Q Series 60...132 Watt DC-DC Converters Input voltage ranges up to 168 V DC 1 or 2 isolated outputs 3.3...48 V DC 3 kV AC I/O electric strengh test voltage LGA • Extremely slim case (4TE wide), fully enclosed • Extremely low inrush current, hot swappable • Operating ambient temperaturerange –40...71°C with convection cooling Selection chart Output 1 Uo nom Io nom [V DC] [A] 5.1 16 12 8 15 6.6 24 4 24 4.4 30 3.3 48 2.2 5.1 7.5 12 4 15 3.3 24 2.2 Io max [A] 16 8 6.6 4 4.4 3.3 2.2 7.5 4 3.3 2.2 Output 1 Uo nom Io nom Io max [V DC] [A] [A] 3.3 18 22 5.1 16 20 12 8 10 15 6.6 8 24 4.4 5.5 24 4 5 30 3.3 4 48 2.2 2.75 5.1 7.5 9.5 12 4 5 15 3.3 4 24 2.2 2.75 Output 2 Uo nom Io nom [V DC] [A] 5.1 7.5 12 4 15 3.3 24 2.2 Output 2 Uo nom Io nom Io max [V DC] [A] [A] 5.1 7.5 9.5 12 4 5 15 3.3 4 24 2.2 2.75 Io max [A] 7.5 4 3.3 2.2 Type Input Voltage 16...36 V DC 24Q1001-2R 24Q2320-2R 24Q2540-2R 24Q2320-2R 24Q2660-2R 24Q2540-2R 24Q2660-2R 24Q2001-2R 24Q2320-2R 24Q2540-2R 24Q2660-2R Type Input Voltage 14.4...36 V DC BQ 1101-7 BQ 1001-7R BQ 2320-7R BQ 2540-7R BQ 2660-7R BQ 2320-7R BQ 2540-7R BQ 2660-7R BQ 2001-7R BQ 2320-7R BQ 2540-7R BQ 2660-7R Type Input Voltage 38...75 V DC 48Q1001-2R 48Q2320-2R 48Q2540-2R 48Q2320-2R 48Q2660-2R 48Q2540-2R 48Q2660-2R 48Q2001-2R 48Q2320-2R 48Q2540-2R 48Q2660-2R Type Input Voltage 21.6...54 V DC GQ 1101-7 GQ 1001-7R GQ 2320-7R GQ 2540-7R GQ 2660-7R GQ 2320-7R GQ 2540-7R GQ 2660-7R GQ 2001-7R GQ 2320-7R GQ 2540-7R GQ 2660-7R Options P P P P P P P P P P P Type Input Voltage 35...75 V DC CQ 1101-7 CQ 1001-7R CQ 2320-7R CQ 2540-7R CQ 2660-7R CQ 2320-7R CQ 2540-7R CQ 2660-7R CQ 2001-7R CQ 2320-7R CQ 2540-7R CQ 2660-7R Options -9 -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P 2/12.2000 www.power-one.com 1 Cassette Style Output 1 Uo nom Io nom [V DC] [A] 3.3 18 5.1 16 12 8 15 6.6 24 4 24 4 30 3.3 48 2.2 5.1 7.5 12 4.4 15 3.3 24 2.2 Io max [A] 22 20 10 8 5.5 5 4 2.75 9.5 5 4 2.75 Q Series Output 2 Uo nom Io nom [V DC] [A] 5.1 7.5 12 4.4 15 3.3 24 2.2 Io max [A] 9.5 5 4 2.75 Type Input Voltage 43...108 V DC DQ 1101-7 DQ 1001-7R DQ 2320-7R DQ 2540-7R DQ 2660-7R DQ 2320-7R DQ 2540-7R DQ 2660-7R DQ 2001-7R DQ 2320-7R DQ 2540-7R DQ 2660-7R Type Input Voltage 65...168 V DC EQ 1101-7 EQ 1001-7R EQ 2320-7R EQ 2540-7R EQ 2660-7R EQ 2320-7R EQ 2540-7R EQ 2660-7R EQ 2001-7R EQ 2320-7R EQ 2540-7R EQ 2660-7R Options -9 -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P -9, P Input Input voltage Inrush current ETS 300 132-2 refer to selection chart typ. 40 A Output Efficiency Output voltage setting accuracy Worst case output voltage 1 Minimum output current 1, 2 Minimum output current 1, 2 Load regulation output 2 Output voltage switching noise Common current limit. Io1 + Io2 Operation of units in parallel Ui nom, Io nom up to 88% Ui nom, Io nom ±0.6% Uo nom Ui min...Ui max, 0...Io1 max, TC min...TC max ±1.8% Uo nom in parallel configuration not required 0A in individual or series configuration 10% Io1,2 nom Io1,2 min...Io1,2 max typ. 100 mΩ • (Io1 – Io2) IEC/EN 61204, total, peak-peak typ 0.3% Uo nom rectangular U/I characteristic typ. 130% (Io1 max + Io2 max) by connecting the current sharing pins T Protection Input reverse polarity Input undervoltage lockout Input overvoltage lockout Input transient protection Output Output overvoltage Overtemperature built-in fuse typ. 90% Ui min typ. 110% Ui max varistor no-load, overload and short-circuit proof second