AAC CJ181003JB Thick film chip resistor Datasheet

Thick Film Chip Resistors
HOW TO ORDER
CR
10
- 1003 F
M
Packaging
M = 7” Reel
B = Bulk
O = Cutting Tape
K = Sample Kit
Tolerance (%)
J = +5 F = +1 G = +0.5 D = +0.1
EIA Resistance Value
Standard Decade Values
Size
20 = 0201
05 = 0402
16 = 0603
12 = 2010
10 = 0805
18 = 1206
14 = 1210
01 = 2512
Series
CJ = Jumper
FEATURES
01P = 2512-P
00 = 01005
Excellent stability over a wide range of
environmental conditions
Small size to 01005
RoHs Compliance
CR = Resistor
SCHEMATIC
Wrap Around Terminal
CR, CJ, type
Overcoat
Conductor
Wrap Around
Termination Material:
Sn
Ceramic Substrate
Resistive Element
DIMENSIONS (mm)
Size Code
L
W
c
d
t
01005
Size
00
0.40 + 0.03
0.20 + 0.03
0.10 + 0.05
0.10 + 0.05
0.13 + 0.05
0201
20
0.60 + 0.03
0.30 + 0.03
0.10 + 0.05
0.15 + 0.05
0.23 + 0.03
0402
05
1.00 +0.1-0.05
0.50+ 0.05
0.20 + 0.10
0.25+ 0.10
0.35 + 0.05
0603
16
1.60 + 0.10
0.80 + 0.10
0.30 + 0.20
0.30+0.20-0.10
0.45 + 0.10
0805
10
2.00 + 0.10
1.25 + 0.10
0.40 + 0.20
0.40 + 0.20
0.50 + 0.10
1206
18
3.10 + 0.10
1.55 + 0.10
0.50 + 0.30
0.40 + 0.20
0.55 + 0.10
1210
14
3.10 + 0.10
2.55 + 0.10
0.50 + 0.30
0.40 + 0.20
0.60 + 0.10
2010
12
5.00 + 0.15
2.50 + 0.15
0.60 + 0.30
0.50+ 0.25
0.60 + 0.10
2512
01
6.30 + 0.20
3.20 + 0.20
0.60 + 0.30
0.50+ 0.25
0.60 + 0.10
01P
6.30 + 0.20
3.20 + 0.20
0.60 + 0.30
0.50+ 0.25
0.60 + 0.10
2512-P
ELECTRICAL SPECIFICATIONS for CHIP RESISTORS
Size
01005
0201
0402
0603
Power Rating (EIA 575)
1/32W
1/20W
1/16W
1/10W
1/8W
Max. Working Voltage*
15V
25V
50V
50V
150V
Max. Overload Voltage
30V
50V
100V
100V
300V
Operating Temp.
70°C
70°C
70°C
70°C
70°C
Size
Power Rating (EIA 575)
Max. Working Voltage*
Max. Overload Voltage
Operating Temp.
American Accurate Components, Inc.
1206
1/4W
200V
400V
70°C
1210
1/3W
200V
400V
70°C
2010
1/2W
200V
400V
70°C
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected]
0805
2512
1W
200V
400V
70°C
1
Thick Film Chip Resistors
Tolerance (%) and Resistance
Size
TCR (ppm/°°C)
D(±0.1%)
&
E-96 & E-24
G(±0.5%)
&
E-96 & E-24
± 300
01005
± 200
0201
0402
±200
+600
-200
±100
±200
J(±5%)
&
E-24
10Ω≤R<100Ω
100Ω≤R<1MΩ
100Ω≤R<1MΩ
100Ω-10KΩ
10Ω-2MΩ
10Ω-10MΩ
1Ω-9.1Ω
1Ω-9.1Ω
100Ω-499KΩ
100Ω-1MΩ
10Ω-100Ω
10Ω-100Ω
100Ω-1MΩ
10Ω≤R<100Ω
1MΩ<R≤10MΩ
+500
-200
±400
±100
±200
0603
F(±1%)
&
E-96 & E-24
10Ω≤R<100Ω
1Ω-9.1Ω
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
1M<R≤10MΩ
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
±200
1M<R≤10MΩ
±400
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
1M<R≤10MΩ
±400
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
1M<R≤10MΩ
±400
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
1Ω-9.1Ω
±100
±200
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
1M<R≤10MΩ
±400
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
1Ω-9.1Ω
±100
2512
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
1Ω-9.1Ω
±100
±200
2010
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
1Ω-9.1Ω
±100
±200
1210
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
1Ω-9.1Ω
±100
1206
1Ω-9.1Ω
10MΩ≤R≤20MΩ
±400
0805
10Ω-10MΩ
10Ω-560kΩ
10Ω-1MΩ
10Ω-1MΩ
±200
1M<R≤10MΩ
±400
1Ω-9.1Ω
10Ω-10MΩ
1Ω-9.1Ω
10MΩ<R≤20MΩ
* Rated Voltage: √PxR
ELECTRICAL SPECIFICATIONS for ZERO OHM JUMPERS
Series
CJ20 (0201)
CJ05 (0402)
CJ06 (0603)
CJ10 (0805)
CJ18 (1206)
CJ14 (1210)
CJ12 (2010)
CJ01 (2512)
Rated Current
0.5A (70°C)
1A (70°C)
1A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
2A (70°C)
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
50 m Ω
2.5A
2.5A
5A
5A
5A
5A
5A
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
-55°C ~ +125°C
Resistance (Max)
Max. Overload Current
Working Temp.
