DCDC 3 Watts IR Series xppower.com • Single & Dual Output • SIP Package • 1000 VDC Isolation • Optional 3000 VDC Isolation • 40 °C to +85 °C Operation • Semiregulated • 3 Year Warranty Specification Input Voltage Range Input Reflected Ripple Current Input Reverse Voltage Protection No Load Output Input Voltage Current Input Voltage Input • Nominal ±10% • 20 mA pk-pk, 5 Hz to 20 MHz • None 5 VDC Output Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Maximum Capacitive • Load See table None(1) 1.2%/1% ∆ Vin See table +2%, -4% 50 mV pk-pk max, 20 MHz bandwidth(2) 0.02%/°C See table 12 VDC General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF • • • • • • 5.0 V 600 mA 220 µF 79% 8.0% IR0505SA†^ 70 mA 9.0 V 333 mA 220 µF 84% 7.0% IR0509SA†^ 70 mA 12.0 V 250 mA 100 µF 84% 6.0% IR0512SA†^ 80 mA 15.0 V 200 mA 100 µF 84% 6.0% IR0515SA†^ 80 mA ±5.0 V ±300 mA ±100 µF 82% 7.0% IR0505S†^ 70 mA ±9.0 V ±167 mA ±100 µF 85% 6.0% IR0509S†^ 70 mA ±12.0 V ±125 mA ±47 µF 85% 6.0% IR0512S†^ 70 mA ±15.0 V ±100 mA ±47 µF 86% 5.0% IR0515S†^ 25 mA 5.0 V 600 mA 220 µF 84% 6.0% IR1205SA†^ 25 mA 9.0 V 333 mA 220 µF 87% 4.0% IR1209SA†^ 25 mA 12.0 V 250 mA 100 µF 88% 4.0% IR1212SA†^ 20 mA 15.0 V 200 mA 100 µF 90% 3.0% IR1215SA†^ 25 mA ±5.0 V ±300 mA ±100 µF 85% 5.0% IR1205S†^ 25 mA ±9.0 V ±167 mA ±100 µF 88% 4.0% IR1209S†^ 25 mA ±12.0 V ±125 mA ±47 µF 89% 3.0% IR1212S†^ 20 mA ±15.0 V ±100 mA ±47 µF 90% 3.0% IR1215S†^ See table † Available from Farnell & element14. See pages 284-290. 1000 VDC minimum, 3000 VDC option(3) ^ Available from Newark. See pages 291-296. 109Ω Mechanical Details 60 pF typical 0.28 Variable, 60 kHz -85 kHz 0.76 (19.50) (7.20) >1.1 MHrs to MIL-HDBK-217F at 25 °C, GB 0.37 (9.50) • • • • Model Number 80 mA Environmental Operating Temperature Storage Temperature Case Temperature Cooling Max Output Load Capacitive Efficiency Current Reg. Load -40 °C to +85 °C -40 °C to +125 °C 100 °C max Convection-cooled 0.39 (10.0) 0.02 (0.50) 0.12 (3.05) 0.10 (2.54) 0.60 (15.24) 0.02 (0.50) 0.28 (7.20) 1 0.05 (1.25) 2 0.02 (0.50) Notes 1. Operation at no load will not damage unit but it may not meet all specifications. 2. Output capacitor of 1 µF required to meet quoted ripple and noise. 3. For optional 3 kV isolation, add suffix ‘-H’ to the model number. 4. All dimensions in inches (mm). 5. Pin pitch tolerance: ±0.014 (±0.35) 6. Case tolerance: ±0.02 (±0.5) 7. Weight: 0.006 lbs (2.8 g) Pin 1 2 4 5 6 7 4 Single +Vin -Vin -Vout N.P +Vout N.P 5 6 7 0.01 (0.25) Pin Connections Dual +Vin -Vin -Vout Common +Vout N.P Single-H +Vin -Vin N.P -Vout N.P +Vout Dual-H +Vin -Vin N.P -Vout Common +Vout 21-Jan-11