Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company NPN SILICON PLANAR EPITAXIAL TRANSISTOR CD9018 TO-92 Plastic Package E BC AM/FM Amplifier, Local Oscillator of FM/VHF Tuner ABSOLUTE MAXIMUM RATINGS DESCRIPTION Collector Emitter Voltage SYMBOL VCEO VALUE 15 UNITS V Collector Base Voltage VCBO 30 V Emitter Base Voltage VEBO 5 V Collector Current Power Dissipation @ Ta=25ºC IC 30 mA PD 400 mW Junction Temperature Tj 125 ºC Storage Temperature Range Tstg - 55 to +125 ºC ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION V IC=3mA, IB=0 Collector Emitter Voltage CEO VCBO IC=10µA, IE=0 Collector Base Voltage VEBO IE=10µA, IC=0 Emitter Base Voltage MIN 15 TYP MAX UNITS V 30 V 5 V Collector Cut Off Current ICBO VCB=15V, IE = 0 50 nA Emitter Cut Off Current IEBO VEB=3V, IC = 0 100 nA DC Current Gain hFE Collector Emitter Saturation Voltage DYNAMIC CHARACTERISTICS DESCRIPTION Output Capacitance Transition Frequency Noise Figure hFE Rank Classfication Rank D hFE 29 - 44 VCE (sat) VCE=5V, IC=1mA TEST CONDITION Cob VCB=10V, IE=0,f=1MHz NF E 40 - 59 273 IC=10mA, IB=1mA SYMBOL fT 29 VCE=10V, IC=5mA, f=100MHz VCE=10V, IC=1mA, f=60MHz F 54 - 80 G 72 - 108 MIN TYP 0.5 V MAX UNITS 1.7 pF 600 H 97- 146 MHz 5.0 dB I 132 - 198 J 182 - 273 CD9018Rev_3 170403E Continental Device India Limited Data Sheet Page 1 of 4 CD9018 TO-92 Plastic Package TO-92 Plastic Package A Uncontrolled DIM MIN. MAX. 5.33 4.32 A B 5.20 4.45 4.19 3.18 C D 0.55 0.41 0.50 0.35 E F 5 DEG 1.40 G 1.14 H 1.40 1.20 12.70 K — L 1.982 2.082 1.20 1.03 M All dimensions are in mm 1 D K 2 3 E Beyond 'L' Solderability Ensured L Dimension With 'L' B D SEC AA A A G F C 3 2 1 H M F Mold Parting Line PIN CONFIGURATION 1. COLLECTOR 2. BASE 3. EMITTER 3 2 1 The TO-92 Package, Tape and Ammo Pack Drawings are correct as on the date of issue/revision of this Data Sheet. The currently valid dimensions and information, may please be confirmed from the TO-92 Drawing in the Packages and Packing Section of the Product Catalogue. Packing Details PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-92 Bulk 1K/polybag 200 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 23 kgs TO-92 T&A 2K/ammo box 645 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 12.5 kgs CD9018Rev_3 170403E Continental Device India Limited Data Sheet Page 2 of 4 CD9018 TO-92 Plastic Package TO-92 Tape and Ammo Pack Tape Mechanical Data h (p) P T h h1 Ammo Pack Style Adhesive Tape on Top Side h1 A1 Flat side A H3 H2 Label C1 H1 Ho Wo L Carrier Strip 186 (7.3") W2 C2 D FEE W1 W F1 F2 Do 332 F t1 (1. 43 7") P2 t Po ") (1 3 Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions are in mm ITEM BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT * 1 FEED HOLE PITCH * 2 FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS * 3 COMPONENT ALIGNMENT SIDE VIEW * 4 COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER * 5 TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE SPECIFICATION SYMBOL A1 A T P Po MIN. NOM. MAX. 4.0 4.8 3.9 TOL . NOTES 4.8 5.2 4.2 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 12.7 12.7 ± 1.0 ± 0.3 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. P2 6.35 ± 0.4 F 5.08 + 0.6 - 0.2 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. h h1 W Wo W1 0 0 18 6 9 W2 Ho H1 L Do t F1, F2 0.5 16 H2 H3 | C1 - C2 | (p) 1.0 1.3 ± 0.5 ± 0.2 + 0.7 - 0.5 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. ± 0.2 ± 0.5 6. Splices should not interfere with the sprocket feed holes. ± 0.2 REMARKS 23.25 11.0 4 1.2 2.54 0.45 6N 1.45 3.0 0.22 + 0.4 - 0.1 * 1 Cumulative pitch error 1.0 mm/20 pitch * 2 To be measured at bottom of clinch * 3 At top of body * 4 At top of body * 5 t1 0.3 – 0.6 mm CD9018Rev_3 170403E Continental Device India Limited Data Sheet Page 3 of 4 Notes CD9018 TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 [email protected] www.cdilsemi.com CD9018Rev_3 170403E Continental Device India Limited Data Sheet Page 4 of 4