MEDER electronic DIP Series Molded DIP Reed Relays DESCRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. CHARACTERISTICS • Low profile package • Standard pin configurations • IC-pin compatible • 4.25 kVDC breakdown voltage for pin out 13 • UL approval FEATURES • High resistance option available • SMD version available • Diode option available • Mercury wetted switch option available DIMENSIONS All dimensions in mm [inches] www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 267 DIP Series MEDER electronic Molded DIP Reed Relays ORDER INFORMATION RELAY NOMINAL CONTACT SWITCH SERIES VOLTAGE FORM MODEL DIP XX - XX XX - 1A 05, 12, 15, OPTIONS 24 1B 1C ( ) VERSION WITH MAGNETIC SHIELD XX X 11, 13* 72, 75 2A 05, 12 OPTION PIN OUT 19 L (M), D (Q), E (R), F (S) 21 90 Part Number Example DIP12 - 1A72 - 13L 12 is the nominal voltage 1A is the contact form 72 is the switch model 13 is the pin out L is the option 51 * Selects 4.25 kVDC (3.0kVRMS) breakdown voltage contact to coil. PIN OUT www.meder.com 268 Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic DIP Series Molded DIP Reed Relays OPTIONS ( ) Versions with magnetic shield OPTIONS DEPENDENCE ON CASE SIZES CONTACT FOR M PACKAGE SIZE OPTIONS PIN OUT L 11 X 13 X D E F M Q X X X R S X Low Profile 1A 11 X 13 X X X X X X High Profile 1B High Profile 19 X X 2A High Profile 21 X X X X X X X X X X X X X X X 1C X Low Profile 51 High Profile L D E F = = = = M Q = = R = S = No option With Diode between pin 2 and 6 (Pin 2 is positive) Internal shield on pin 9 With Diode between pin 2 and 6 (Pin 2 is positive) and Internal shield on pin 9 External magnetic shield External magnetic shield and diode between pin 2 and 6 (Pin 2 is positive) External magnetic shield and internal shield on pin 9 External magnetic shield and with diode between pin 2 and 6 (Pin 2 is positive) and internal shield on pin 9 www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 269 DIP Series MEDER electronic Molded DIP Reed Relays RELAY DATA All data at 20 0C Switch Model --> Contact For m --> Contact Ratings Conditions Contact 72 For m A / B Contact 75 For m A / B Contact 90 For m C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.'s 20 10 3 W Switching Voltage D C or peak A C 200 1000 175 V Switching Current D C or peak A C 1.0 0.5 0.25 A Carry Current D C or peak A C 1.25 1.0 1.2 A Static Contact Resistance w/ 0.5V & 50mA 150 200 150 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 250 mΩ Insulation Resistance (100 Volts applied) Across contacts Contact to coil 1 0 12 1 0 12 1 0 10 1 0 12 109 1 0 12 Ω Breakdown Voltage Across contacts Contact to coil 320 1500* 1000** 1500* 200 1500 VD C Operate Time, incl. Bounce Measured w/ 100% overdrive 200 200 0.5 Reset Time Measured w/ no coil suppression Capacitance Across contacts Contact to coil 0.5 0.1 0.1 0.7 ms 1.5 ms 0.2 2.0 0.4 2.0 1.0 3.0 pF 1000 500 100 106 Cycles Life Expectancies Switching 5 Volts@ 10mA DC only & <10 pF stray cap. For other load requirements please see our life test section located on page 151. Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 50 50 g Vibration Resistance From 10 - 2000 Hz 20 20 20 g Ambient Temperature 10 0C/ minute max. allowable -20 70 -20 70 -20 70 0 C Storage Temperature 10 0C/ minute max. allowable -35 95 -35 95 -35 95 0 C Soldering Temperature 5 sec. dwell 260 0 C 260 260 * Selects pin out 13 and 4.25 kVDC (3.0 kVRMS) breakdown voltage contact to coil. ** For higher voltage requirements please consult factory. www.meder.com 270 Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic DIP Series Molded DIP Reed Relays COIL DATA CONTACT FOR M SWITCH MODEL All data at 20 0C * 1A 1B** 72 75 2A 1C 90 COIL VOLTAGE COIL RESISTANCE PULL-IN VOLTAGE DROP-OUT VOLTAGE NOMINAL COIL POWER VD C Ω VD C VD C mW Nom. Max. Min. Typ. Max. Min. Max. Min. Max. Typ. 5 7.5 450 (180) 500 (200) 550 (220) 0.85 3.5 0.75 3.4 50 12 16 900 1000 1100 1.9 8.4 1.8 8.3 145 15 20 1800 2000 2200 2.3 10.5 2.2 10.4 115 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 5 7.5 450 (180) 500 (200) 550 (220) 0.85 3.5 0.75 3.4 50 12 16 900 1000 1100 1.9 8.4 1.8 8.3 145 15 20 1800 2000 2200 2.3 10.5 2.2 10.4 115 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 5 7.5 180 (126) 200 (140) 220 (154) 0.85 3.5 0.75 3.4 125 12 16 450 500 550 1.9 8.4 1.8 8.3 290 15 20 1800 2000 2200 2.3 10.5 2.2 10.4 115 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 5 7.5 180 200 220 0.85 3.5 0.75 3.4 125 12 16 450 500 550 1.9 8.4 1.8 8.3 290 15 20 1800 2000 2200 2.3 10.5 2.2 10.4 115 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 ( ) versions with magnetic shield. * The pull-in / drop-out voltage and coil resistance will change at the rate of 0.4% per 0C. ** Reclosure of the Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. Pin two is positive. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 271