BTCPOWER HB75D-48-0525P Dual output 15/15a half brick Datasheet

BTCPower
TM
Broadband TelCom Power, Inc.
HB75D Series
Redefining “Current” Limits In Power Conversion
Dual Output 15/15A Half Bricks
Description
The HB75D series of low cost DC/DC converters offer the
different current levels and are comparable to existing
quarter-bricks. With a wide input voltage range of 18-36V or
36-75V they are available with Dual output voltages of either
5.0/3.3 or 5.0/2.5 Volts. All models feature an input filter,
output overvoltage and overtemperature protection, output
current limiting and short circuit protection. The unique frame
construction with aluminum heat spreader design achieves
efficient heat transfer with no hot spots. The use of patented
Flat Matrix Transformer technology and other patent-pending
design concepts facilitate maximum power delivered. The
converters combine creative design concepts with highly
derated power devices to achieve very high reliability, high
performance and offer a low cost solution to systems
designers that are challenged to maximize power and
minimize board space.
Features
•
•
•
•
•
•
•
•
Delivers up to 15/15A in Half Brick
High efficiency patented topology
Low profile of only 0.50 inch
5.0/3.3 and 5.0/2.5 output modules
100V/100ms Input transient capability
-40°C to +85 °C ambient operation
Meets Basic Insulation requirements of EN60950
UL 1950 recognized, CAN / CSA C22.2 No. 950-95
Certified, and TUV EN60950 ( pending )
• Meets conducted limits of FCC Class B and CEI
IEC61204-3 Class B with external filter
Specification Summary
• 5.0V/15A + 3.3V/15A, 5.0V/15A + 2.5V15A
• Tight output regulation, typical ±2%
• No minimum load required
• Ripple & Noise (20Mhz BW) 100 mV (pk-pk)
or 2% (pk-pk)
• Wide input operating range 18-36V or 36-75V
• On/Off pin and remote sense
• Output adjustment +/-10% range
• 1500V, 10M
Applications
•
•
•
•
•
•
•
Telecommunications
Data Communications
Wireless Communications
Networking Gear
Servers, Switches and Data Storage
Semiconductor Test Equipment
Distributed Power Architecture
input-to-output isolation
• Frame construction with heat spreader for low
temperature rise
• Output overcurrent and overvoltage protection
• Over Temperature protection
• Input Under voltage protection
• MTBF of 1,600,000 hours @ 50°C ( Bellcore )
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: [email protected] PB HB75D Rev2 16-1-04
HB75D Series
BTCPower
Dual output Half Bricks
TM
Product Brief
Part Number and Selection Information
Model
Input
Part Number
Positive Logic
Negative Logic
Voltage (Volts)
Output
Current (A)
Efficiency
Voltage
Current
75% Load
Nominal
Range
No load
Full load
(Volts)
(Amps)
(%)
HB75D-24-0533P
HB75D-24-0525P
HB75D-48-0533P
HB75D-24-0533N
HB75D-24-0525N
HB75D-48-0533N
24
24
48
18-36
18-36
36-75
0.1
0.1
0.1
6.25
5.64
3.10
5.0/3.3
5.0/2.5
5.0/3.3
15/15
15/15
15/15
83
83
84
HB75D-48-0525P
HB75D-48-0525N
48
36-75
0.1
2.79
5.0/2.5
15/15
84
Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted.
Consult factory for other output voltage configurations and optional accessories such as heatsinks and filters.
Outline Information and Pin-out
Pin Connection
Pin#
Function
1
2
Vin +
On/Off
3
Case
4
Vin -
5
6
7
8
9
10
Vout 2 +
Vout 2 Vout 2 Trim
Vout 1 +
Vout 1 Vout 1Trim
All dimensions are in inches [mm]
All other pins are all dia. 0.040 [1.02]
Pin material: Brass
Pin finish: Tin/Lead plated
Heat spreader (baseplate) material:
Aluminum
Weight: 60.5g
The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are
subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Broadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.
Tel.: 714-259-4888 • Fax: 714-259-0840 • www.btcpower.com • Email: [email protected] PB HB75D Rev2 16-1-04
Similar pages