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 3 Absolute Ratings Table 4. Absolute ratings for LUXEON F ES Cool White. Parameter Performance Minimum DC Forward Current 50mA Maximum DC Forward Current Maximum Junction Temperature 1000mA 150°C [1] Operating Case Temperature at Test Current [1] -40°C to 120°C Operating Case Temperature at Maximum Current [1] -40°C to 120°C LED Storage Temperature -40°C to 130°C Maximum Soldering Temperature 260°C Allowable Reflow Cycles 3 ESD Sensitivity [2] ±8kV HBM, ±400V MM, ±2kV CDM Reverse Voltage (Vreverse) LUXEON F LEDs are not designed to be driven in reverse bias Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. LUXEON F LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). JEDEC Moisture Sensitivity Table 5. Moisture sensitivity levels for LUXEON F ES Cool White. level 1 Floor Life Standard Soak Requirement TIme Conditions Time Conditions Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 2. Typical normalized power vs. wavelength for LUXEON F ES Cool White at 20ms MP, 700mA, Tc=85ºC. Light Output Characteristics Figure 3a. Typical normalized light output vs. case temperature for LUXEON F ES Cool White at 20ms MP, 700mA. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 5 Figure 3b. Typical normalized light output vs. forward current for LUXEON F ES Cool White at TC=85°C. Forward Current and Voltage Characteristics Figure 4a. Typical forward current vs. forward voltage for LUXEON F ES Cool White at TC=85°C. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 6 Figure 4b. Typical forward voltage shift vs. case temperature for LUXEON F ES Cool White. Color Shift Characteristics Figure 5a. Typical color shift in CIE 1931 x and y coordinates for LUXEON F ES Cool White at 20ms MP, 700mA. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 7 Figure 5b. Typical color shift in CIE 1931 x and y coordinates over angle for LUXEON F ES Cool White at 20ms MP, 700mA. Radiation Pattern Characteristics Figure 6. Typical radiation pattern for LUXEON F ES Cool White at 20ms MP, 700mA, TC=85°C. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 8 Operating Limits Characteristics Figure 7. Maximum forward current vs. case temperature for LUXEON F ES Cool White. Permissible Pulse Handling Characteristics Figure 8. Permissible pulse handling capability for LUXEON F ES Cool White, Tc=120°C. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 9 Product Bin and Labeling Definitions Designing with LUXEON F ES Cool White Flux bins supportable for car programs depend on product color, program start and end of production date. Flux roadmaps by year and product color are maintained and available from the sales representative. Please contact your local sales representative to request the flux bin range with best supportability for program timing. Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage. LUXEON F ES Cool White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A – designates luminous flux bin (example: T=220 to 240 lumens) BC – designates color bin (example: 1A, 1B, 1C, 1D) D – designates forward voltage bin (example: B=2.55V to 2.79V) Therefore, a LUXEON F ES Cool White with a lumen range of 220 to 240, color bin of 1D, and a forward voltage range of 2.55V to 2.79V has the following CAT code: T 1 D B Luminous Flux Bins Table 6 lists the standard luminous flux bins for LUXEON F emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 6. Luminous flux bin definitions for LUXEON F ES Cool White at 20ms MP test current, Tc=85°C. Bin Luminous Flux [1] (lm) Minimum Maximum T 220 240 V 240 260 W 260 280 Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 