1A
-55°C ~ +125°C
* Rated Voltage: √PxR
American Accurate Components, Inc.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected]
2
Thick Film Chip Resistors
DERATING CURVE
For resistors operated at ambient temperature over 70°, power rating shall be derated in accordance with figure
1.
Figure 1
The rated voltage is calculated by the following formula:
E=Rated Voltage(V),
P=Rated Power(W),
E= √P * R
R=Resistance Value(Ω)
RELIABILITY TESTS
Reference
standard
Test Items
Condition of Test
Test Limits ∆R
Temperature
Coefficient of
Resistance
IEC60115-1-4.8
JIS-C5201-1-4.8
-55~+125 °C
Refer 5.0
Short Time
Overload
IEC60115-1-4.13
JIS-C5201-1-4.13
2.5 X rate voltage for 5 sec
±(1% + 0.05Ω)
Remarks:
0201 : ±(3% + 0.1Ω)
0Ω : 50mΩ or less
Intermittent
Overload
IEC60115-1-4.39
JIS-C5201-1-4.39
3.0 X rated voltage or Max
Overloading voltage, 1sec “ON”,
25sec “OFF”, 10000 cycles
Remarks: 0201-NA, 0402 2.5 X
RCWV*)
Endurance (Load
Life)
IEC60115-1-4.25.1
JIS-C5201-14.25.1
1000 hours at rated voltage, 70°C,
1.5hours “ON”, 0.5hour “OFF”
Load Life with
Humidity
IEC60115-1-4.24
JIS-C5201-1-4.24
1000 hours at rated voltage,
40±2°C, 90~95% RH 1.5hours
“ON”, 0.5hour “OFF”
Rapid Change of
Temperature
IEC60115-1-4.19
JIS-C5201-1-4.19
-55°C (30 min.) / +155°C (30 min.) 5
cycles
Solderability
IEC60115-1-4.17
JIS-C5201-1-4.17
245±5°C solder, 2±0.5 sec dwell.
Solder: Sn96.5 / Ag3.0 / Cu0.5
Robustness of
Termination
(Bending)
IEC60115-1-4.33
JIS-C5201-1-4.33
3mm deflection
2mm deflection (RM20,25)
IEC60115-1-4.7
JIS-C5201-1-4.7
Applying voltage:
0201: 50V, 0402 & 0603: 300V The
other 500V for a minute
No abnormalities such as flashover, burning dielectric
breakdown shall appear
Applying voltage 100V for 1 minute.
Remark: 0201 50V
≥ 1GΩ
Dielectric
Withstanding
Voltage (Voltage
Proof)
Insulation
Resistance
Resistance to
Dry Heat
Resistance to
Solder Heat
IEC60115-1-4.6
JIS-C5201-1-4.6
IEC60115-1-4.23.2
JIS-C5201-14.23.2
IEC60115-1-4.18
JIS-C5201-1-4.18
155±5°C for 96±4hours
Remark: 0201 125±5°C
270±5°C solder, 10±1 sec dwell.
