Resistors Thick Film Chip Arrays BCN Series Features Thick Film Chip Resistor Arrays RoHS Compliant Sulphur resistant version available (Tested to ASTM-B809) AEC-Q200 (BCN164AB and BCN4D) All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Model Styles # of Resistors Circuit Package Size Chip Array Model BCN 10 (1.0mm) 4 Resistors Isolated 0804 0402 Model BCN 16 4ABI (1.6mm) 4 Resistors Isolated 1206 0603 Model BCN 16 4A/AB (1.6mm) 4 Resistors Isolated 1206 0603 Model (Width) Model BCN 16 8RB/8SB (1.6mm) 8 Resistors Bussed 1206 0603 Model BCN 21 (2.1mm) 8 Resistors Bussed 1608 0804 Model BCN 4D (3.1mm) 4 Resistors Isolated 2112 1206 Model BCN 4DBI (3.1mm) 4 Resistors Isolated 2112 1206 Model BCN 31 8RB/8SB (3.1mm) 8 Resistors Bussed 2512 1206 Model BCN 31 8RBI/8SBI (3.1mm) 8 Resistors Bussed 2512 1206 4/8 Resistors Isolated/Bussed All All Jumper Chip Array Features · · · · · Reliable monolithic construction Nickel barrier terminations Top side marking for easy identification Concave or convex termination styles Square or scalloped edges available Edge Finish / Termination Scalloped Convex Square Convex Square Concave • • • • • • • • • • • • • Benefits · · · · · Saves board space over equivalent rated chip resistors Eliminates up to seven pick & place operations Single component reliability Leadless chip, reduced inductance Mounts close to active devices Applications · · · · Pull up / pull down resistors for digital IC’s Series termination on high speed data busses Current limit for LED displays Available as an 8 bit R/2R Ladder Network General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Electrical Standard Resistance Range, Ohms BCN4D, BCN10, BCN16 4: BCN 16 8R / 8S: BCN 31 8R / 8S: BCN 21: 10 to 1 Megohm 100 to 1 Megohm 22 to 1 Megohm 68 to 220K ±5% (J Tol.) Optional: ±1% (F Tol.), BCN 4D, BCN 16 4, BCN31 8RB / 8SB Only ±2% (G Tol.), BCN 16 4, BCN31 8RB / 8SB Only Standard Resistance Tolerance Operating Voltage, Maximum BCN 4D: BCN 16 4, BCN 31 8R / 8S: BCN 10, BCN 16 8R / 8S, BCN 21: Power Rating, watts at 70°C BCN 4D: BCN 10, BCN 164: BCN 16 8R / 8S: BCN 21, BCN 31 8R / 8S: 75Vdc or √pr 50Vdc or √pr 25Vdc or √pr 125mW per Resistor / 500mW per Package 63mW per Resistor / 250mW per Package 32mW per Resistor / 250mW per Package 63mW per Resistor / 500mW per Package Environmental Test Condition Parts with no TCR code Operating Temperature Range Parts with Z TCR code -55°C to +155°C Temperature Coefficient of Resistance ±200ppm/°C ±100ppm/°C Moisture Resistance 1,000 hours @ +40°C, 95% R.H. 3% +0.1Ω ΔR 1% +0.1Ω ΔR High Temperature Operation 1,000 hours @ 155°C 3% +0.1Ω ΔR 1% +0.1Ω ΔR Short Time Overload 2.5 x rated voltage, 5 seconds 2% +0.1Ω ΔR 0.25% +0.1Ω ΔR Temperature Cycling -55°C to +155°C, 5 cycles 1% +0.1Ω ΔR 1% +0.1Ω ΔR Resistance to Solder Heat 260°C for 10 seconds 1% +0.1Ω ΔR 0.25% +0.1Ω ΔR Load Life 1,000 hours @ 70°C 3% +0.1Ω ΔR 1% +0.1Ω ΔR Construction Passivation: Glass or Resin Conductor Nickel Barrier General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Resistor: Ruthenium Oxide Alumina Substrate 100% Tin BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Electrical BCN 16 8R & BCN 31 8R BCN 06 4, BCN 4D, BCN 10 & BCN 16 4 R1 R2 R3 10 9 8 7 6 1 2 3 4 5 R4 R1 = R2….Rn (n = 2, 4) BCN 16 8S & BCN 31 8S BCN 21 10 9 8 7 6 1 2 3 4 5 Standard Resistance Values, Ohms Model, BCN 4D, BCN 10 & BCN 16 4 Model BCN 16 