10 Color Codes 0.38 0.37 0.36 y 0.35 0.34 0.33 0.32 0.31 0.3 0.3 0.31 0.32 0.33 x 0.34 0.35 0.36 Figure 9. Color bin structure in CIE 1931 color space for LUXEON F ES Cool White. Notes for Figure 9: 1. Lumileds supports the following bins for LUXEON F ES Cool White: H2 and HC. 2. LUXEON F historical large color notations. Color bins must be ordered by fine bin designators, shown below. H1 = 1A, 1B, 1C, 1D H2 = 2A, 2B, 2C, 2D H3 = 3A, 3B, 3C, 3D H4 = 4A, 4B, 4C, 4D HC = 1D, 2C, 3B, 4A DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 11 Color Bin Definitions Table 7. Color bin definitions for LUXEON F ES Cool White. Bin 2B 2D 4B 4D 2A 2C 4A 4C 6-Digit IEC Code Typical CCT Bin x y x y 0.3120 0.3139 0.3120 0.3306 0.3185 0.3203 0.3169 0.3353 0.3192 0.3131 0.3177 0.3277 0.3131 0.3070 0.3131 0.3232 0.3185 0.3203 0.3169 0.3353 0.3253 0.3266 0.3256 0.3191 ebvG33 ebyG33 6460K 6050K 1B 1D 0.3246 0.3424 0.3249 0.3344 0.3192 0.3131 0.3177 0.3277 0.3253 0.3266 0.3246 0.3424 0.3323 0.3329 0.3325 0.3493 0.3323 0.3251 0.3324 0.3410 0.3256 0.3191 0.3249 0.3344 0.3323 0.3329 0.3325 0.3493 0.3396 0.3392 0.3406 0.3562 0.3392 0.3310 0.3401 0.3476 ecbG33 eceG33 5680K 5350K 3B 3D 0.3323 0.3251 0.3324 0.3410 0.3109 0.3211 0.3109 0.3382 0.3177 0.3277 0.3185 0.3203 0.3120 0.3139 0.3177 0.3277 0.3161 0.3432 0.3249 0.3344 0.3242 0.3506 0.3253 0.3266 0.3246 0.3424 0.3185 0.3203 0.3169 0.3353 0.3249 0.3344 0.3242 0.3506 0.3324 0.3410 0.3323 0.3329 ebvD33 ebyD33 ecbD33 6460K 6050K 5680K 1A 1C 3A 0.3161 0.3432 0.3169 0.3353 0.3120 0.3306 0.3325 0.3579 0.3325 0.3493 0.3253 0.3266 0.3246 0.3424 0.3324 0.3410 0.3325 0.3579 0.3401 0.3476 0.3412 0.3652 0.3396 0.3392 0.3406 0.3562 0.3323 0.3329 0.3325 0.3493 eceD33 5350K 3C 6-Digit IEC Code Typical CCT fbwA23 6390K fbyA33 6050K fcbA33 5680K fceA33 5350K fbwD23 6390K fbyD33 6050K fcbD33 5680K fceD33 5350K Notes for Table 7: 1. Lumileds maintains a tester tolerance of ± 0.005 on x and y color coordinates. 2. CIE 1931 x and y coordinate frame. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 12 Forward Voltage Bins Table 8. Forward voltage bin definitions for LUXEON F ES Cool White. Forward Voltage [1] (Vf) Bin Minimum Maximum B 2.55 2.79 C 2.79 3.03 D 3.03 3.27 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Although several bins are outlined, product availability in a particular bin varies by production run and product performance. Mechanical Dimensions 1.65 ANGULARITY TOLERANCE ±2° 1.90±0.10 0.95 1.4 0.60±0.10 0.125 TYP. 0.85 0±0.05 CENTER OF THERMAL PAD TO CENTER OF DIE AREA B CENTER OF THERMAL PAD 0.575±0.10 CENTER OF THERMAL PAD TO TOP EDGE 0.90 1.4 2.05 2.30±0.10 0.275±0.05 CENTER OF THERMAL PAD TO CENTER OF DIE AREA 0.90 DIE AREA CENTER OF DIE B 0.68±0.10 TVS STANDARD TOLERANCES (UNLESS OTHERWISE SPECIFIED) LINEAR: ANODE 0.95±0.10 CENTER OF THERMAL PAD TO SIDE EDGE 0.70 0.25 CATHODE ANGULAR: Figure 10. Mechanical dimensions for LUXEON F ES Cool White. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 13 Packaging Information Pocket Tape Dimensions B A A B Ao: Bo: Ko: K1: Pitch: 2.15±0.05 2.55±0.05 0.95±0.05 4.00±0.10 Width: 8.00+0.30 -0.10 Figure 11. Pocket Tape dimensions for LUXEON F ES Cool White. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. 3. Ao is the width of pocket and Ko is the depth of pocket. Bo is the height of pocket. Reel Dimensions Figure 12. Reel dimensions for LUXEON F ES Cool White. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 14 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS187 LUXEON F ES Cool White Product Datasheet 20171108 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.