Aluminum Electrolytic Capacitors/ TK Surface Mount Type Series: TK Type: V ■ Features ● ● ● ● ● ● Endurance : 125 °C 3000 h Low ESR at –40 °C (50 % lower than TG series) Added ESR specification after the endurance test Vibration-proof product is available upon request. AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature Endurance Shelf Life ESR after the Life test –40 °C to +125 °C 10 V.DC to 35 V.DC 47 μF to 470 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached standard products list W.V. (V) 10 16 25 35 Z(–25 °C)/Z(+20 °C) 3 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 4 3 3 3 After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors shall meet the limits specified below. Capacitance change ±30 % of initially measured values (code U : ±35 %) tan d < 300 % of initially specified values (code U : ±350 %) DC leakage current < initially specified values After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall meet the specified below. 20 °C < 150 % of the initially measured specified value. After 1000 hours –40 °C < 200 % of the initially measured specified value. 20 °C < 300 % of the initially measured specified value. After 2000 hours –40 °C < 400 % of the initially measured specified value. 20 °C < 1000 % of the initially measured specified value. After 3000 hours –40 °C < 1500 % of the initially measured specified value. ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor ■ Marking 120 0.65 1k 0.85 10 k 0.95 100 k to 1.00 ■ Dimensions in mm (not to scale) (Unit : mm) 0.3 max. + (I) L Pressure Relief (010 and larger) (P) B±0.2 Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark H 0D±0.5 Capacitance (μF) " 5, A±0.2 – K Negative polarity marking (–) (I) Example:10 V 220 μF (polarized) Marking color: BLACK W ( ) Reference size Lot number Rated Voltage Mark A 10 V C 16 V E 25 V V 35 V Size code D L A, B H I W P K F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2014 – EEE-55 – Aluminum Electrolytic Capacitors/ TK ■ Standard Products Endurance : 125 °C 3000 h Case size W.V. (V) 10 Cap. (±20 %) (μF) 220 330 470 100 16 220 330 100 25 220 330 47 35 100 220 Dia. (mm) 8 8 10 10 8 8 10 10 8 8 10 10 8 8 10 10 Ripple Current ✽Size (100 kHz) Length Code (+125 °C) (mm) 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification F (F) G (G) F (F) G (G) F (F) G (G) F (F) G (G) ESR (100 kHz) (Ω) (mA r.m.s.) +20 ºC -40 ºC 197 0.3 5 197 0.3 5 270 0.2 3 270 0.2 3 197 0.3 5 197 0.3 5 270 0.2 3 270 0.2 3 197 0.3 5 197 0.3 5 270 0.2 3 270 0.2 3 197 0.3 5 197 0.3 5 270 0.2 3 270 0.2 3 tan d Part No. (120 Hz) (RoHS:compliant) Reflow (+20 °C) 0.30 0.30 0.30 0.30 0.23 0.23 0.23 0.23 0.18 0.18 0.18 0.18 0.16 0.16 0.16 0.16 EEETK1A221P EEETK1A331UP EEETK1A331P EEETK1A471UP EEETK1C101P EEETK1C221UP EEETK1C221P EEETK1C331UP EEETK1E101P EEETK1E221UP EEETK1E221P EEETK1E331UP EEETK1V470P EEETK1V101UP EEETK1V101P EEETK1V221UP (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) Taping (pcs) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2014 – EEE-56 –