DB107 -C-S-R01 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram DB-1 MECHANICAL DATA .255 (6.5) * Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233. .245 (6.2) .350 (8.9) .300 (7.6) .335 (8.51) .320 (8.12) .135 (3.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .115 (2.9) .165 (4.2) .020 (0.5) .155 (3.9) Single phase, half wave, 60 Hz, resistive or inductive load. .205 (5.2) For capacitive load, derate current by 20%. .195 (5.0) .060 (1.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range DB107-C-S-R01 UNITS 1000 Volts VRMS 700 Volts VDC 1000 Volts IO 1.0 Amps I FSM 50 Amps R θJA 40 RθJL 15 T J, T STG -55 to + 150 SYMBOL DB107-C-S-R01 UNITS VF 1.1 Volts 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 1.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted. IR 2.0 µAmps 0.5 mAmps 2007-1 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( DB107-C-S-R01 ) 10 1 0.1 T J = 25 OC Pulse Width = 300µS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 1.0 1.5 2.0 2.5 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 1.5 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (µA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA = 25 OC 10 1.0 0.1 0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.