control loop switch-off with auto restart (-7 units) typ. 125% Uo nom TC typ. 100°C Control Output voltage adjustment Inhibit on input side Status indication Output good signal (Out OK) www.power-one.com with feature R 60/80...110% Uo nom TTL input, output(s) disabled if left open circuit LEDs: In OK (-7 units), Out OK (all) isolated open collector signal 2 Q Series 60...132 Watt DC-DC Converters Safety Approvals Class of equipment Protection degree Electric strength test voltage EN 60950, UL 1950, CSA C22.2 No. 950 I/case, O/case, Out OK/case I/O, Out OK/I, Out OK/O O/O class I IP 20/30 1.5 kV AC 3 kV AC 300 V DC IEC/EN 61000-4-2, level 4 (8/15 kV) IEC/EN 61000-4-3, level 3 (10 V/m) IEC/EN 61000-4-4, output/input, level 3/4 (2/4 kV) IEC/EN 61000-4-5, input, level 2/3 (1/2 kV) IEC/EN 61000-4-6, level 2/3 (3/10 V) CISPR 22/EN 55022, 24/48/BQ/CQ/GQ, conducted criterion B criterion A criterion B criterion B criterion A class B EMC Electrostatic discharge Electromagnetic field Electr. fast transients/bursts Surge Conducted disturbances Electromagnetic emissions Environmental –2 units Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump MTBF Ui nom, Io nom, convection cooled Ui nom, Io nom non operational IEC/EN 60068-2-3, 93%, 40°C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 6 ms IEC/EN 60068-2-29, 6 ms MIL-HDBK-217F, GB, 40°C, 24/48Q1000 –10...50°C –10...80°C –25...100°C 21 days 0.15 mm/2 gn 15 gn 10 gn 588'000 h Ui nom, Io nom, convection cooled Ui nom, Io max, convection cooled Ui nom, Io nom Ui nom, Io max non operational IEC/EN 60068-2-3, 93%, 40°C IEC/EN 60068-2-6, 10...60/60...2000 Hz IEC/EN 60068-2-27, 11 ms IEC/EN 60068-2-29, 11 ms IEC/EN 60068-2-64, 20...500 Hz MIL-HDBK-217F, notice 2, GB, 40°C, BQ 2000 –25...71°C –25...50°C –25...95°C –25...85°C –40...100°C 56 days 0.35 mm/5 gn 50 gn 25 gn 4.9 gn rms 853'000 h Environmental –7 units Operating ambient temperature Operating case temperature TC Storage temperature Damp heat Vibration, sinusoidal Shock Bump Random vibration MTBF Options Extended temperature range Output voltage adjustment –40...71°C, ambient, operating, for -7 units ±10% Uo nom, excludes feature R and vice versa -9 P Accessories Front panels for 19” rack mounting in 3U or 6U configuration (Schroff/Intermas) Mating H15 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Additional external input or output filters Mechanical mounting supports for chassis, DIN-rail and PCB mounting www.power-one.com 3 Cassette Style Q Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. European Projection 20 (0.79") S09051 104 (4.09") 171.93 (DIN 41494) (6.76") 105 (4.13") 127 (5.18") Measuring point of case temperature TC 60 (2.36") 111 (4.37") 19.8 (0.78") 8 (0.31") 164 (6.46") M3; 4 deep Potentiometer (option P) LED "OUT OK" Pin allocation Pin 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Electrical determination Output voltage (positive) Output voltage (positive) Output voltage (negative) Output voltage (negative) Sense line (positive) Sense line (negative) Output voltage control input Current sharing control input Do not connect (internal Gnd.) Output good signal (positive) Output good signal (negative) Protective earth Inhibit control input Input voltage (positive) Input voltage (negative) www.power-one.com Q 1000 Vo1+ Vo1+ Vo1– Vo1– S+ S– R T Out OK+ Out OK– Q 2000 Vo1+ Vo2+ Vo1– Vo2– S+ S– R T Out OK + Out OK – i Vi+ Vi– i Vi+ Vi– 4