HP HLMP-3316-I00XX T-13/4 (5 mm) high intensity led lamp Datasheet

T-13/4 (5 mm) High Intensity
LED Lamps
Technical Data
HLMP-331x Series
HLMP-341x Series
HLMP-351x Series
Features
• High Intensity
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-13/4 Diameter
Package
• Selected Minimum
Intensities
• Narrow Viewing Angle
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
Description
This family of T-13/4 nondiffused
LED lamps is specially designed
for applications requiring higher
on-axis intensity than is
achievable with a standard lamp.
The light generated is focused to
a narrow beam to achieve this
effect.
Selection Guide
Luminous Intensity
Iv (mcd) @ 10 mA
Color
Red
Yellow
Green
Part Number
Min.
Max.
HLMP-3315
13.8
-
HLMP-3317
22.00
-
HLMP-3316-I00xx
22.0
-
HLMP-3316-IJ0xx
22.0
70.4
HLMP-3415
9.2
-
HLMP-3416
14.7
-
HLMP-3416-G00xx
14.7
-
HLMP-3416-IJ0xx
37.6
120.2
HLMP-3517
6.7
-
HLMP-3519
10.6
-
HLMP-3519-F00xx
10.6
-
HLMP-3519-IJ0xx
43.6
139.6
2
Package Dimensions
Part Numbering System
HLMP - 3 x 1 x - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B1: Right Angle Housing, Uneven Leads
B2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
5, 7: Less Brightness
6, 9: Higher Brightness
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
3
Electrical Characteristics at TA = 25°C
Symbol
IV
2θ1/2
Description
Luminous Intensity
Including Angle
Between Half
Luminous Intensity
Points
Device
HLMP-
Min.
Typ.
3315
3316
13.8
22
3415
3416
3517
3519
Max.
Units
Test Conditions
40.0
60.0
mcd
IF = 10 mA (Figure 3)
9.2
14.7
40.0
50.0
mcd
IF = 10 mA (Figure 8)
6.7
10.6
50.0
70.0
mcd
IF = 10 mA (Figure 13)
3315
3316
35
35
Deg.
IF = 10 mA
See Note 1 (Figure 6)
3415
3416
35
35
Deg.
IF = 10 mA
See Note 1 (Figure 11)
3517
3519
24
24
Deg.
IF = 10 mA
See Note 1 (Figure 16)
λPEAK
Peak Wavelength
331X
341X
351X
635
583
565
nm
∆λ1/2
Spectral Line Halfwidth
331X
341X
351X
40
36
28
nm
λd
Dominant Wavelength
331X
341X
351X
626
585
569
nm
τs
Speed of Response
331X
341X
351X
90
90
500
ns
C
Capacitance
331X
341X
351X
11
15
18
pF
Thermal Resistance
331X
341X
351X
260
°C/W
VF
Forward Voltage
331X
341X
351X
1.9
2.0
2.1
VR
Reverse Breakdown Volt.
ηV
Luminous Efficacy
RθJ-PIN
All
331X
341X
351X
5.0
145
500
595
2.4
2.4
2.7
Measurement at Peak
(Figure 1)
See Note 2 (Figure 1)
VF = 0; f = 1 MHz
Junction to Cathode
Lead
V
IF = 10 mA (Figure 2)
IF = 10 mA (Figure 7)
IF = 10 mA (Figure 12)
V
IR = 100 µA
lumens
Watt
See Note 3
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation I e = Iv/ηv, where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt.
4
Absolute Maximum Ratings at TA = 25°C
Parameter
Peak Forward Current
Average Forward
DC
Current[1]
Current[2]
Power
Dissipation[3]
Reverse Voltage (IR = 100 µA)
Transient Forward
(10 µsec Pulse)
Current[4]
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
331X Series
341X Series
351X Series
Units
90
60
90
mA
25
20
25
mA
30
20
30
mA
135
85
135
mW
5
5
5
V
500
500
500
mA
110
110
110
°C
-55 to +100
-55 to +100
-20 to +100
°C
-55 to +100
260°C for 5 seconds
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
Figure 1. Relative Intensity vs. Wavelength.
5
High Efficiency Red HLMP-331X Series
Figure 2. Forward Current vs.
Forward Voltage Characteristics.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
6
Yellow HLMP-341X Series
Figure 7. Forward Current vs.
Forward Voltage Characteristics.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 8. Relative Luminous Intensity
vs. DC Forward Current.
Figure 9. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
7
Green HLMP-351X Series
Figure 12. Forward Current vs.
Forward Voltage Characteristics.
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration (IDC MAX
as per MAX Ratings).
Figure 13. Relative Luminous
Intensity vs. DC Forward Current.
Figure 14. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 16. Relative Luminous Intensity vs. Angular Displacement. T-1 3/4
Lamp.
8
Table 2. Intensity Bin Limit
Intensity Range
(mcd)
Color Bin Min.
Max.
H
15.5
24.8
I
24.8
39.6
J
39.6
63.4
K
63.4
101.5
L
101.5 162.4
M
162.4 234.6
N
234.6 340.0
O
340.0 540.0
Red
P
540.0 850.0
Q
850.0 1200.0
R
1200.0 1700.0
S
1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
Maximum tolerance for each bin limit is ± 18%.
Table 2. (Cont'd)
Intensity Range
(mcd)
Color Bin Min.
Max.
G
16.6
26.5
H
26.5
42.3
I
42.3
67.7
J
67.7
108.2
K
108.2 173.2
L
173.2 250.0
M
250.0 360.0
Yellow
N
360.0 510.0
O
510.0 800.0
P
800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S
2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Table 2. (Cont'd)
Intensity Range
(mcd)
Color Bin Min.
Max.
E
7.6
12.0
F
12.0
19.1
G
19.1
30.7
H
30.7
49.1
I
49.1
78.5
J
78.5
125.7
K
125.7 201.1
L
201.1 289.0
Green
M
289.0 417.0
N
417.0 680.0
O
680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S
4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
9
Color Categories
Color
Cat #
Green
Yellow
Lambda (nm)
Min.
Max.
6
561.5
564.5
5
564.5
567.5
4
567.5
570.5
3
570.5
573.5
2
573.5
576.5
1
582.0
584.5
3
584.5
587.0
2
587.0
589.5
4
589.5
592.0
5
592.0
593.0
Tolerance for each bin limit is ± 0.5 nm.
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Bulk Packaging, minimum increment 500 pcs/bag
01
Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
B1
Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Note:
All Categories are established for classification of products. Products may not be available in all categories. Please contact your local
Agilent representative for further clarification/information.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
July 16, 2001
Obsoletes 5964-9293E (4/96)
5988-2146EN
Similar pages