DBL201G - DBL209G Single Phase2.0 AMP. Glass Passivated Bridge Rectifiers DBL Features Glass passivated junction Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High surge current capability High temperature soldering guaranteed: 260oC / 10 seconds at 5 lbs., ( 2.3 kg ) tension Small size, simple installation DBLS Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol DBL DBL DBL DBL DBL DBL DBL DBL DBL 201G 202G 203G 204G 205G 206G 207G 208G 209G Units DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS 201G 202G 203G 204G 205G 206G 207G 208G 209G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage VRRM 50 VRMS VDC Maximum Average Forward Rectified o Current @TA = 40 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A Maximum DC Reverse Current o @TA=25 C at Rated DC Blocking Voltage o @ TA=125 C Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range 100 200 400 600 800 1000 1200 1400 V 35 70 140 280 420 560 50 100 200 400 600 800 1000 1200 1400 V V 700 840 980 I(AV) 2.0 A IFSM 50 A VF 1.15 1.30 IR 10 500 RθJA RθJL 40 15 -55 to +150 -55 to +150 TJ TSTG Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) Coper Pads. http://www.luguang.cn mail:[email protected] V uA uA C /W o C C o o DBL201G - DBL209G Single Phase2.0 AMP. Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES (DBL(S)201G THRU DBL(S)209G) FIG.1- MAXIMUM DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 .06" (1.5mm) Tj=125 0C PCB Copper Pauls .51" x .51" (13mm x 13mm) 1.0 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 o AMBIENT TEMPERATURE. ( C) 120 140 150 FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 2.0 10 1 Tj=25 0C 0.1 0.01 50 40 Single Sine - Wave (JEDEC Method) 30 100 0 10 0 1 FIG.4- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 2 4 6 10 20 NUMBER OF CYCLES AT 60Hz 40 60 100 10 Tj=25 0C f=1.0MHz Vsig=50mVp-p FIG.5- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10 1 1 INSTANTANEOUS FORWARD CURRENT. (A) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 20 CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 60 10 REVERSE VOLTAGE. (V) 1 DBL201G-207G DBL208G-209G 0.1 0 Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 FORWARD VOLTAGE. (V) 1.2 1.4 http://www.luguang.cn mail:[email protected] 100