0402 : ±(2% + 0.1Ω)
±(5.0% + 0.1Ω)
0Ω : 50mΩ or less
0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(3.0%+ 0.1Ω)
Remarks:
0201 : ±(5% + 0.1Ω)
0402 : ±(3% + 0.1Ω)
0Ω : 100mΩ or less
0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(3.0%+ 0.1Ω)
Remarks:
0201 : ±(5.0% + 0.1Ω)
0402 : ±(3.0% + 0.1Ω)
0Ω : 100mΩ or less
0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0%+0.05Ω)
Remarks:
0201 : ±(3% + 0.1Ω)
0Ω : 50mΩ or less
At least 95% of surface area of electrode shall be covered with
new solder
0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0%+0.05Ω)
Remarks:
0201 : ±(1.0% + 0.1Ω)
0Ω : 50mΩ or less
0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(2.0% + 0.1Ω)
Remarks:
0201 : ±(2.0% + 0.1Ω)
0Ω : 50mΩ or less
0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0% + 0.05Ω)
Remarks:
0201 : ±(3.0% + 0.1Ω)
0Ω : 50mΩ or less
Note: RCWV: Rated continuous working voltage
American Accurate Components, Inc.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected]
3
Thick Film Chip Resistors
EIA Standard Values
Decade Values in the EIA Standard E-24 Series:
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
0603, 0805, 1206, 1210, 2010, 2512 Sizes
EIA 3 Digit Code of 10K ohm resistor
E-24 Values, E-96 Values
103
0805, 1206, 1210, 2010, 2512 Sizes
EIA 4 Digit Code of 121K ohm resistor
E-96 Values
1213
Decade Values in the EIA Standard E-96 Series:
1.00
1.02
1.05
1.07
1.10
1.13
1.15
1.18
1.21
1.24
1.27
1.30
1.33
1.37
1.40
1.43
1.47
1.50
1.54
1.58
1.62
1.65
1.69
1.74
1.78
1.80
1.82
1.87
1.91
1.96
2.00
2.05
2.10
2.15
2.20
2.21
2.26
2.32
2.37
2.43
2.49
2.56
2.61
2.67
2.74
2.80
2.87
2.94
3.00
3.01
3.09
3.16
3.24
3.32
3.40
3.48
3.57
3.65
3.74
3.83
3.90
3.92
4.02
4.12
4.22
4.32
4.42
4.53
4.64
4.70
4.75
4.87
4.99
5.11
5.23
5.36
5.49
5.60
5.62
5.76
5.90
6.04
6.19
6.20
6.34
6.49
6.65
6.80
6.81
6.98
7.15
7.35
7.50
7.68
7.87
8.06
8.25
8.45
8.56
8.87
9.09
9.31
9.53
9.76
10.0
10.2
10.5
10.7
11.0
11.3
11.5
11.8
12.0
12.1
12.4
12.7
13.0
13.3
13.7
14.0
14.3
14.7
15.0
15.4
15.8
16.0
16.2
16.5
16.9
17.4
17.8
18.0
18.2
18.7
19.1
19.6
20.0
20.5
21.0
21.5
22.0
22.1
22.6
23.2
23.7
24.0
24.3
24.9
25.5
26.1
26.7
27.0
27.4
28.0
28.7
29.4
30.0
30.1
30.9
31.6
32.4
33.0
33.2
34.0
34.8
35.7
36.0
36.5
37.4
38.3
39.0
39.2
40.2
41.2
42.2
43.0
43.2
44.2
45.3
46.4
47.0
47.5
48.7
49.9
51.0
51.1
52.3
53.6
54.9
56.0
56.2
57.6
59.0
60.4
61.9
62.0
63.4
64.9
65.5
68.0
68.1
69.8
71.5
73.2
75.0
76.8
78.7
80.6
82.0
82.5
84.5
86.6
88.7
90.9
91.0
93.1
95.3
97.6
Those items in a shaded box are also E-24 values and will be
marked with the EIA 3 Digit Code.
0603 MARKING CODE for E96 VALUES
By combining a specific two digit number and a letter code, you
have a series of numeric/alpha digits that give you the complete
(E96) resistance value codes for 0603 size part marking.
Value
Code
Value
Code
Value
Code
Value
Code
10.0
10.2
10.5
10.7
11.0
11.3
11.5
11.8
12.1
12.4
12.7
13.0
13.3
13.7
14.0
14.3
14.7
15.0
15.4
15.8
16.2
16.5
16.9
17.4
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
17.8
18.2
18.7
19.1
19.6
20.0
20.5
21.0
21.5
22.1
22.6
23.3
23.7
24.3
24.9
25.5
26.1
26.7
27.4
28.0
28.7
29.4
30.1
30.9
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
31.6
32.4
33.2
34.0
34.8
35.7
36.5
37.4
38.3
39.2
40.2
41.2
42.2
43.2
44.2
45.3
46.4
47.5
48.7
49.9
51.1
52.3
53.6
54.9
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
56.2
57.6
59.0
60.4
61.9
63.4
64.9
66.5
68.1
69.8
71.5
73.2
75.0
76.8
78.7
80.6
82.5
84.5
86.6
88.7
90.9
93.1
95.3
97.6
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
Letter Multiplier Cross Reference
A =10
C = 1,000
E = 100,000
B = 100
D = 10,000
F = 1,000,000
0603 Code
01B
25C
93D
Explanation
01 = 10.0 & B = 100
25 = 17.8 & C = 1,000
93 = 90.9 & D = 10,000
X=1
Y = 0.1
Value
10.0x100 = 1K Ω
17.8x1,000 = 17.8K Ω
90.9 x 10,000 = 909K Ω
VALUE MARKING
For those parts ordered with an E-24 value, the product will be
marked with a 3 digit code. For those products ordered with an
E-96 value, the product will be marked with a 4 digit code. For
those parts which fall under E-96 and E-24 values (e.g. 1K ohm
is both an E-96 and E-24 value), the part will be marked with a 3
digit code; 4 digit markings for this type is available upon special
request.
