MIC DB102S Surface mount bridge Datasheet

SURFACE MOUNT BRIDGE
DB101S THRU DB107S
DF005S THRU DB10S
VOLTAGE RANGE
CURRENT
DFS
FEATURES
•
•
•
•
•
1.0 Ampere
0.205 (5.2)
0.195 (5.0)
Glass passivated chip junction
Ideal for surface mounted applications
Low leakage
High forward surge current capability
High temperature soldering guaranteed:
260℃/10 seconds at terminals
0.404 (10.3)
0.386 (9.80)
0.255 (6.5)
0.245 (6.2)
-
+
-
-
0.060 (1.524)
0.040 (1.016)
0.013 (0.330)
0.003 (0.076)
0.047 (1.20)
0.040 (1.02)
MECHANICAL DATA
•
•
•
•
•
50 to 1000 Volts
0.335 (8.51)
0.320 (8.13)
Case: Molded plastic body
Epoxy: UL94V-0 rate flame retardant
Polarity: Molded on body
LeadP: Plated terminals solderable per MIL-STD-202E
method 208C
Weight: 0.04 ounce, 1.0 gram
45
0.013 (0.330)
0.009 (0.241)
O
.135 (3.4)
.115 (2.9)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
Ratings at 25℃ ambient temperature unless otherwise specified
•
Single Phase, half wave, 60Hz, resistive or inductive load
•
For capacitive load derate current by 20%
DB102S
SYMBOLS DB101S
DF005S
DF01S
Maximum Reverse Peak Repetitive Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Output
Current, 0.06”(1.5mm) lead length at T A=40℃
(Note 2)
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
rated load (JEDEC Method)
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage drop
Per Bridge element 1.0A
TA=25℃
Maximum Reverse Current at rated
DC blocking voltage per element
TA=125℃
Typical Junction Capacitance (NOTE 1)
Typical Thermal Resistance (NOTE 2)
Operating and Storage Temperature Range
DB103S
DF02S
DB104S
DF04S
DB105S
DF06S
DB106S
DF08S
DB107S
DF10S
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
UNIT
Volts
Volts
Volts
I(AV)
1.0
Amps
IFSM
50
Amps
I2 t
10
A2s
VF
1.1
Volts
5
0.5
25
40
(-55 to +150)
IR
CJ
RΘJA
TJ ,TSTG
Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts.
2.Unit mounted on P.C.B. with 0.51”×0.51” ( 13×13mm) copper pads.
E-mail: [email protected]
Web Site: www.cnmic.com
µAmps
mAmps
℃/W
VAC
℃
SURFACE MOUNT BRIDGE
DB101S THRU DB107S
DF005S THRU DB10S
VOLTAGE RANGE
CURRENT
FIG. 2- MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER ELEMENT
1.2
70
1.0
60
PEAK FORWARD SURGE,
CURRENT,(A)
AVERAGE FORWARD OUTPUT,
CURRENT,( A)
FIG. 1- DERATING CURVE FOR
OUTPUT RECTIFIED CURRENT
0.8
0.6
Single Phase
Half Wave 60Hz
Resistive or Inductive Load
0.2
0
0
25
75
40 50
100
150
125
Tj =T j max
Single Half Sine-Wave
(JEDEC Method)
50
40
30
20
10
175
0
1 CYCLE
1
2
AMBIENT TEMPERATURE, ℃
6
8 10
40
20
60 80 100
FIG. 4- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
20
100
10
INSTANTANEOUS REVERSE CURRENT,
(μ A)
INSTANTANEOUS FORWARD CURRENT,
( A)
4
NUMBER OF CYCLES AT 60 Hz
FIG. 3- TYPICAL FORWORD CHARACTERISTICS
PER BRIDGE ELEMENT
1.0
0.1
0.01
Tj =25℃
PULSE WIDTH=300μs
1% DUTY CYCLE
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE,(V)
100
JUNCTION CAPACITANCE, (pF)
1.0 Ampere
DF10S
DF005S
THRU
DB101S
DB107S
RATINGS AND CHARACTERISTIC CURVES
0.4
50 to 1000 Volts
10
Tj =125℃
1.0
0.1
Tj =25℃
FIG. 5- TYPICAL JUNCTION CAPACITANCE
PER BRIDGE ELEMENT
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK
REVERSE VOLTAGE, (%)
10
T j =25℃
f=1MHz
Vsig=50mVp-p
1
0.1
1.0
10
100
REVRESE VOLTAGE, (V)
E-mail: [email protected]
Web Site: www.cnmic.com
120
140
Similar pages