1246 POWER INDUCTORS Outgassing Compliant Power Inductors AE566PNB ■ High current, low DCR shielded power inductors ■ Passes NASA low outgassing specifications ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Tin-lead (Sn-Pb) terminations for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel over phos bronze. Weight: 2.3 g – 2.5 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 200/7″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.7mm pocket depth DCR Inductance2 (mOhms) Part number1 (µH) typ max AE566PNB102MSZ 1.0 ±20% 5.6 6.3 AE566PNB152MSZ 1.5 ±20% 8.7 9.7 AE566PNB272MSZ 2.7 ±20% 10.3 11.5 AE566PNB332MSZ 3.3 ±20% 15.1 16.8 AE566PNB472MSZ 4.7 ±20% 19.1 21.3 AE566PNB562MSZ 5.6 ±20% 22.1 24.6 AE566PNB682MSZ 6.8 ±20% 24.9 27.7 AE566PNB822MSZ 8.2 ±20% 27.4 30.5 AE566PNB103MSZ 10 ±20% 36.8 40.9 AE566PNB123MSZ 12 ±20% 38.9 43.3 AE566PNB153MSZ 15 ±20% 48.6 54.1 AE566PNB183MSZ 18 ±20% 51.0 56.7 AE566PNB223MSZ 22 ±20% 60.3 67.0 AE566PNB273MSZ 27 ±20% 67.5 75.0 AE566PNB333MSZ 33 ±20% 81.7 90.8 AE566PNB393MSZ 39 ±20% 95.2 105.8 AE566PNB473MSZ 47 ±20% 120.6 134.0 AE566PNB563MSZ 56 ±20% 133.8 148.7 AE566PNB683MSZ 68 ±20% 167.3 185.9 AE566PNB823MSZ 82 ±20% 188.5 209.5 AE566PNB104MSZ 100 ±20% 216.8 240.9 AE566PNB124KSZ 120 ±10% 287.2 319.2 AE566PNB154KSZ 150 ±10% 326.7 363.0 AE566PNB184KSZ 180 ±10% 379.5 421.7 AE566PNB224KSZ 220 ±10% 488.2 542.5 AE566PNB274KSZ 270 ±10% 560.1 622.4 AE566PNB334KSZ 330 ±10% 731.4 812.7 AE566PNB394KSZ 390 ±10% 813.7 904.2 AE566PNB474KSZ 470 ±10% 935.1 1039 AE566PNB564KSZ 560 ±10% 1193 1326 AE566PNB684KSZ 680 ±10% 1370 1523 AE566PNB824KSZ 820 ±10% 1590 1767 AE566PNB105KSZ 1000 ±10% 2090 2323 3 SRF4 (MHz) min typ 70.0 100 60.0 85.0 49.0 70.0 46.0 65.0 30.0 42.0 26.0 37.0 23.0 33.0 22.0 31.0 19.0 27.0 17.0 24.0 15.0 22.0 13.0 19.0 12.6 18.0 11.2 16.0 10.5 15.0 9.3 13.3 8.4 12.0 7.4 10.6 6.8 9.7 6.2 8.8 5.6 8.0 5.0 7.2 4.6 6.6 4.1 5.9 3.7 5.3 3.3 4.7 2.9 4.1 2.7 3.8 2.5 3.5 2.1 3.0 2.0 2.8 1.8 2.6 1.7 2.4 Isat (A)5 Irms (A)6 10% 20% 30% 20°C 40°C drop drop drop rise rise 18.14 20.64 22.24 6.00 8.00 14.06 15.90 17.08 5.80 7.80 11.66 13.16 14.16 5.00 6.80 9.74 11.08 11.98 4.50 6.30 8.62 9.70 10.42 4.40 6.00 7.62 8.74 9.44 3.95 5.75 7.38 8.36 9.00 3.70 5.20 6.84 7.70 8.32 3.35 4.67 5.88 6.66 7.18 2.85 3.90 5.34 6.04 6.52 2.69 3.65 4.68 5.36 5.78 2.50 3.40 4.32 4.92 5.32 2.41 3.19 3.84 4.34 4.75 2.30 3.14 3.54 4.02 4.32 2.06 2.86 3.24 3.66 3.96 1.90 2.60 3.04 3.46 3.72 1.73 2.39 2.70 3.08 3.34 1.50 2.10 2.46 2.80 3.02 1.44 2.01 2.26 2.54 2.74 1.30 1.80 1.98 2.26 2.46 1.24 1.72 1.84 2.08 2.24 1.19 1.65 1.62 1.86 2.04 1.03 1.42 1.48 1.70 1.82 0.95 1.30 1.36 1.56 1.68 0.89 1.21 1.22 1.38 1.50 0.76 1.00 1.12 1.26 1.36 0.72 0.95 1.00 1.10 1.20 0.65 0.87 0.946 1.00 1.10 0.59 0.79 0.864 0.978 1.00 0.56 0.76 0.776 0.884 0.956 0.50 0.67 0.720 0.818 0.882 0.46 0.62 0.634 0.728 0.792 0.43 0.58 0.594 0.676 0.728 0.36 0.50 AE566PNB105KSZ Testing: Z = COTS H = Screening per Coilcraft CP‑SA‑10001 N = Screening per Coilcraft CP‑SA‑10004 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD‑A fixture in an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document AE540-1 Revised 12/05/12 ® © Coilcraft, Inc. 2012 1. When ordering, please specify testing code: 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1246 POWER INDUCTORS AE566PNB Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 Frequency (MHz) 0.1 0.1 10 1 100 Current (A) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat 10 Irms 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in inches mm Document AE540-2 Revised 12/05/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.