01005, 0201, and 0402 Size
No marking
E-24 & E-96 Values
51B
PACKAGE QUANTITY
Type
B
M
V
Type
B
M
V
01005
0201
0402
15,000
10,000
40,000
10,000
40,000
1206
5,000
5,000
20,000
0603
25,000
5,000
20,000
0805
10,000
5,000
20,000
1210
2010
2512
5,000
20,000
4,000
20,000
4,000
20,000
0603 Size
EIA 96 Digit Code of 3.32K ohm
E-96 Values
American Accurate Components, Inc.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected]
4
Thick Film Chip Resistors
TAPE SCHEMATIC
F
P1
T
Tp
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
5.5±0.05
4.0±0.1
1.0±0.1
0.25±0.1
5.5±0.05
4.0±0.1
1.0±0.1
0.25±0.1
TAPE
Type
Press Pocket Carrier Tape
Rect. Punching Carrier Paper Tape
Plastic (Embossed Tape)
Resistor Size
01005
0201, 0402, 0603, 0805, 1206, 1210
2010 & 2512
REEL DRAWINGS
01005 Size
A
0.38±0.02
P1
2.0±0.05
B
0.68±0.02
P0
4.0±0.10
W
8.0±0.10
D0
1.55±0.03
F
3.5±0.05
t1
0.42±0.05
E
1.75±0.05
t2
0.5
K
0.27±0.02
7” Reel (M)
13” Reel (V)
PACKAGE DIMENSIONS (mm)
M
H
C
G
E
F
0201 ~ 2512 Size
TAPE DIMENSIONS (mm)
A
B
W
E
F
P1
T
Tp
0201
0.37±0.05
0.67±0.1
8.0±0.2
1.75±0.1
3.5±0.05
2.0±0.1
0.5max
0.4+0.05
0402
0.65±0.1
1.15±0.1
8.0±0.2
1.75±0.10
3.5±0.05
2.0±0.05
0.55±0.1
0.40±0.05
0603
1.1±0.2
1.9±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.70±0.1
0.60±0.1
0805
1.65±0.2
2.4±0.2
8.0±0.2
1.75±0.1
3.5±0.05
4.0±0.1
0.90±0.1
0.75±0.1
A
B
W
E
1206
2.0±0.15
3.6±0.15
8.0±0.2
1.75±0.1
1210
2.9±0.1
3.5±0.1
8.0±0.2
1.75±0.1
2010
2.9±0.1
5.3±0.1
12.0±0.2
1.75±0.1
2512
3.4±0.1
6.6±0.1
12.0±0.2
1.75±0.1
7” Reel (M)
180 ± 3.0
1.20
13.0 ± 0.2
9.0 ± 0.3
60 ± 1.0
11.4 ± 1.0
13” Reel (V)
330±2.5
2.3± 0.5
13.0 ± 0.2
9.5 ± 0.5
80.0 ± 1.0
14.4
LABEL DESCRIPTION
One side surface of a reel is marked with a label with the
following items of information.
1. Chip Resistor
2. Part Number
3. Tolerance
4. Quantity
5. Lot number for production month/year/suffix L*
6. Manufacturer’s name or symbol
* The suffix “L” indicates that this item is lead free. As of September
2004, all new production items of the series CR and CJ are no
longer containing tin/lead (SnPb) terminals; they are lead free and in
compliance with Lead Free/RoHS.
PACKAGE CONSTRUCTION
3 Ring Binder Case Holder
Plastic pages with slip holders for each value
Each value is individually identified in a slip holder
Resistors are packaged on paper tape strips
The content may change without notification 7/21/2016.
American Accurate Components, Inc.
188 Technology Drive Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected]
5
Similar pages