GOOD-ARK HER1002 High efficiency rectifier Datasheet

HER1001 THRU HER1007
HIGH EFFICIENCY RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
1.0 ampere operation at TA=55 with no thermal runway
Low cost
Ultrafast recovery time for high efficiency
Low forward voltage
Low leakage current
High surge current capability
High temperature soldering guaranteed:
250 /10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3Kg) tension.
Mechanical Data
DIM ENSIONS
Case: DO-41 molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.33 gram
inches
DIM
mm
Min.
Max.
Min.
Max.
A
0.165
0.205
4.2
5.2
B
0.079
0.106
2.0
2.7
C
0.028
0.034
0.71
0.86
D
1.000
-
25.40
-
Note
Maximum Ratings and Electrical Characteristics
Ratings at 25
ambient temperature unless otherwise specified.
Symbols
HER
1001
HER
1002
HER
1003
HER
1004
HER
1005
HER
1006
HER
1007
Units
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55
I(AV)
1.0
Amp
Peak forward surge current,
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM
30.0
Amps
Maximum instantaneous forward voltage at 1.0A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=100
IR
Maximum reverse recovery time (Note 1)
Trr
CJ
Operating junction and storage temperature range
1.7
10.0
50.0
Typical junction capacitance (Note 2)
Typical thermal resistance (Note 3)
1.0
R
R
50.0
JL
TJ, TSTG
nS
17.0
F
60.0
15.0
/W
-55 to +150
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient and from junction to lead length 0.375” (9.5mm), P.C.B. mounted
1
A
100.0
JA
Volts
RATINGS AND CHARACTERISTIC CURVES
2
Similar pages