ECCBRABS2-6 ~ECCBRABS10-6 1.0A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers-200-1000V Features ◆ Glass passivated junction ◆ Ideal for printed circuit board ◆ Reliable low cost construction utilizing molded plastic technique ◆ High temperature soldering guaranteed: 260°C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆ High surge current capability ◆ Suffix "-H" indicates Halogen-free part, ex.ECCBRABS2-6-H. Mechanical Data ◆ Epoxy:UL94-V0 rated flame retardant ◆ Case : Molded plastic, LMDS ◆ Terminals : Solder plated, solderable per MIL-STD-202, Method 208 ◆ Polarity : marked on body ◆ Mounting Position : Any ◆ Weight : Approximated 0.0992 gram Maximum ratings and Electrical Characteristics (At TA=25 PARAMETER ℃ unless otherwise noted) SYMBOLS ABS2-6 ABS4-6 ABS6-6 ABS8-6 ABS10-6 UNITS Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Maximum RMS voltage VRMS 140 280 420 560 700 V Maximum DC blocking voltage VDC 200 400 600 800 1000 V Maximum average forward rectified current On aluminum substrate Peak forward surge current 8.3 ms single half sine-wave (JEDECMethod) Maximum instantaneous forward voltage at IF=1.0A Rating for fusingt < 8.3 ms Maximum DC reverse current At rated DC blocking voltage IO 1.0 A IFSM 30 A VF 1.1 V 2 3.7 A2s It TJ=25℃ TJ=125℃ 5.0 IR 500 uA Typical thermal resistance junction to ambient RθJA 80 Typical thermal resistance junction to lead RθJL 25 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Operating junction temperature range Storage temperature range E-CMOS Corp. (www.ecmos.com.tw) Page 1 of 4 ℃/W 5E05N-Rev. F001 1.0A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers-200-1000V ECCBRABS2-6 ~ECCBRABS10-6 Rating and characteristic curves E-CMOS Corp. (www.ecmos.com.tw) Page 2 of 4 5E05N-Rev. F001 1.0A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers-200-1000V ECCBRABS2-6 ~ECCBRABS10-6 Pinning information Marking Part No Marking ECCBRABS2-6 / ECCBRABS2-6-H ABS2 ECCBRABS4-6 / ECCBRABS4-6-H ABS4 ECCBRABS6-6 / ECCBRABS6-6-H ABS6 ECCBRABS8-6 / ECCBRABS8-6-H ABS8 ABS10 ECCBRABS10-6 / ECCBRABS10-6-H Suggested solder pad layout PACKAGE LMDS E-CMOS Corp. (www.ecmos.com.tw) A 0.032 (0.80) B C D 0.032 (0.80) 0.132 (3.35) 0.193 (4.90) Page 3 of 4 5E05N-Rev. F001 1.0A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers-200-1000V ECCBRABS2-6 ~ECCBRABS10-6 Packing information Reel packing E-CMOS Corp. (www.ecmos.com.tw) Page 4 of 4 5E05N-Rev. F001