IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Features Description High radiant intensity The IR300N-F0 is a GaAlAs infrared LED diode. Viewing Angle = 250 High reliability Good spectral matching to Si photo detector RoHS compliance The device has a peak wavelength of 940nm LED spectrally matched with phototransistor or photodiode. Applications Infrared sensor Remote control Package Outline Anode CT Micro Proprietary & Confidential Schematic Cathode Page 1 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Absolute Maximum Rating at 250C Symbol Parameters Ratings Units IF Continuous Forward Current 100 mA IFP Peak Forward Current 1.0 A VR Reverse Voltage 5 V Topr Operating Temperature -40 ~ +85 0C Tstg Storage Temperature -40 ~ +100 0C Tsol Soldering Temperature 260 0C PD Power Dissipation at(or below) 25℃Free Air Temperature 180 mW Notes 1 2 Electro-Optical Characteristics TA = 25°C (unless otherwise specified) Optical Characteristics Symbol Ie Parameters Test Conditions Min Typ Max IF=20mA 4.0 7.0 20 Radiant Intensity Units 3 mW/sr IF =100mA, Tp=20ms - 32 - λp Peak Wavelength IF=20mA - 940 - nm Δλ Spectral Bandwidth IF=20mA - 50 - nm Angle of Half Intensity IF=20mA - 25 - deg Test Conditions Min Typ Max Units IF=20mA 1.1 1.2 1.5 IF =100mA, Tp=20ms 1.2 1.39 1.8 VR=5V - - 10 θ1/2 Notes Electrical Characteristics Symbol VF IR Parameters Forward Voltage Notes V Reverse Current μA Notes: 1 : IFP Conditions--Pulse Width≦ 100μs and Duty≦ 1%. 2 : Soldering time≦ 5 seconds. 3.: Ie Bin Rank : Bin Code G H I Min 4.0 6.5 10 Max 8.0 13 20 CT Micro Proprietary & Confidential Page 2 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Typical Characteristic Curves CT Micro Proprietary & Confidential Page 3 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Typical Characteristic Curves CT Micro Proprietary & Confidential Page 4 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Package Dimension All dimensions are in mm, unless otherwise stated. CT Micro Proprietary & Confidential Page 5 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Ordering Information IR300N-F0/(XX)(YYY) XX = TR – Tape & Reel / TB – Tape & Box YYY = H; H- Refer to Tape dimension drawing (255 = 25.5mm) Part Number Description Quantity 1 Bag 500 pcs 1 Box 10 bag 1 Carton 8 box IR300N-F0/TR(H) 1 Reel 1000 pcs Tape & Reel 1 Carton 8 box IR300N-F0/TB(H) 1 Box 2000pcs Tape & Box 1 Carton 8 box IR300N-F0 CT Micro Proprietary & Confidential Page 6 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter Tape Dimension All dimensions are in mm, unless otherwise stated. CT Micro Proprietary & Confidential Page 7 Rev 1 May, 2014 IR300N-F0 3mm Lamp Type 940nm Infrared Emitter DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. ______________________________________________________________________________________ CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical support device or system whose failure to perform implant into the body, or (b) support or sustain life, can be reasonably expected to cause the failure of or (c) whose failure to perform when properly used the life support device or system, or to affect its in accordance with instruction for use provided in safety or effectiveness. the labelling, can be reasonably expected to result in significant injury to the user. CT Micro Proprietary & Confidential Page 8 Rev 1 May, 2014