Aluminum Electrolytic Capacitors/ MC Snap-in Type Series: MC Country of Origin Type : TS Japan n Features Endurance: 105°C 2000 h U.S.A Malaysia n Recommended Applications Smoothing circuits, AC adaptor n Specifications Category temp. range -40 to + 105°C Rated W.V. Range 200 to 250 V .DC 120 to 1500 µ F Nominal Cap. Range Capacitance Tolerance -25 to + 105°C 400 to 450 V .DC 39 to 390 µ F ±20 % (120Hz/+20°C) 0.03 CV (µA) or 3 mA, whichever is smaller, after 5 minutes application of rated working voltage at +20°C. C:Capacitance(µF) V: W.V. (V.DC) DC Leakage Current tan δ Please see the attached standard products list. Frequency (Hz) 50 60 100 120 500 1k 10k to 0.75 0.80 0.95 1.00 1.20 1.25 1.40 Correction Factor After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Frequency Correction Factor for Ripple Current Endurance Capacitance change ±20 % of initial measured value < 200 % of initial specified value tan δ DC leakage current < initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Shelf Life Please contact the factory for detailed information on test methods and standards relating overvoltage characteristics. Overvoltage n Dimensions in mm (not to scale) φD+1.0 max Polarity bar (10.0) 2-φ2.0±0.1 P.V.C. sleeve 10.0±0.1 Vent L+2.0 max Recommended PWB piercing plan i (Standard terminal type) +0.2 0.8 - 0.1 4.0±0.5 i Terminal +0.2 0.8 - 0.1 2.0 max 2.0 max (t= 0.8) (4.0) (3.5) 6.3±1.0 i Bottom of can 1.5 ± 0.2 Bottom of can 1.5±0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 — EE166 — Aluminum Electrolytic Capacitors/MC n Standard Products W.V. Cap. (±20%) (V) (µF) Case size Specification Part No. (Standard Terminals) Dia. Length Ripple tan δ current Terminal Length Terminal Length (120Hz) (120Hz) 6.3mm 4.0mm (+105°C) (+20°C) (Without P.V.C.plate) (Without P.V.C.plate) (mm) (mm) (A) Min.PackagingQ'ty (pcs) 180 22 25 0.90 0.15 ECES2DC181BB ECEC2DC181BB 200 220 22 30 1.00 0.15 ECES2DC221BB ECEC2DC221BB 200 25 25 1.00 0.15 ECES2DC221CB ECEC2DC221CB 200 22 35 1.10 0.15 ECES2DC271BB ECEC2DC271BB 200 25 30 1.10 0.15 ECES2DC271CB ECEC2DC271CB 200 30 25 1.10 0.15 ECES2DC271DB ECEC2DC271DB 100 22 40 1.20 0.15 ECES2DC331BB ECEC2DC331BB 200 25 30 1.20 0.15 ECES2DC331CB ECEC2DC331CB 200 30 25 1.20 0.15 ECES2DC331DB ECEC2DC331DB 100 270 330 390 470 200 560 680 820 1000 1200 22 45 1.30 0.15 ECES2DC391BB ECEC2DC391BB 200 25 35 1.30 0.15 ECES2DC391CB ECEC2DC391CB 200 30 30 1.30 0.15 ECES2DC391DB ECEC2DC391DB 100 22 50 1.40 0.15 ECES2DC471BB ECEC2DC471BB 200 25 40 1.40 0.15 ECES2DC471CB ECEC2DC471CB 200 30 30 1.40 0.15 ECES2DC471DB ECEC2DC471DB 100 25 45 1.50 0.15 ECES2DC561CB ECEC2DC561CB 