RHOPOINT CHS0805 High-value chip resistor Datasheet

SRT Resistor Technology
High-Value Chip Resistors
Type: CHS
Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020
Features:
•
•
•
•
•
•
•
High Value Chip Resistors in Thickfilm
Low temperature and voltage dependency
Untrimmed for higher Working Voltage up to 6000 V
Suitable for high vacuum applicatons – no organics
Contact areas PtAg for soldering and conductive glueing
High temperature application possible (up to 300°C)
non-magnetic
Dimensions:
Size
L
B
D
C
0402
1.04 ±0.05
0.50 ±0.05
0.30
0603
1.50 +0.15/-0.05
0.80 +0.15/-0.05
0.40 +0.15/-0.05
0.2 +0.2/-0.1
0805
2.00 +0.15/-0.05
1.25 +0.15/-0.05
0.40 +0.15/-0.05
0.3 +0.2/-0.1
1206
3.20 +0.15/-0.05
1.50 +0.2/-0.05
0.40 +0.15/-0.05
0.3 +0.2/-0.1
1210
3.20 +0.15/-0.05
2.50 +0.2/-0.05
0.50 +0.15/-0.05
0.8 ±0.2
2512
6.30 +0.15/-0.05
3.50 +0.2/-0.05
0.60 +0.15/-0.05
0.9 ±0.2
4020
10.20 +0.15/-0.05
5.10 +0.2/-0.05
0.60 +0.15/-0.05
0.9 ±0.2
+0.15/-0.05
B
0.1 +0.1/-0.05
D
L
C
L = Length, B = Width, D = Thickness, C = Width of wrap around (in mm)
Packaging:
Bulk in plastic bags – minimum quantity 100 pieces per value
Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value
Reel diameter 180 mm or 330 mm
Ordering Data:
Type – value – tolerance – TCR – packaging
Example: CHS 4020 10G ±10% TCR 100 Tape 180 mm
Untrimmed parts are indicated by the extension “NA” in the order code:
Type – value – tolerance – NA – TCR - packaging
Example: CHS 4020 10G ±10% NA TCR 100 Tape 180 mm
If no requirements for TCR and taping are given, the standard value (highest value in table) will be
supplied and packaging is bulk. Standard measuring voltage is 10V, required different voltages are
to specify explicitly.
Issue 07-2008
SRT Resistor Technology GmbH
Ostlandstr. 31
D-90556 Cadolzburg
Germany
Fon:
Fax:
E-mail:
Internet:
+49 (0)9103 / 7952-0
+49 (0)9103 / 5128
[email protected]
www.srt-restech.de
SRT Resistor Technology
High-Value Chip Resistors
Type: CHS
Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020
Technical data – depending on size:
Size
0402
Power rating P70 (mW)
(P155 = 0 mW)
Max. Working Voltage
U_, Ueff (V)
trimmed
untrimmed (Tol. > 5%)
0603
0805
1206
1210
2512
4020
1)
50
100
125
250
350
30
100
75
220
100
300
200
600
300
900
1000
2000
5/10/20%
TC50/100
<500 ppm/V
5/10/20%
TC100/250
<1000 ppm/V
5/10/20%
TC250/500
<1000 ppm/V
10/20/30%
TC1000/2000
<2000 ppm/V
1/5/10/20%
TC50/100
<250 ppm/V
2/5/10/20%
TC100/250
<500 ppm/V
5/10/20%
TC250/500
<500 ppm/V
5/10/20/30%
TC500/1000
<2000 ppm/V
10/20/30%
TC1000/2000
<10000 ppm/V
10/20/30%
TC3000
<15000 ppm/V
0.5/1/5/10/20%
TC50/100
<100 ppm/V
2/5/10/20%
TC100/250
<250 ppm/V
5/10/20%
TC250/500
<250 ppm/V
5/10/20%
TC500/1000
<1000 ppm/V
10/20/30%
TC1000/2000
<5000 ppm/V
10/20/30%
TC3000
<10000 ppm/V
0.5/1/5/10/20%
TC25/50/100
<100 ppm/V
2/5/10/20%
TC50/100/250
<100 ppm/V
5/10/20%
TC100/250
<250 ppm/V
5/10/20%
TC500/1000
<1000 ppm/V
10/20/30%
TC1000/2000
<2000 ppm/V
10/20/30%
TC3000
<5000 ppm/V
0.5/1/5/10/20%
TC25/50/100
<50 ppm/V
2/5/10/20%
TC50/100/250
<100 ppm/V
5/10/20%
TC100/250
<100 ppm/V
5/10/20%
TC250/500
<500 ppm/V
5/10/20%
TC500/1000
<1000 ppm/V
10/20/30%
TC1000/2000
<2000 ppm/V
0.5/…/20%
TC25/50/100
<10 ppm/V
1/5/10/20%
TC25/50/100
<25 ppm/V
1/5/10/20%
TC100/250
<25 ppm/V
2/5/10/20%
TC250/500
<100 ppm/V
5/10/20%
TC250/500
<250 ppm/V
10/20/30%
TC500/1000
<500 ppm/V
1000
1500
1)
4000
6000
Ranges/Tolerances/
TCR2)/VCR
10M – 100M
>100M – 500M
>500M – 1G
>1G – 10G
>10G – 100G
>100G – 1T
0.25/…/10%
TC25/50/100
<5 ppm/V
0.5/…/20%
TC25/50/100
<10 ppm/V
1/5/10/20%
TC25/50/100
<10 ppm/V
2/5/10/20%
TC50/100
<25 ppm/V
5/10/20/30%
TC100/250
<100 ppm/V
10/20/30%
TC250/500
<250 ppm/V
1)
At continuous power dissipation the dimensions of solder-pads have to secure sufficient heat-conduction
TC25/50: Temperature range +25°C...+85°C
Lower values of tolerance, TCR and VCR on request and agreement
2)
Technical data – general:
Temperature range
-55°C ... +155°C
Climatic category acc. to DIN EN 60068-1
55/155/56
Solderability acc DIN EN 60068-2-58 (lead-free and lead-containing)
Maximum soldering temperature acc. DIN EN 60068-2-58
3)
250°C, 3s
260°C, 10s
Extended temperature range up to 300°C possible- see datasheet: High temperature chip resistors
Long term stability
<1G
<10G
≥10G
Storage 125°C/1000h
<1%
<2%
<5%
<0.5%
<1%
<2%
Maximum Voltage/1000h
3)
Up to 6 months after shipment; longer at storage in Nitrogen
Data not specified according EN 140401-802 (CECC 40401-802)
Issue 07-2008
SRT Resistor Technology GmbH
Ostlandstr. 31
D-90556 Cadolzburg
Germany
Fon:
Fax:
E-mail:
Internet:
+49 (0)9103 / 7952-0
+49 (0)9103 / 5128
[email protected]
www.srt-restech.de
Similar pages