S P E F C I L E ET-PKT100B Bracket assembly D escription This bracket assembly is used when mounting a Panasonic’s applicable projector to ceilings. This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKV100H/PKV100S ceiling mount bracket. NOTE: Specifications Dimensions (W × H × D): Weight: Applicable ceiling mount bracket: Applicable projector: 295 × 46 × 275 mm (11-5/8 × 1-13/16 × 10-13/16 inches) Approx. 1.9 kg* (4.2 lbs*) ET-PKV100H/PKV100S PT-TW231R/TW230 * Average value. May differ depending on models. Parts Projector mount bracket (bracket assembly) . . . . 1 Washer-fitted hexagonal bolts (M4 × 12) . . . . . . . 4 Washer-fitted hexagonal bolts (M5 × 18) . . . . . . . 5 Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. 46 (1-13/16 ) 295 (11-5/8 ) Dimensions 275 (10-13/16 ) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. As of February 2012 SFL12A002 1/1