200 30 35 1.50 0.15 ECES2DC561DB ECEC2DC561DB 100 35 30 1.50 0.15 ECES2DC561EB ECEC2DC561EB 100 25 50 1.70 0.15 ECES2DC681CB ECEC2DC681CB 200 30 40 1.70 0.15 ECES2DC681DB ECEC2DC681DB 100 35 30 1.70 0.15 ECES2DC681EB ECEC2DC681EB 100 30 45 2.00 0.15 ECES2DC821DB ECEC2DC821DB 100 35 35 2.00 0.15 ECES2DC821EB ECEC2DC821EB 100 30 50 2.20 0.15 ECES2DC102DB ECEC2DC102DB 100 35 40 2.20 0.15 ECES2DC102EB ECEC2DC102EB 100 35 45 2.30 0.15 ECES2DC122EB ECEC2DC122EB 100 1500 35 50 2.50 0.15 ECES2DC152EB ECEC2DC152EB 100 120 22 25 0.70 0.15 ECES2EC121BB ECEC2EC121BB 200 150 180 220 250 270 330 390 22 30 0.80 0.15 ECES2EC151BB ECEC2EC151BB 200 25 25 0.80 0.15 ECES2EC151CB ECEC2EC151CB 200 22 35 0.90 0.15 ECES2EC181BB ECEC2EC181BB 200 25 30 0.90 0.15 ECES2EC181CB ECEC2EC181CB 200 22 40 1.00 0.15 ECES2EC221BB ECEC2EC221BB 200 25 30 1.00 0.15 ECES2EC221CB ECEC2EC221CB 200 30 25 1.00 0.15 ECES2EC221DB ECEC2EC221DB 100 22 45 1.10 0.15 ECES2EC271BB ECEC2EC271BB 200 25 35 1.10 0.15 ECES2EC271CB ECEC2EC271CB 200 30 30 1.10 0.15 ECES2EC271DB ECEC2EC271DB 100 22 50 1.20 0.15 ECES2EC331BB ECEC2EC331BB 200 25 40 1.20 0.15 ECES2EC331CB ECEC2EC331CB 200 30 30 1.20 0.15 ECES2EC331DB ECEC2EC331DB 100 25 45 1.30 0.15 ECES2EC391CB ECEC2EC391CB 200 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35xφ45L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 — EE167 — Aluminum Electrolytic Capacitors/ MC n Standard Products W.V. Cap. (±20%) (V) (µF) 390 470 250 Case size Specification Part No. Dia. Length Ripple current tan δ Terminal Length (120Hz) (120Hz) 6.3mm (+105°C) (+20°C) (mm) (mm) (Without P.V.C. plate) (A) Min.PackagingQ'ty (Standard Terminals) Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 30 35 1.30 0.15 ECES2EC391DB ECEC2EC391DB 100 35 30 1.30 0.15 ECES2EC391EB ECEC2EC391EB 100 25 50 1.40 0.15 ECES2EC471CB ECEC2EC471CB 200 30 40 1.40 0.15 ECES2EC471DB ECEC2EC471DB 100 35 30 1.40 0.15 ECES2EC471EB ECEC2EC471EB 100 560 30 45 1.50 0.15 ECES2EC561DB ECEC2EC561DB 100 35 35 1.50 0.15 ECES2EC561EB ECEC2EC561EB 100 680 30 50 1.70 0.15 ECES2EC681DB ECEC2EC681DB 100 35 40 1.70 0.15 ECES2EC681EB ECEC2EC681EB 100 35 45 2.00 0.15 ECES2EC821EB ECEC2EC821EB 100 1000 35 50 2.20 0.15 ECES2EC102EB ECEC2EC102EB 100 47 22 25 0.47 0.15 ECES2GC470BB ECEC2GC470BB 200 56 22 30 0.51 0.15 ECES2GC560BB ECEC2GC560BB 200 25 25 0.51 0.15 ECES2GC560CB ECEC2GC560CB 200 820 68 82 100 120 400 150 180 220 270 330 22 35 0.56 0.15 ECES2GC680BB ECEC2GC680BB 200 25 30 0.56 0.15 ECES2GC680CB ECEC2GC680CB 200 22 40 0.64 0.15 ECES2GC820BB ECEC2GC820BB 200 25 30 0.64 0.15 ECES2GC820CB ECEC2GC820CB 200 30 25 0.64 0.15 ECES2GC820DB