50-900 MHz High Dynamic Range Amplifier CMM6003-SC August 2007 - Rev 07-Aug-07 Features 50 to 900 MHz Frequency Range +41 dBm Output IP3 -71 dBc CTB -48 dBc CSO 1.6 dB Noise Figure (@ 450 MHz) 17 dB Gain 22 dBm P1dB RoHS Compliant SOT-89 SMT Package Single Power Supply +3V to +5V Voltage Rail MTBF > 100 Years Ideal for CATV Applications Absolute Maximum Ratings Description Supply Voltage RF Input Power* Storage Temperature Junction Temperature Operating Temperature Thermal Resistance The CMM6003-SC is a high dynamic range amplifier suitable for cable TV applications between 50 and 900 MHz. The combination of gain flatness, bandwidth, low noise figure and high third order intercept point make it ideal for cable modem, CATV distribution and laser diode driver applications. The CMM6003-SC can operate directly from 5V or 3.3V supply voltage in 75 ohm systems. The device is manufactured using a highly reliable GaAs MESFET technology with an MTBF of over 100 years at a mounting temperature of +85ºC. All devices are 100% RF (at 800Mhz) and DC tested and they come in an RoHs compliant SOT-89 package which provides excellent electrical stability and low thermal resistance. F requency R ange Gain Input Return Loss O utput I P3 Noise Figure Noise Figure Output P1dB Operating Current Range Supply Voltage Externally matched Externally matched -55ºC to 150ºC 150ºC -40ºC to +85ºC 59º C/W Typical Parameters Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture. Condition +10 dBm Operation of this device above any of these parameters may cause damage. *Operation with more than 10 dBm of input power may cause 2 dB degradation in OIP3 performance. Electrical Characteristics Parameter +6.0 V Min Typ Max Units 50 15 800 17 -11 +41 3.3 1.9 22 150 900 18 MH z dB dB dB m dB dB dBm mA V @ 50 MHz @ 800 MHz 120 180 5. 0 Notes: 1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz. Parameter Typical Units Frequency Range Gain Input Return Loss Output Return Loss Output P1dB Output IP3 100 17.5 -12 -16 23 40 450 17.2 -12 -16 23.6 39 900 16.3 -11 -13 23.8 37 MHz dB dB dB dBm dBm Output IP2 Noise Figure CTB CSO Xmod 52 3.5 -72 -48 -65 52 1.6 52 2 dBm dB dBc dBc dBc Supply Voltage Current 5 150 5 150 5 150 V mA Notes: 1. Typical values reflect performance in recommended application circuit. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 50-900 MHz High Dynamic Range Amplifier CMM6003-SC August 2007 - Rev 07-Aug-07 Application Circuit: (75 ) Frequency MHz 100 450 870 Gain dB 17.5 17.2 16.3 Input Return Loss dB -12 -12 -11 Output Return Loss dB -16 -16 -13 Output P1dB dBm 23 23.6 23.8 Output IP3 dBm 40 39 37 Output IP2 dBm 52 52 52 1.6 2 dB 3.5 CTB dBc -72 CSO dBc -48 Xmod dBc -65 Supply Voltage V Current mA Ref Designator C1,C2,C3 L1 L2 5 5 5 150 150 150 Value Size 1000 pF 0603 12 nH 0603 270 nH 0603 CMM6003-SC: 75 Ohm Board, Gain CMM6003-SC: 75 Ohm Board, P1dB 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 17.5 17 16.5 S#1 S#2 Gain (dB) OP1dB (dBm) Noise Figure 16 S#1 S#2 15.5 15 14.5 14 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.1 1 0.2 0.3 0.4 CMM6003-SC: 75 Ohm Board, OIP3 50 48 46 44 42 40 38 36 34 32 30 28 26 24 22 20 0.5 0.6 0.7 0.8 0.9 1 Frequency (GHz) CMM6003-SC: 75 Ohm Board, OIP2 55 50 45 40 S#1 S#2 OIP2 (dBm) OIP3 (dBm) Frequency (GHz) 35 30 S#1 25 S#2 20 15 10 5 0 0.1 0.2 0.3 0.4 0.5 0.6 Frequency (GHz) 0.7 0.8 0.9 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 50-900 MHz High Dynamic Range Amplifier CMM6003-SC August 2007 - Rev 07-Aug-07 Application Circuit: (50 ) Parameter Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Output P1dB Noise Figure Typical 450 17.2 -12.0 -16 +396 23.6 1.6 800 16.5 -11.5 -14 +41 23.7 1.9 Units 870 16.25 -10.5 -13 +41 23.8 2.0 MHz dB dB dB dBm dBm dB Notes: 1. Typical values reflect performance in recommended application circuit. RF IN CMM6003-SC SOT-89 T = 500 mil T = 70 mil T = 125 mil RF OUT T = 500 mil uuuu uuuu L1 6.8 nH L2 390 nH C2 100 pF Vcc 5V C1 0.1 µF INPUT MATCHING NETWORK Ref Designator C1 C2 L1 L2 Value Description 0.1 F VITR 0.1 F 25V CER CAP 0603 X7R 10% 100 pF 0603CG101J9B20 T/R 6.8 nH TOKO LL 1608-F6N8J 390 nH Coilcraft 0805CS-391XJBC Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Size 0603 0603 0603 0603 Page 3 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 50-900 MHz High Dynamic Range Amplifier CMM6003-SC August 2007 - Rev 07-Aug-07 S-Parameters vs. Frequency Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 50-900 MHz High Dynamic Range Amplifier CMM6003-SC August 2007 - Rev 07-Aug-07 Physical Dimensions 4.50 [0.177] 1.55 [0.061] 0.71 [0.028] 1.73 [0.068] 0.38 [0.015] 1.70 [0.067] 4 1 0.46 [0.18] 3X 3.48 [0.137] XXXXXXX XXXXXX ZYYWW 0.41 [0.016] 2.50 [0.096] 2 3 2.06 [0.081] 4.41 [0.163] 5.33 [0.210] 0.99 [0.039] 1.27 [0.050] 0.58 [0.023] 0.38 [0.015] 1.50 [0.059] 3.00 [0.118] 0.76 [0.030] 0.64 [0.025] DIMENSIONS IN MILLIMETERS [INCHES] 0.86 [0.034] 3.86 [0.152] MARKINGS: XXXXXXX = MIMIX MODEL NO. XXXXXX = WAFER LOT NO. ZYYWW = DATE CODE (YR/WEEK) FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA Ordering Information Part Number for Ordering CMM6003-SC-0G00 CMM6003-SC-0G0T PB-CMM6003-SC-0000 PB-CMM6003-SC-00A0 Description Matte Tin plated RoHS compliant SOT-89 surface-mount power package in bulk quantity Matte Tin plated RoHS compliant SOT-89 surface-mount power package in tape and reel 50 Ohm Evaluation Board 75 Ohm Evaluation Board We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.