MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life forφ4 toφ8 product, 105℃ FL Series ・Long life forφ4×5L toφ8×7L mm range ・Endurance with ripple current : 3,000 hours at 105℃ ・Suitable for long life products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.50 0.40 0.35 0.30 0.25 0.25 (at 20℃, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Endurance Shelf Life ◆DIMENSIONS [mm] Code : E φD' F±0.5 φd Sleeve (PET : Brown)* F±0.5 ●Terminal or 4min. 15min. L' Gas escape end seal *φ8×5L : Coating case 5mm Height φD φd F φD' L' 7mm Height 8 6.3 5 4 0.45 0.45 0.45 0.45 1.5 2.0 2.5 2.5 φD+0.5max. L+1.0max. 8 6.3 5 4 0.45 0.45 0.45 0.45 1.5 2.0 2.5 3.5 φD+0.5max. L+1.0max. φD φd F φD' L' ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E F L - AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 205 CAT. No. E1001Q MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life forφ4 toφ8 product, 105℃ FLSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (µF) Case size φD×L(mm) 33 47 56 82 100 150 220 270 22 33 33 47 68 100 150 220 15 22 22 33 47 68 100 150 10 15 15 22 33 56 68 100 4.7 6.8 10 10 22 22 33 47 1.0 2.2 3.3 4.7 4.7 6.8 10 15 22 22 tanδ 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 4×5 4×5 4×5 4×7 5×5 5×7 6.3×5 6.3×7 8×5 8×7 Impedance (Ω max./20℃, 100kHz) 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 5.4 4.5 3.1 2.5 1.7 1.3 1.5 0.90 19 14 11 9.0 6.0 4.8 2.9 2.2 2.6 1.6 Rated ripple current (mArms/105℃, 100kHz) 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 37 44 57 70 82 116 110 162 18 22 26 30 40 50 63 90 84 120 Part No. EFL-6R3E□□330MD05D EFL-6R3E□□470MD07D EFL-6R3E□□560ME05D EFL-6R3E□□820ME07D EFL-6R3E□□101MF05D EFL-6R3E□□151MF07D EFL-6R3E□□221MH05G EFL-6R3E□□271MH07D EFL-100E□□220MD05D EFL-100E□□330MD07D EFL-100E□□330ME05D EFL-100E□□470ME07D EFL-100E□□680MF05D EFL-100E□□101MF07D EFL-100E□□151MH05G EFL-100E□□221MH07D EFL-160E□□150MD05D EFL-160E□□220MD07D EFL-160E□□220ME05D EFL-160E□□330ME07D EFL-160E□□470MF05D EFL-160E□□680MF07D EFL-160E□□101MH05G EFL-160E□□151MH07D EFL-250E□□100MD05D EFL-250E□□150MD07D EFL-250E□□150ME05D EFL-250E□□220ME07D EFL-250E□□330MF05D EFL-250E□□560MF07D EFL-250E□□680MH05G EFL-250E□□101MH07D EFL-350E□□4R7MD05D EFL-350E□□6R8MD07D EFL-350E□□100ME05D EFL-350E□□100ME07D EFL-350E□□220MF05D EFL-350E□□220MF07D EFL-350E□□330MH05G EFL-350E□□470MH07D EFL-500E□□1R0MD05D EFL-500E□□2R2MD05D EFL-500E□□3R3MD05D EFL-500E□□4R7MD07D EFL-500E□□4R7ME05D EFL-500E□□6R8ME07D EFL-500E□□100MF05D EFL-500E□□150MF07D EFL-500E□□220MH05G EFL-500E□□220MH07D □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) to 4.7 to 10 to 220 to Frequency(Hz) 3.3 6.8 150 270 120 0.20 0.35 0.40 0.50 1k 0.66 0.70 0.75 0.85 10k 0.90 0.90 0.90 0.94 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 206 CAT. No. E1001Q