VAISH MDRC1641500JE04 Resistor/capacitor networks, dual-in-line, molded dip, 16 pin Datasheet

MDRC
Vishay Dale
Resistor/Capacitor Networks, Dual-In-Line,
Molded DIP, 16 Pin
FEATURES
•
•
•
•
•
0.190" [4.83 mm] maximum seated height
Rugged molded case construction
Thick film resistive elements
Reduces total assembly cost
Low temperature coefficient (- 30 °C to + 85 °C)
± 100 ppm/°C
• Compatible with automatic insertion equipment
• Reduces PC board space
• Lead (Pb)-free version is RoHS compliant
Available
e1
RoHS*
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
POWER
RATING
P25 °C
W
GLOBAL
SCHEMATIC
MODEL
RESISTOR CHARACTERISTICS
CAPACITOR CHARACTERISTICS
TEMPERATURE
PACKAGE
TCR
RESISTANCE
COEFFICIENT
POWER
TRACKING
TOLERANCE
(- 20 °C to + 85 °C)
RATING
± ppm/°C
±%
Typical
W at + 25 °C
CAPACITOR
TOLERANCE
CAPACITANCE
VOLTAGE
RATING
V max.
MDRC
1641
0.15 max
2.0 max.
± 2, or 2 Ω*
± 100 ppm/°C
50
0.1 µF + 40 %, - 20 %
25
MDRC
1642
0.15 max
2.0 max.
± 2, or 2 Ω*
± 100 ppm/°C
50
0.1 µF + 40 %, - 20 %
25
MDRC
1643
0.20 max
2.0 max.
± 2, or 2 Ω*
± 100 ppm/°C
50
0.1 µF + 40 %, - 20 %
25
* Whichever is greater
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MDRC1641500GD04 (preferred part numbering format)
M
GLOBAL
MODEL
MDRC
D
R
PIN
COUNT
16 = 16 Pin
C
1
6
4
1
5
0
0
G
RESISTANCE
TOLERANCE
VALUE
CODE
41 = ECL Terminator
2 digit
G=±2%
42 = ECL Pull-Down
significant figure,
S = Special
00 = Special
followed by a
multiplier
680 = 68 Ω
511 = 510 Ω
Historical Part Number example: MDRC1641500G (will continue to be accepted)
D
0
SCHEMATIC
4
PACKAGING
SPECIAL
E04 = Lead (Pb)-free,
Tube
D04 = Tin/lead, Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
MDRC
16
41
500
G
D04
HISTORICAL
MODEL
PIN
COUNT
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CODE
PACKAGING
New Global Part Numbering: MDRC1643750GD04 (preferred part numbering format)
M
GLOBAL
MODEL
MDRC
D
PIN
COUNT
16 = 16 Pin
R
C
1
SCHEMATIC
43 = Thevenin
Terminator
6
4
3
7
5
IMPEDENCE
VALUE
2 digit
significant figure,
followed by a
multiplier
500 = 50 Ω
0
G
TOLERANCE
CODE
G=±2%
J=±5%
D
0
4
PACKAGING
SPECIAL
E04 = Lead (Pb)-free,
Tube
D04 = Tin/lead, Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
Historical Part Number example: MDRC1643750G (will continue to be accepted)
MDRC
16
43
750
G
D04
HISTORICAL
MODEL
PIN
COUNT
SCHEMATIC
IMPEDENCE
VALUE
TOLERANCE
CODE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
62
For technical questions, contact: [email protected]
Document Number: 31524
Revision: 09-Jan-07
MDRC
Resistor/Capacitor Networks, Dual-In-Line,
Molded DIP, 16 Pin
Vishay Dale
DIMENSIONS in inches [millimeters]
0.310 ± 0.010
[7.87 ± 0.254]
0.850 ± 0.010
[21.59 ± 0.254]
0.150 ± 0.005
[3.81 ± 0.127]
0.030
[0.762] Typ.
0.075 ± 0.015
[1.90 ± 0.381]
Pin #1
Identification
0.130 + 0.015
- 0.010
[3.30 + 0.381
- 0.254]
0.018 ± 0.003
[0.457 ± 0.076]
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative Tol.
7 Spaces
Pin #1
0.700 ± 0.010
[17.78 ± 0.254]
0.250 ± 0.005
[6.35 ± 0.127]
0.010 + 0.005
- 0.002
[0.254 + 0.127
- 0.051]
0.290 [7.37] Min.
0.320 [8.13] Nom.
0.360 [9.14] Max.
