FAB0801004 FEATURES 160 x 110 x 40 mm INPUT : 18-36Vdc according to DO160D OUTPUT : 4 outputs Efficiency : 85 % Conduction cooled Pout Max : 295W APPLICATIONS Avionic and hard environment. INPUT Voltage range : 18-36Vdc Input protection : transient and surges protected inrush current limitation reverse polarity protection OUTPUT ITEMS Nominal Output Voltage Minimum Output Current Maximum Output Current Nominal Output Power Total Output Power Input Voltage Range Input Current Hold-up Time Output Voltage Accuracy Max line regulation Max load regulation Over Current Protection Efficiency Remote sensing Remote ON/OFF Control Powergood (led) Operating Temperature Storage Temperature Cooling Rev. 02 Size (W-H-D) V A A W W V A ms A mm +5V +5 0 25 125 +3V3 +3,3 0 15 49,5 +12V +12 0 9 108 -12V -12 0 1 12 295 18-36Vdc (in accordance with Cat A DO160D sec, 16&17) 20/10 50 (Pout 70W) / 35 (Pout 100W) +-1% +-2% +-5% +-5% +/-2% +-1% +-2% +-5% +-2% 40 20 11 3 85% Yes Yes No No ON when On/Off pin is connected to 0Vin 5V/15mA output for Led -40 +65°C -40 +85°C (in accordance with Cat A1 DO160 sec, 4) Conduction cooled 1/3 160x110x40 FAB0801004 SIGNALS / OPTION Powergood : by led On/Off contact : ON when shorted External hold-up capacity : used with FAB0903003 (200ms at 70W) ENVIRONMENTAL Storage temperature : -40°C to +85°C according to DO160D cat. A1 sec.4 Operating temperature : -40°C to +85°C max. baseplate Humidity : protected by conformal coating Vibration : ruggedized by glue ISOLATION Input to chassis : 1500 Vrms or 2120Vdc Input to Output : 1500 Vdc Output to chassis : 100 mohms / 500Vdc GENERAL Safety : built to meet EN60950 EMI : built to meet DO160D Rev. 02 2/3 FAB0801004 MECHANICALS INPUT and OUTPUT +VIn, -VIn, Earth +5V, +3V3, 0V +12V, -12V, PGood, Senses On/Off Auxiliary caps Rev. 02 3/3 3 x M4 studs terminals 4 x M4 studs terminals MOLEX Minifit 10pts MOLEX Minifit 2pts MOLEX Minifit 4pts