ECEC2GC820DB 100 22 45 0.69 0.15 ECES2GC101BB ECEC2GC101BB 200 25 35 0.69 0.15 ECES2GC101CB ECEC2GC101CB 200 30 30 0.69 0.15 ECES2GC101DB ECEC2GC101DB 100 22 50 0.75 0.15 ECES2GC121BB ECEC2GC121BB 200 25 40 0.75 0.15 ECES2GC121CB ECEC2GC121CB 200 30 30 0.75 0.15 ECES2GC121DB ECEC2GC121DB 100 25 45 0.82 0.15 ECES2GC151CB ECEC2GC151CB 200 30 35 0.82 0.15 ECES2GC151DB ECEC2GC151DB 100 35 30 0.82 0.15 ECES2GC151EB ECEC2GC151EB 100 25 50 0.90 0.15 ECES2GC181CB ECEC2GC181CB 200 30 40 0.90 0.15 ECES2GC181DB ECEC2GC181DB 100 35 30 0.90 0.15 ECES2GC181EB ECEC2GC181EB 100 30 45 1.00 0.15 ECES2GC221DB ECEC2GC221DB 100 35 35 1.00 0.15 ECES2GC221EB ECEC2GC221EB 100 30 50 1.10 0.15 ECES2GC271DB ECEC2GC271DB 100 35 40 1.10 0.15 ECES2GC271EB ECEC2GC271EB 100 35 45 1.20 0.15 ECES2GC331EB ECEC2GC331EB 100 390 35 50 1.30 0.15 ECES2GC391EB ECEC2GC391EB 100 39 22 25 0.37 0.15 ECES2WC390BB ECEC2WC390BB 200 47 22 30 0.40 0.15 ECES2WC470BB ECEC2WC470BB 200 25 25 0.40 0.15 ECES2WC470CB ECEC2WC470CB 200 56 22 35 0.47 0.15 ECES2WC560BB ECEC2WC560BB 200 25 30 0.47 0.15 ECES2WC560CB ECEC2WC560CB 200 450 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35xφ45L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 — EE168 — Aluminum Electrolytic Capacitors/MC n Standard Products W.V. Cap. (±20%) (V) (µF) 68 82 100 450 120 150 180 Case size Dia. (mm) Specification Part No. Ripple (Standard Terminals) tan δ current Terminal Length (120Hz) (120Hz) Terminal Length 6.3mm 4.0mm (+105°C) (+20°C) (Without P.V.C. plate) (Without P.V.C. plate) (mm) (A) Min.PackagingQ'ty Length (pcs) 22 40 0.53 0.15 ECES2WC680BB ECEC2WC680BB 200 25 30 0.53 0.15 ECES2WC680CB ECEC2WC680CB 200 30 25 0.53 0.15 ECES2WC680DB ECEC2WC680DB 100 22 45 0.56 0.15 ECES2WC820BB ECEC2WC820BB 200 25 35 0.56 0.15 ECES2WC820CB ECEC2WC820CB 200 30 30 0.56 0.15 ECES2WC820DB ECEC2WC820DB 100 22 50 0.61 0.15 ECES2WC101BB ECEC2WC101BB 200 25 40 0.61 0.15 ECES2WC101CB ECEC2WC101CB 200 30 30 0.61 0.15 ECES2WC101DB ECEC2WC101DB 100 25 45 0.67 0.15 ECES2WC121CB ECEC2WC121CB 200 30 35 0.67 0.15 ECES2WC121DB ECEC2WC121DB 100 25 50 0.75 0.15 ECES2WC151CB ECEC2WC151CB 200 30 40 0.75 0.15 ECES2WC151DB ECEC2WC151DB 100 35 30 0.75 0.15 ECES2WC151EB ECEC2WC151EB 100 30 45 0.82 0.15 ECES2WC181DB ECEC2WC181DB 100 35 35 0.82 0.15 ECES2WC181EB ECEC2WC181EB 100 220 30 50 0.92 0.15 ECES2WC221DB ECEC2WC221DB 100 35 40 0.92 0.15 ECES2WC221EB ECEC2WC221EB 100 270 35 45 1.00 0.15 ECES2WC271EB ECEC2WC271EB 100 330 35 50 1.10 0.15 ECES2WC331EB ECEC2WC331EB 100 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35xφ45L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar. 2005 — EE169 —