8R & BCN 16 8S 10 100 1K 10K 100K 1 Meg 220 1K 10K 100K 12 120 1.2K 12K 120K Jumper 330 4.7K 47K 1 Meg 15 150 1.5K 15K 150K 18 180 1.8K 18K 180K 22 220 2.2K 22K 220K 27 270 2.7K 27K 270K 220 33 330 3.3K 33K 330K 330 2.7K 22K 470K 1K 4.7K 47K 1 Meg 39 390 3.9K 39K 390K 47 470 4.7K 47K 470K 56 560 5.6K 56K 560K 68 680 6.8K 68K 680K 82 820 8.2K 82K 820K General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Model BCN 31 8R Model BCN 31 8S 2.2K 10K 100K Model BCN 21 68 330 4.7K 10K 220 1K 47K 100K BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Outline Dimensions (Inch /mm) Exterior Termination (Convex) Square Edge: Models BCN 16 4AB, 31 Scalloped Edge: Models BCNBCN 2D, 4D, 2D, 16 4D,4A 16 L (BCN 4D, BCN 16 4A) L (BCN 31) L (BCN 4D, BCN 10,BCN 16 4A) C C W W B H H P BCN 4D BCN 10 BCN 16 4A/ AB BCN 31 B1 P B L W H P B B1 C .210 ±.008 .122 ±.008 .022 ±.004 .050 ±.008 .030 ±.008 5.34 ±0.20 3.10 ±0.20 0.55±0.10 1.27±0.20 0.80 ±0.20 .079 ±.008 .039 ±.006 .014 ±.004 .020 ±.004 .012 ±.006 .016±.006 .006±.002 2.00 ±0.20 1.00 ±0.15 0.36 ±0.10 0.50 ±0.10 0.30 ±0.15 0.40 ±0.15 0.15 ±0.05 .126 ±.004 .063 ±.004 .020 ±.004 .031 ±.002 .020 ±.004 .012 ±.008 - 0.30 ±0.20 .009 ±.005 - 3.20 ±0.10 1.60 ±0.10 0.50 ±0.10 0.80 ±0.05 0.50 ±0.10 .252 ±.008 .122+.012,-.008 .022 ±.004 .050 ±.002 .032 ±.004 .041±.004 0.229 ±0.125 .012 ±.004 6.40 ±0.20 3.1 +0.3, -0.2 0.55 ±0.10 1.27 ±0.051 0.80 ±0.10 1.05±0.10 0.30 ±0.10 Interior Termination (Concave) Square Edge: Models BCN 4 DBI, 16 4ABI, 31 C1 L H C C P B L W H P B C .210 ±.008 .122 ±.008 .022 ±.004 .050 ±.008 .030 ±.008 .012 ±.008 BCN 4 DBI 5.34 ±0.20 3.10 ±0.20 0.55 ±0.10 1.27 ±0.20 0.80 ±0.20 0.30 ±0.20 BCN 16 4ABI .126 ±.008 .063 ±.006 .024 ±.004 .031 ±.004 .016 ±.006 .012 ±.008 .012 ±.008 3.20 ±0.20 1.60 ±0.15 0.60 ±0.10 0.80 ±0.10 0.40 ±0.15 0.30 ±0.20 0.30 ±0.20 .252 ±.008 .122 ±.008 .024 ±.004 .050 .028 ±.008 .012 .012 6.40 ±0.20 3.10 ±0.20 0.60 ±0.10 1.27 0.70 ±0.20 0.30 BCN 31 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. C1 - +.008 -.004 0.30 +.02 -.01 BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Outline Dimensions (Inch /mm) Exterior Termination (Convex) Square Edge: Models BCN 16 8R, 8S T L B1 A W C P B2 L W T A B1 B2 C P .126 ±.008 .063 ±.008 .020 ±.004 .012 ±.006 .014 ±.006 .020 ±.006 .008 .025 3.20 ±0.20 1.60 ±0.20 0.50 ±0.10 0.30 ±0.15 0.36 ±0.15 0.50 ±0.15 0.20 0.64 Interior Termination (Concave) Square Edge: Models BCN 21 L T W C B P A D C1 B1 A1 L W E T D1 A B C D .157 ±.008 .083 ±.008 .021 ±.004 .020 ±.008 .010 ±.008 .020 ±.008 .012 ±.008 4.00 ±0.20 2.10 ±0.20 0.55 ±0.10 0.50 ±0.20 0.25 ±0.20 0.50 ±0.20 0.30 ±0.20 A1 B1 C1 D1 .016 ±.008 .014 ±.008 .020 ±.008 .014 ±.008 0.40 ±0.20 0.40 ±0.20 0.50 ±0.20 0.35 ±0.20 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. E P .012 Typ. 0.30 .032 Typ. 0.80 BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Solder pad layout (Inch / mm) BCN 31 Only BCN 16 4AB, 4ABI Y A B Y C X P Wave Solder Process BCN 4D/4DBI BCN 16 4A, AB, ABI BCN 31 8R, 8S Re-flow Solder Process P A B C X Y A B C X Y .050 .087 .169 .022 .028 .041 .087 .154 .022 .028 .034 1.27 2.20 4.30 0.57 0.70 1.05 2.20 3.90 0.57 0.70 0.85 .032 .039 .118 .014 .018 .039 .039 .118 .014 .018 .039 0.80 1.00 3.00 0.35 0.45 1.00 1.00 3.00 0.35 0.45 1.00 .050 .084 .148 .014 .036 .032 .084 .148 .014 .036 .032 1.27 2.10 3.70 0.35 0.90 0.80 2.10 3.70 0.35 0.90 0.80 BCN 16 8RB / 