Magnetics Make Possible High Power High Performance Molded Surface Mount Inductors Model HM72B-06 Series Features Operating Temperature Range -40°C to +130°C Temperature Rise, Maximum +50°C Operating Frequency Up to 3MHz RoHS Compliant Specification @ 25°C Part Number HM72B-06R10LF HM72B-06R15LF HM72B-06R22LF HM72B-06R33LF HM72B-06R47LF HM72B-06R68LF HM72B-06R82LF HM72B-061R0LF HM72B-061R5LF HM72B-062R2LF HM72B-063R3LF HM72B-064R7LF HM72B-066R8LF HM72B-06100LF HM72B-06220LF HM72B-06330LF DCR (mΩ) Inductance(1) μH±20% Heating Current(2) (Adc) Isat(3) (Adc) Typ. Max. 0.10 0.15 0.22 0.33 0.47 0.68 0.82 1.00 1.50 2.20 3.30 4.70 6.80 10.0 22.0 33.0 26.2 23.3 20.3 18.0 16.1 14.4 12.0 10.3 8.4 8.3 6.6 5.4 4.1 3.2 2.2 1.8 60.0 52.0 40.0 30.0 26.0 25.0 24.0 22.0 18.0 14.0 13.5 10.0 8.0 7.0 4.5 3.5 1.5 1.9 2.5 3.2 4.0 5.0 7.2 9.0 13.0 15.0 26.5 35.0 62.0 100.0 219.0 302.0 1.7 2.5 2.8 3.9 4.2 5.5 8.0 10.0 14.0 20.0 28.0 40.0 68.0 105.0 241.0 332.0 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the DC current which causes the component temperature to increase by 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. Outline Dimensions (mm) Top View Side View Bottom View Recommended PCB layout General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com © TT Electronics plc Rev. 01 High Power High Performance Molded Surface Mount Inductors Make Possible Model HM72B-06 Series Electrical Characteristic @ 20°C Packaging / Ordering Information One reel (13”) 2000 pcs One shipping carton (6 reels) 12000 pcs Ordering Information HM72B - 06 R33 LF TR13 Model Series Case Size Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10-H, “R” denotes the decimal point. 13” tape & reel packing Lead Free General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com © TT Electronics plc Rev. 01