APDS-9102 Integrated Reflective Sensor Data Sheet Description Features APDS-9102 is a low cost, fast switching speed reflective proximity sensor that incorporates an infrared LED and a phototransistor in a single integrated package. APDS9102 supports the detection distance of near 0 to approx 8mm, enabling to support a wide range of applications. • Detection distance of near 0mm to 8mm Application Support Information Depth – 17.8 mm • Operating temperature : -35˚C to 65˚C The Application Engineering Group is available to assist you with the application design associated with APDS9102. You can contact them through your local sales representatives for additional details Ordering Information Part Number Package Quantity APDS-9102-L22 4 pin leads 1600 • Fast Switching Speed • Package size Height – 15.2 mm Width – 5 mm • Lead-free and RoHS Compliant Applications APDS-9102 is widely suitable to provide reflective object or proximity sensing suitable for various applications in industrial, office automation and consumer markets. • Industrial – Automatic vending machines, amusement/ gaming machines, coin/bill validators etc • Office automation – Printers, Copiers etc • Consumer – Coffee machines, beverage dispensing machines etc Absolute Maximum Ratings (Ta=25˚C) Parameter Symbol Max Rating Unit Power Dissipation [1] PD 75 mW Peak Forward Current ( 300pps, 10 μs pulse) ICP 3 A Continuous Forward Current IF 50 mA Reverse Voltage VR 5 V Power Dissipation [1] Pc 100 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 5 V Collector Current IC 20 mA Operating Temperature Range TOP -35˚C to +65˚C Storage Temperature Range TSTG -40˚C to +100˚C Lead Soldering Termperature (1.6mm(0.063 ” ) From Case) TS 260˚C for 5 seconds Infrared Diode Phototransistor Note: 1. Derate Linearly 1.33mW/ ˚C from 25˚C Electrical / Optical Characteristics (Ta=25˚C) Parameter Symbol Min. Typ. Max. Unit Test Condition 1.2 1.6 V IF=20mA 100 μA VR= 5V Input Diode Forward Voltage VF Reverse Current IR Output Phototransistor Collector-Emitter Breakdown Voltage V(BR)CEO 30 V IC= 1mA Emitter-Collector Breakdown Voltage V(BR)ECO 5 V IE= 0.1mA Collector-Emitter Dark Current ICEO 100 nA VCE= 10V Collector-Emitter Saturation Voltage VCE(SAT) 0.4 V IC= 0.08mA, IF= 20mA On State Collector Current [2] IC(ON) mA VCE= 5V, IF= 20mA Coupler 0.16 Note: 2. Reflective surface is Eastman Kodak(or equivalent) neutral white paper with 90% diffused reflectance placed at 3.81mm(0.15”) from read head. APDS-9102 Package Outline APDS-9102 Block Diagram Pin 1 Pin 3 Pin 2 Pin 4 Test Circuit for Response Time NOTES: 1. All dimensions are in millimeters(inches) 2. Tolerance is ± 0.25mm(0.010”) unless otherwise noted 3. Specifications are subjected to change specifications without prior notice. Input Vcc RD RL Output I/O Pins Configuration Table The electrical pin assignments are depicted in the below table. Pin Function Description 1 Anode LED Anode 2 Cathode LED Cathode 3 Emitter Phototransistor Emitter 4 Collector Phototransistor Collector Input Output 90% 10% GND tr td tf ts APDS-9102 Performance Charts Typical Electrical/Optical Characteristics Curves (Ta=25˚C unless otherwise indicated) Figure 1. Power Dissipation vs. Ambient Temperature Figure 2. Forward Current vs. Forward Voltage Figure 3. Collector Current vs. Collector-emitter Voltage Figure 4. Collector Current vs. Ambient Temperature Figure 5. Collector-emitter Saturation Voltage vs. Ambient Temperature For product information and a complete list of distributors, please go to our web site: Figure 6. Response Time vs. Load Resistance www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. AV02-0030EN - January 23, 2007