SAMTEC ASP-129637-01 342 stacker height not available as standar Datasheet

REVISION A
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1. .342 STACKER HEIGHT NOT AVAILABLE AS STANDARD.
2. C REPRESENTS A CRITICAL DIMENSION.
3. BURR ALLOWANCE: .0015[0.038] MAX.
4. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB.
5. MAX VARIANCE OF .002[0.05].
6. DIMENSION APPLIES TO CONTACTS & GROUND PLANES.
7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINAL.
8. PARTS TO BE PACKAGED IN TRAYS.
C1
.835 21.21
(((26 POS/ 26) x .840[21.34]) - .005[0.13])
.090 2.29
REF
C2
.625 15.88
25 EQ SPACES @ .0250[.635]
01
ACCEPTANCE OF DRAWING
ACCEPTED WITH DEVIATIONS LISTED
.286 7.26
REF
02
5
.295±.020 7.48±0.51
.009 0.23 REF
.216 5.49
REF
.835 21.21 REF
"A"
1
.035±.020 0.89±0.51
.212 5.38
REF
2
"A"
.035 0.89
REF
FAX No:
PHONE No:
PRINTED NAME
CUSTOMER SIGNATURE
COMPANY:
DATE:
.105 2.67 REF
.735 18.67
ITEM NO.
PART NUMBER
QUANTITY
MATERIAL
1
QMSS-26-05.75-D-01
1.0000
VECTRA E130i, COLOR: BLACK
2
ASP-129634-01-B
1.0000
VECTRA E130i, COLOR: BLACK
3
ASP-129635-02-P-S
52.000
PHOS BRONZE, 521 EXTRA SPRING TEMPER
4
ASP-129636-02-P-L
1.0000
PHOS BRONZE, 510 FULL HARD TEMPER
5
K-500-300
1.0000
POLYAMIDE FILM (KAPTON)
6
TY-ASP-088
.01786
ANTI-STATIC BLACK HIPS
POLARIZATION
NOTCHES
.040 1.02 REF
(TYP)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
2
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: [email protected]
code: 55322
DESCRIPTION:
ELEVATED QMS ASSM
PLATING:
CONTACT AREA: .000030 GOLD OVER .000050 NICKEL
REMAINDER: .000200 REF TIN OVER .000050 NICKEL
DWG. NO.
c:\enterprisevault\DWG\MISC\MKTG\ASP-129637-01-MKT.SLDDRW
BY: CLAY W
ASP-129637-01
12/12/2006 SHEET 1 OF 2
ASP-129637-01
RECOMMENDED PCB LAYOUT
REVISION A
.735 18.67
.025 0.64 (TYP)
.016 0.41
02
.046 1.17 NPTH
(TYP 2 PLCS)
.075 1.91
.320 8.13
.020 0.51
.055 1.40
01
CL
.625 15.88
.680 17.27
(ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE)
IN-PROCESS
.010 0.25 REF
C4
+.0040
+0.10
.1150 - .0010 2.921 - 0.03
(MEASURED TERMINAL
TO TERMINAL)
C5
+.0040
+0.10
.3420 - .0020 8.688 - 0.05
(SEE NOTE 5)
C5
C6
+.0040
+0.10
.3420 - .0020 8.688 - 0.05
(SEE NOTES 5, 6, & 7)
.347±.004 8.81±0.10
.004[0.10]
C6
.004[0.10]
(SEE NOTE 6)
3
.022 0.56 REF
4
.296±.006 7.52±0.15
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
SHEET SCALE: 5:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: [email protected]
code: 55322
DESCRIPTION:
DWG. NO.
SECTION "A"-"A"
SCALE 5 : 1
ELEVATED QMS ASSM
ASP-129637-01
BY: CLAY W
c:\enterprisevault\DWG\MISC\MKTG\ASP-129637-01-MKT.SLDDRW
12/12/2006
SHEET 2 OF 2
Similar pages