0.050 ± 0.005
[1.27 ± 0.127]
RESISTANCE VALUE IN OHMS (G TOLERANCE)
MDRC1643
MDRC1641
50, 68, 75, 100
MDRC1642
510
R1
R2
Zo
81
130
50
121
195
75
162
260
100
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
MDRC
VAC
50 maximum
%
<3
ppm/V
< 50
Operating Temperature Range
°C
- 30 to + 85 °C
Storage Temperature Range
°C
- 30 to + 85 °C
Operating Voltage (at + 25 °C)
Capacitor Dissipation Factor
Voltage Coefficient of Resistance (typical)
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Solderability
Terminals
Body
Weight
Document Number: 31524
Revision: 09-Jan-07
Permanency testing per MIL-STD-202, Method 215
Per MIL-STD-202, Method 208E
Copper alloy, solder plated
Molded epoxy
1.5 grams
For technical questions, contact: [email protected]
www.vishay.com
63
MDRC
Resistor/Capacitor Networks, Dual-In-Line,
Molded DIP, 16 Pin
Vishay Dale
CIRCUIT APPLICATIONS
MDRC1641 Schematic
- 2.0 and - 5.2 Volt ECL Terminator
16
9
1
8
The MDRC1641 circuit contains 11 resistors of nominally equal value and a
0.01 microfarad decoupling capacitor. The MDRC-1641 is designed for ECL Line
Termination to a - 2.0 volt buss. The 0.01 microfarad decoupling capacitor is for
bypassing transients between supply voltages.
MDRC1642 Schematic
16
9
1
8
The MDRC1642 circuit contains 12 resistors of 510 ohm each and a
0.01 microfarad decoupling capacitor. The MDRC-1642 is designed for ECL
Pull-down to a - 5.2 volt buss. The 0.01 microfarad decoupling capacitor is for
bypassing voltage transients on the voltage buss.
MDRC1641 Schematic
VCC
LINE 1
VEE
LINE 2
LINE 3
VCC
Thevenin Equivalent Terminator
VEE
LINE 2
The MDRC1643 contains four pair of series resistors. The circuit is compatible
with ECL pin configurations. Each terminator section (series pair) contains a
voltage divider between VCC (0 volt) and VEE (- 5.2 volt) providing a Thevenin
equivalent voltage of - 2.0 volts. A 0.01 microfarad decoupling capacitor
bypasses the VEE buss.
16
R1
1
VCC
R1
R2
VEE
R2
VCC
VEE
R1
R1
R2
R2
VEE
VCC
VEE
C
VEE
Power Rating (Watts)
MDRC1641 and MDRC1642
MDRC1641
MDRC1642
Package
2.00
1.00
0.15
Single Resistor
- 50 - 30
+ 25
+ 85
+ 150
Ambient Temperature °C
Derating
Power Rating (Watts)
MDRC1643
MDRC1643
Package
2.00
1.00
0.20
- 50 - 30
Derating
www.vishay.com
64
Single
Resistor
+ 25
+ 85
+ 150
Ambient Temperature °C
For technical questions, contact: [email protected]
Document Number: 31524
Revision: 09-Jan-07
MDRC
Resistor/Capacitor Networks, Dual-In-Line,
Molded DIP, 16 Pin
Vishay Dale
PERFORMANCE
MAX ΔR
(Typical Test Lots)
TEST
CONDITIONS
Thermal Shock
MDRC1641 and MDRC1642, 5 cycles between - 30 °C and + 85 °C
MDRC1643, 5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
Short Time Overload
2.5 x rated working voltage 5 seconds
± 0.25 % ΔR
Low Temperature Operation
MDRC1641 and MDRC1642, 45 minutes at full rated working voltage at - 30 °C
MDRC1643, 45 minutes at full rated working voltage at - 65 °C
± 0.25 % ΔR
Moisture Resistance
240 hours with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Resistance to Soldering Heat
Leads immersed in + 350 °C solder to within 1/16" of device body for 3 seconds
± 0.25 % ΔR
Shock
Total of 18 shocks at 100 G's
± 0.25 % ΔR
Vibration
12 hours at maximum of 20 G's between 10 and 2000 Hz
± 0.25 % ΔR
Load Life
1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full
1000 hour period. Derated according to the curve.
± 0.50 % ΔR
Terminal Strength
4.5 pound pull for 30 seconds
± 0.25 % ΔR
Insulation Resistance
10 000 Megohm (minimum)
-
Dielectric Withstanding Voltage
(200 VRMS for 1 minute)
-
Document Number: 31524
Revision: 09-Jan-07
For technical questions, contact: [email protected]shay.com
www.vishay.com
65
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Similar pages