8SB Y P A B Y X1 X Wave Solder Process BCN 16 8RB / 8SB Re-flow Solder Process P A B X X1 Y A B X X1 Y .025 .048 .096 .012 .018 .024 .048 .096 .012 .018 .024 0.64 1.20 2.40 0.30 0.45 0.60 1.20 2.40 0.30 0.45 0.60 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Solder pad layout (Inch / mm) BCN 10 L Y P A P1 B X BCN 10 X1 P P1 A B X X1 Y L .024 .020 .020 ±.004 .060 ±.004 010 ±.004 .018 ±.004 .020 ±.004 .085 ±.004 0.60 0.50 0.50 ±0.10 1.50 ±0.10 0.25 ±0.15 0.45 ±0.10 0.50 ±0.10 2.15 ±0.10 BCN 21 L W1 C W2 A B W3 Y W P X BCN 21 P A B C X Y W W1 W2 W3 L .032 .060 ±.008 .120 ±.008 .016 ±.004 .016 ±.004 .030 ±.004 .012 ±.001 .015 ±.004 .030 ±.004 .030 ±.004 .196 ±.008 0.80 1.20 ±0.20 3.00 ±0.20 0.40 ±0.10 0.40 ±0.10 0.75 ±0.10 0.31 ±0.02 0.38 ±0.10 0.75 ±0.10 0.75 ±0.10 4.98 ±0.20 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Ordering Information 4 BCN D B I 102 J 7 S Model Series Construction Option: No code = Standard product S = Sulphur resistant - only No. of Resistors: on BCN4DxxxJ7 BCN 4D = 4 Resistors Packaging Option: 7” or 13” (See Table A) Circuit Configuration: D = Isolated Tolerance: ±5% Resistance Code Edge Option (B = Square Edge): Termination Code: BCN 4D: Scalloped Edge Only - No Code Used I = Interior (Concave) Termination (Only available in BCN 4 DBI) BCN 16 4 A B I Z Model Series 102 J 7 S Construction Option: No code = Standard product Width: 10 = 1.0mm S = Sulphur resistant - only on BCN 104/164/168RB 16 = 1.6mm 21 = 2.1mm 31 = 3.1mm Packaging Option: 7” or 13” (See Table A) Tolerance: No. of Resistors: BCN 10 / 06 4 / 16 4 = 4 Resistors BCN 16 8R / 16 8S = 8 Resistors BCN 21 / 31 8R / 31 8S = 8 Resistors Circuit Configuration: A = Isolated (BCN 10 / 16 4A) R = Bussed (Reversed) (BCN 16 8R / 31 8R) S = Bussed (Standard) (BCN 21 / 16 8S / 31 8S) Edge Option (B = Square Edge): Scalloped Edge - No Code Used (Standard) Square Edge Only - Use Code ‘B’ F = ±1% (BCN 4D / 16 4 / 31 8RB / 31 8SB) G = ±2% (BCN 16 4, 31 8RB / 8SB Only) J = ±5% (Standard) (Use JP for Jumper Chip Array - BCN 16 4 / 31) Resistance Code: 3 digits for all E24 values in 2% or 5% tolerance 4 digits for uniquely E96 values in any tolerances and for any value in 1% tolerance TCR Code: No code = ±200ppm/°C (standard) Z = ±100ppm/°C (BCN164 only) Termination Code: I = Interior (Concave) Termination No code used for exterior termination ( Standard) All interior termination requires ‘B’ for square edge See ‘Model Styles’ for Available Options General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. (BCN 16 4ABI / 31 8RBI / 31 8SBI) BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18 Thick Film Chip Arrays BCN Series Packaging (Table A) 7” Reel Diameter Paper BCN 4D 13” Reel Diameter Embossed Paper 4K Embossed 16K BCN 10 10K 40K BCN 16 4 5K 20K BCN 16 8 5K 20K BCN 21 4K 16K BCN 31 4K 16K Note: Tape & Reel dimensions per EIA-481. Sulphur Resistant Arrays · · · · · Special construction resists sulphide growth Withstands sulphur bearing fume environment Tested to ASTM-B809 (“Flowers-of-Sulphur”) Suitable for industrial, automotive and roadside uses RoHS compliant matt Tin finish terminations General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Performance Data Hydrogen Sulphide exposure: · · 1000 Hours, 3-5ppm H2S, 50°C, 92%RH 0.5% Max ΔR and no visual defects BI Technologies IRC Welwyn www.ttelectronics.com/resistors © TT Electronics plc 02.18